On Tue 01 Nov 2011 at 09:05:36 -0700, kei...@strucktower.com wrote:
Below are some references. This post is a continuation of the postings
there.
http://lists.debian.org/debian-user/2011/10/msg02257.html
http://lists.debian.org/debian-user/2011/10/msg02567.html
> Here's the pertinent stanza from
Ooops my bad...
After I posted this message I found out that there is another problem with
my configuration so now I am sorry I attached those configuration
files...
Although the interfaces "work" as expected, I later noticed that my syslog
was getting filled with about 15 events logged _
On Tue, 1 Nov 2011 09:05:36 -0700
kei...@strucktower.com wrote:
Nice to hear your success and thanks for sharing the config
[]
>
> Note: this works without using a wpa_supplicant.conf or guessnet.
[.]
As there is only one wired configuration you don't need guessnet;
but for multiple wir
Thank you Brian for showing me that "route -v" is my friend :-) That
really helped me debug this configuration.
Thank you J. Bakshi for your explication of the use of the pre-up and
pre-down instructions.
Turns out that one of the problems with my configuration was that I had
both a "scan_ssid=1"
On Tