I supposed you could set something up with ssh, so PC1 tunnels a port to
its own DNS port via sshd, but it's going to be significantly harder and
less useful than ipmasq.
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assist
No, certainly not that a human would notice. It's an interesting question
whether there's a measurable delay at all -- I don't know the answer to
that one.
Another solution, of course, is to put it in a new partition and then
mount the partition at /opt.
ap
--
I'd be shocked if IE worked reliably under wine, but would also be happy
to find out otherwise. My experience is that MS apps are the worst trying
to run under wine (presumably because of "undocumented" OS features). If
I were in your shoes I'd spring for a copy of VMWare and run a virtual
machine
I've got an Epson Perfection 1640 Office scanner, which includes a sheet
feeder. I bought a cheap SCSI card for it (it will use SCSI or
USB) because when I bought it I was still running a 2.2.x kernel which had
mediocre USB support. It's pretty fast for scanning - I'd guess less than
a minute per
I have a very similar board, the GA-7VAX, and have got everything except
the sensors working. I haven't worked much on the sensors, since I don't
care much about them. Got the sound working only recently, and with a fair
amount of trouble, but can send you info on how I did it if you'd like.
-
On Tue, 4 Mar 2003, stan wrote:
> [snip]
> 13:58:15 up 249 days, 5:48, 1 user, load average: 0.35, 0.32, 0.36
>
> [EMAIL PROTECTED]:~# cat /etc/debian_version
> testing/unstable
> [snip]
> That's certainly "stab;e"enough for em. And it gets apt-get dist-upgraded
> pretty much every weekday mor
I have the same chip working on my machine (a Gateway 7VAX motherboard
with the same chipset).
You will need kernel-source-2.4.20 and kernel-headers-2.4.20 installed to
do the compilation, not just kernel-package. If you do have these, make
sure your driver download is pointing at the right kernel
I've got the same situation - different card (it's a Belkin) but same
module, same errors, same (lack of) performance problem. It hasn't caused
any problem for me in the roughly 6 months I've been using it.
ap
--
Andrew J Perrin
On Wed, 22 Oct 2003, Magnus von Koeller wrote:
> On Wednesday 22 October 2003 12:05, Joachim Fahnenmueller wrote:
> > Good idea. Not only look for error messages but also for _success_
> > messages, at some point it should say that it found the device.
>
> Now, what if it does report success but s
I'm no expert here, but I think the fact that this works means that ide-cd
has got /dev/hdc, which is why ide-scsi doesn't grab it. I think there's
an option to tell ide-cd to explicitly ignore /dev/hdc, but I don't know
what it is.
ap
-
I did a dist-upgrade yesterday in order to move to sarge, which I needed
for various reasons. Part of the upgrade included a postgresql upgrade,
which was fine; the dialog asked if I wanted to save backups, I said yes,
and put them in /data0/backups/postgres. Now none of my databases are
there:
[
(at) unc.edu
On Wed, 29 Oct 2003, Andrew Perrin wrote:
> I did a dist-upgrade yesterday in order to move to sarge, which I needed
> for various reasons. Part of the upgrade included a postgresql upgrade,
> which was fine; the dialog asked if I wanted to save backups, I said yes,
>
Works fine for me on an HP digital camera with exactly the same path
structure. I usually just mv the pictures and the camera figures it out.
It also works the other way: if I copy a .jpg picture to the camera it
ends up in the camera's stack and can be viewed on the internal LCD.
ap
---
Greetings-
In expectation of a new palm pilot arriving soon, I need to add two
modules to my system: usbserial and visor. What I've done in the past is
to do a make menuconfig; select the new modules; make-kpkg clean;
make-kpkg --revision xx kernel_image; make-kpkg modules_image; cd
/usr/src; dpk
Greetings-
I'm running debian woody on a home machine that's behind an NAT
masquerader (also woody). The home machine runs the OpenAFS client to
connect to the UNC campus's AFS shared directory space. Generally this
works fine, but there's one situation that consistently causes a problem.
The sce
r of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Thu, 23 Jan 2003, David Z Maze wrote:
> Andrew Perrin <[EMAIL PROTECTED]> writes:
> > I'm running debian woody on a home machine that's behind an NAT
> > masquerader (al
Where is the "concat" function supposed to come from? The error you
reference means that, on line 31 of the script, you call a function called
"concat". Perl assumes that unqualified function names are in the main
namespace, which is why it looks for &main::concat : & refers to a
function, main to
For Perl, definitely install and use cperl-mode, which will let you do
lots of work with brace matching and indenting. I like syntax
highlighting, but you can always turn it off by not invoking
global-font-lock-mode.
Best,
Andy
Sure - to complete the prior command beginning with ls, do:
!ls
which will re-execute the last comment beginning with "ls".
If you need finer-grained history, use the command:
history
which will let you copy-and-paste a prior command.
ap
--
I discovered this while trying to get sound working on my desktop
machine. Basically, a SCSI CD-RW that once worked has simply stopped
working, as far as I can tell.
Details: the SCSI card is:
00:0a.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly
NCR) 53c810 (rev 23)
Subsyst
Greetings-
I'd like to use kernel 2.4.20 because (apparently) it drives my machine's
built-in sound
ref:
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=20021218232653.45c6eac7.cgrimland%40yahoo.com.lucky.linux.kernel&rnum=6&prev=/groups%3Fhl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DU
A standard is "Learning Perl"
(http://www.bookpool.com/.x/h6ph9apwz1/sm/0596001320)
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andre
Emacs... what else is there? (ducks)
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Fri, 31 Jan 2003, ian
Check out the envlab package; usage:
\documentclass{letter}
\usepackage[businessenvelope,noprintreturnaddress,nocapaddress]{envlab}
...
\makelabels
\begin{document}
\begin{letter}{}
\end{letter}
\end{document}
--
Andrew J Perrin
On Tue, 11 Feb 2003, Nori Heikkinen wrote:
> on Tue, 11 Feb 2003 06:37:53PM -0500, Derrick 'dman' Hudson insinuated:
> [snip]
> speaking of configuring -- where should the .sty file go? i tried
> just putting the whole envlab directory in /usr/share/texmf/tex/latex/
> -- and i made all the permi
I have the same motherboard, and have not managed (so far) to make it
work. This is my lspci -vv for it:
00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 50)
Subsystem: Giga-byte Technology: Unknown device a002
Control: I/O+ Mem- BusMaster- Spe
Thank you for this - it got me further than I had been before. But I still
have no sound.
When I used the modules.conf you suggested, I got "Intel ICH Audio Card
Not Found". But if I switch to uncomment the snd-via82xx line, the
modules load perfectly, and I'm able to run the alsamixer correctly.
olina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Thu, 13 Feb 2003, Gemini wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Le Jeudi 13 Février 2003 18:55, Andrew Perrin a écrit :
> > Thank you for this - it got me further than I had been before.
I have a home network that includes a linux machine using iptables to NAT
packets from three user machines: a laptop (debian 3.0, 2.4.18 kernel), a
desktop (debian 3.0, 2.4.20 kernel) and a windows machine. The two debian
machines run openAFS clients to connect to UNC's AFS servers.
This setup has
I'm trying to upgrade openAFS to 1.2.8 (the newest version) by following
the directions at
http://www.openafs.org/dl/openafs/1.2.8/debian-3.0/README .
I've changed the appropriate lines in my /etc/apt/sources.list file, but
when I try apt-get update I get:
joehill:~# apt-get update
Hit http://www
Greetings-
Setting up a new computer (an IBM NetVista) that has an Intel 10/100 VE
adapter built in, I'm unable to use a net install.
What I did was to burn a CD with the vanilla kernel setup, and boot to it.
I can boot fine, but when I try to load the eepro100 module, I get
"init_module: no such
Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Tue, 16 Sep 2003, Rich Puhek wrote:
>
> Andrew Perrin wrote:
>
> > Greetings-
> >
> > Setting up a new computer (an IBM NetVista) that has an Intel 10/100 VE
> > adapter built in, I'm unabl
On Sat, 20 Sep 2003, Bob Proulx wrote:
> Andrew Perrin wrote:
> > Unfortunately, I tried 2.4bf with no luck. It includes eepro100, which
> > fails, but not e100 (as far as I could tell).
>
> The e100 shows up in (at least) the 2.4.20 and later kernels. It is a
> module an
There's probably an easier way than this, but you could use perl to fork()
the bplay processes, so they don't block.
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hi
On Sun, 5 Oct 2003, Bengt Thure'e wrote:
> Thanks, but it sort of demands an internet connection. I hope I can use
> a very old laptop (Pentium 100), and no internet connection... Just to
> put her somewhere and she can hack and slash at the keyboard... :-)
>
My son has loved emacs for just this
Greetings-
I just built a new machine (AMD XP 2200+, 1G RAM), and I'm trying to do a
network install of woody. I haven't done this, since I haven't inaugurated
a new machine since potato.
I created and verified the rescue, root, and driver floppies, and booted
to the rescue floppy. But on bootin
I fear I've done something very wrong here. I'm trying to stay up to date,
so I run apt-get update; apt-get upgrade on a regular basis.
This time I paid attention; quite a vew packages were held back, so I
tried to install them. I found that libc6 was old:
ii libc6 2.2.4-5GNU C
.
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Fri, 11 Oct 2002, Seneca wrote:
> On Fri, Oct 11, 2002 at 03:09:02PM -0400, Andrew Per
On Fri, 11 Oct 2002, Osamu Aoki wrote:
> Hi,
>
> You need to be more clear on your system configuration (distribution,
> preferences, ...) but let bme try help you.
Sorry. It's a woody machine, upgraded when woody was testing. Nothing all
that special about it; it's got a custom-compiled kern
, Oct 11, 2002 at 03:09:02PM -0400, Andrew Perrin wrote:
>
> >> I fear I've done something very wrong here. I'm trying to stay up to date,
> >> so I run apt-get update; apt-get upgrade on a regular basis.
>
> >> This time I paid attention; quite a
Greetings-
Setting up a new machine, I'm trying to run the openafs client from behind
a firewall. The machine that is the firewall can use the client fine, but
when I try to start openafs on the machine behind the firewall I get:
joehill:~# /etc/init.d/openafs-client start
Starting AFS services
Greetings-
In setting up my new machine, I've run into an odd problem. When the
machine boots, the routing table doesn't get restored correctly. I have
to type the following:
route add 192.168.0.3 eth0
route add default gw 192.168.0.3
in order to use any networking.
Here's my /etc/network/in
Thanks to all who replied - it was indeed carelessness on my part. I
copied the information from my other debian machine, but took it from eth1
(the interface connected to the DSL router) instead of eth0 (the one for
the internal network).
Thanks,
Andy
---
I haven't used it (yet) but onshore-timesheet looks promising.
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
O
You need to build USB support, either into the kernel or as
modules. Looks like usb-uhci exists, which means you need to first
load usbcore. Alternatively, it's possible you have an ohci system. Try
the following:
insmod usbcore
insmod usb-uhci
insmod usb-ohci
insmod usb-storage
And see what
On Tue, 15 Oct 2002, Johannes Graumann wrote:
> Seems like no luck to me, so here's the lspci output:
I agree.
> 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System
>Controller (rev 14)
> 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge
> 00:
Try it out - plug it into the box, boot up, and do:
lspci
That will give you a listing for the type of card it is; mine gives:
00:02.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
Most controllers are one
What are you trying to do? telnet pop. 110 tells telnet to find
a machine called "pop.hostname" and connect to port 110, which is
equivalent to the pop3 port. I don't think that's what you're looking for.
ap
--
Andrew J Perrin -
On Fri, 18 Oct 2002, Richard Kimber wrote:
> On Fri, 18 Oct 2002 13:42:04 -0400 (EDT)
> Andrew Perrin <[EMAIL PROTECTED]> wrote:
>
> > What are you trying to do? telnet pop. 110 tells telnet to
> > find a machine called "pop.hostname" and connect to port 110
What happens when you try to telnet kimber 110? If that succeeds, there's
some problem with the setup of your POP server in terms of compatibility
with the client. If it fails, there's a network problem.
ap
--
Andrew J Perrin -
Check /var/log/messages and /var/log/syslog as the device is plugged into,
and removed from, the USB port. That sometimes provides clues as to what
the drivers are doing.
Also check /proc/bus/usb for information on what's being seen.
I've never used a digital camera so don't have anything more sp
This is not a complete solution, but the Date::Manip module in perl has
some of this in it - you can get, for example, "today - four weeks".
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U
On Mon, 21 Oct 2002, Jamin W.Collins wrote:
> Without a doubt. Why not educate your friends about how their PCs work?
> A fundamental problem today is that people don't understand the "how" and
> "why". To attempt to protect the user from how a PC operates is IMHO to
> do much more harm than go
On Wed, 23 Oct 2002, Lance Hoffmeyer wrote:
The problem is:
> open(FILE,">eltonjohn.txt");
Here, you open FILE for writing, but then...
> [snip]
>$smtp->datasend(FILE);
Here you try to read from it.
That won't work in any case; you can't read from a writing file handle.
But you also hav
Can you post your XFree86Config-4 file? I've got a GF2 card running just
fine under debian 3.0.
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECT
Greetings-
On a new box I just built, the load average has been 3.00 for a couple of
days now, with really no significant work being done. The box is a pretty
powerful one (AMD XP 2200+, 1GB RAM, plenty of storage) and it's really
not doing anything most of the time - email, mozilla, openoffice,
Greetings-
I'm trying to get lm-sensors to work, mainly to monitor the CPU
temperature in my machine. I know the chip is an lm78, as reported by the
following output from sensors-detect:
Probing for `National Semiconductor LM78'
Trying address 0x0290... Success!
(confidence 7, driver `lm78
Thanks to all who responded. It appears that, indeed, it was khubd's D
process that was causing the "problem". That, in turn, is related to
problems I've been having with USB on that machine. You may hear more
about those problems on the list shortly, but this one is solved.
ap
--
On Mon, 4 Nov 2002, Robert Ian Smit wrote:
> I was surprised that this issue took down the system on Linux.
> I understand, as nate explained, that hardware errors will always
> result in trouble but I expected the kernel to react differently.
> (Or is this a limitation of x86 or the issue you men
I don't know that card, but I've used this one:
http://www.pcwebshopper.com/pcibushigbus.html
Several times with good results.
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Car
On Wed, 27 Nov 2002, Nori Heikkinen wrote:
> has anyone had a monitor just up and die on them before? did anything
> trigger it, do you think, or was it just random?
Yes, I have. And it was even at Swarthmore! 'Course back then it was an
IBM green-screen monitor connected to my XT compatible.
Put it in /etc/modules
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Wed, 27 Nov 2002, Ernesto Marquina wrot
You might want to reconsider the project, frankly - why not make different
root passwords for different machines? That would seem to be a more secure
alternative. You can make them systematically different to save yourself
memorizing them all, by (for example) using the second letter of the
hostnam
Wed, 4 Dec 2002, sean finney wrote:
> On Wed, Dec 04, 2002 at 04:57:27PM -0500, Andrew Perrin wrote:
> > You might want to reconsider the project, frankly - why not make different
> > root passwords for different machines? That would seem to be a more secure
> > alternative.
On Thu, 5 Dec 2002, Cameron Hutchison wrote:
> Once upon a time Andrew Perrin said...
> > No, it's not more insecure; you're assuming the hypothetical hacker knows
> > that there is an algorithm, and which character(s) are filled in by it.
>
> ...and you&#x
Just a thought, but do you have ide and/or scsi as modules instead of
compiled into the kernel? You will get this message if the kernel can't
mount the root partition because it doesn't have the necessary drivers to
talk to the disk on which the root partition sits. That is, if / is on an
ide disk
On Thu, 5 Dec 2002, Pigeon wrote:
> On Wed, Dec 04, 2002 at 07:58:19PM -0500, Andrew Perrin wrote:
> > Take the canonical, one-password case, and give me a reasonably good
> > password, say one generated from the phrase "I Procrastinate On Grading
> > Papers By Deb
Greetings-
I'm trying to install woody on a laptop that has a USB floppy drive. I
therefore boot from the CD-ROM drive to the Net Install/ Base .deb's CD
(downloaded from http://people.debian.org/~dwhedon/boot-floppies/). It
boots fine and lets me partition and mount, but then I'm stuck; if I go t
s first, by running the
"Configure Device Driver Modules" step
This is ironic since it's that step I'm in
I think it has to do with lack of PCMCIA support for the drive in which
the CD is.
ap
>
> -g
>
> On Tue, Dec 10, 2002 at 02:09:06PM -0500, Andrew
On 10 Dec 2002, Shyamal Prasad wrote:
> Try booting with "ide1=0x180,0x386" as parameters to the kernel. Some
> of those Sony machines have all kind of nast hacks in them.
That did it - thanks! The debian install is now happily eating my
cable modem's bandwidth.
ap
On Wed, 11 Dec 2002, Barry Cugley wrote:
> Hello
>
> My system is Debian V3 with kernel 2.4.18 on a 200Mhz Pentium.
>
> I have just installed a USB head card which has two connections for external
> devices. I have connected a CD burner to the head card. The CD burner is an
> external Iomega, P
Nope - depends on the kind of zip drive. ATAPI zip is seen as /dev/hd*
unless you use ide-scsi to explicitly reassign it.
To the OP:
There may be an easier way to do this, but the way I do it with my ATAPI
(IDE) zip drive is to look in /proc/ide/hd*/model:
perrin:~# cat /proc/ide/hdd/model
IOMEGA
The problem is that perl is wait()ing for the daemon to return before
exiting.
>From man perlipc:
Complete Dissociation of Child from Parent
In some cases (starting server processes, for instance)
you'll want to completely dissociate the child process
from the parent.
What's the contents of /proc/usb/*?
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Fri, 8 Aug 2003, Darry
Or, alternatively:
yes | cp -apRv source/* /destination/
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Tu
The past three years I've used TurboTax for the Web - works great, easy to
use, and works flawlessly (this year) with Mozilla as the browser under
debian. Last year for a short time it stopped working, but it miraculously
came back when people complained about linux not being "supported."
ap
Dunno about FEMA, but USPS and Amtrak are "parastatals" -- not strictly
government agencies, but semiprivate institutions chartered by the federal
gov't. Also dunno if that makes a difference
ap
--
Andrew J Perrin - http://ww
Try iptstate - works great for me.
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Thu, 3 Apr 2003, David
TurboTax for the Web did this last year in the US - mozilla worked fine
but they sensed it out of the way. I and others posted complaints to the
bug section about it and the sensing mysteriously disappeared. It didn't
come back this year. You might try the same (although if 4/15 is the
deadline i
I have that bridge on a Gigabyte GA7VAX motherboard. I downloaded the
drivers for the sound chip (which is a Realtek ALC650) from the realtek
website; here's what my lsmod shows for sound:
snd-via82xx 7588 0
snd-pcm56928 0 [snd-via82xx]
snd-timer 1084
Forgive me if this is obvious, but did you un-mute the appropriate
channels with an ALSA mixer? That was my problem originally.
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina
On Tue, 27 May 2003, Jeff wrote:
>
> This ran fine. However, eth0 is not plugged in and I have to wait for
> the DHCP process to timeout. That's why I had initially removed the
> 'dhcp' part from the /etc/network/intefaces file, to speed things up.
> And, once eth0 times out, it gets configured a
On Sun, 1 Jun 2003, Chris Kenrick wrote:
> >
> > fdisk /dev/sdc1 // play with partitions
>
> If I try this with "-l" to list the partitions, there is no output and
> the log file records an error message.
Try just fdisk /dev/sda (if it's a that your device is being assigned to).
>
> Not
Greetings-
I've been trying to move my scanner (an Epson 1640SU) from SCSI to USB in
preparation for a new machine which will not have a SCSI card. I've got
USB working (it mounts a USB memory stick fine) and the scanner module
installed, as well as hotplug. Hotplug notices the scanner and assign
On Wed, 4 Jun 2003, Rolf Erling Robberstad wrote:
> I installed woody over the internet, configured by the
> local DHCP-server. I then downloaded (from debian)
> kernel 2.4.20 from http://www.kernel.org and compiled
> it to get X working (as part of a i810/i815 howto).
>
> The 3c59x-driver was co
On Wed, 4 Jun 2003, Rolf Erling Robberstad wrote:
> It did work before I got the new kernel (downloaded
> the kernel as an ordinary user).
>
> # dhclient eth0
> -didn't help (it is, however present on the machine)
What did it do? Generally dhclient has output.
--
To UNSUBSCRIBE, email to [EMAI
I like my HP laserjet 1200SE, which meets all your criteria. Fast, cheap,
postscript, parallel.
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECT
On Tue, 10 Jun 2003, Allan Wind wrote:
> ...
> It surprised me that you still need to run a driver in the form of a ppd
> to get things going perfectly (otherwise jobs would terminate abnormally
> elsewise, never had that problem with the Texas Instrument aka Sharp
> PostScript printer that I had
On Wed, 11 Jun 2003, [iso-8859-1] Roberto Sanchez wrote:
> what are these languages and what do they mean?
>
> HP PCL 6, HP PCL 5e, HP printer language (emulates Adobe® PostScript®
> Level 2)
PCL is HP's standard page description language; it's adequate but, to
paraphrase Lloyd Bentsen, "it'
[Sorry for the broken thread!]
Allan Wind wrote:
>The psonly-1200 filter does something; otherwise jobs are not terminated
>and
>the printer will kill some jobs after a timeout of 2 min (if I recall
>correctly). Not a big deal, it just surprised me that I needed a filter
>in the
>first place.
On Wed, 11 Jun 2003, Kirk Strauser wrote:
> >> is it worthwhile to upgrade the RAM for light printing duties?
>
> > No.
>
> I disagree. I was able to buy a 3rd-party 64MB module for about $25. At
> that price, why not?
> --
Have you noticed any performance improvement?
---
As a starter, check speeds without the firewall (connected directly to the
T-1). Generally that machine should be more than adequate for the task.
Also check speeds from the clients to the fireall machine. All this will
give you an idea what's wrong.
ap
--
What's the output of:
fdisk /dev/sdb
when the SD is in the slot? If an error, post the contents of
/proc/bus/usb/devices .
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Caroli
df
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
On Mon, 16 Jun 2003, David selby wrote:
> Hello,
>
> I am wri
Mount with an appropriate umask, as in;
mount -tvfat -oumask= /dev/hdb2 /mnt/drivec
will make everything on the mount world-writable.
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U
For some reason on the laptop I just installed debian on, I ended up with
kde and gnome as the default desktops. I want my fvwm back! How do I rid
myself of these?
Thanks.
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistan
Thanks for the advice - eventually I just apt-get removed everything with
"kde" in the name, as well as gnome-control-center and that took care of
it.
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Soc
I'm about to embark on a quest to get my laptop's built-in modem (a
Conexant HSF variet) to work. I don't see any .deb versions of the
drivers, which leads me to believe I have to build from scratch. I have no
problem doing so, but if I've missed something I'd appreciate the
heads-up.
Thanks.
---
PROTECTED] * andrew_perrin (at) unc.edu
On Sat, 14 Dec 2002, Tom Massey wrote:
> * Andrew Perrin <[EMAIL PROTECTED]> [2002-12-13 23:50]:
> > I'm about to embark on a quest to get my laptop's built-in modem (a
> > Conexant HSF variet) to work. I don't see any .deb
What about Back-End? (http://sourceforge.net/projects/back-end/)
Disclaimer: I know nothing about it, just happened to run across it
yesterday.
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology
1 - 100 of 535 matches
Mail list logo
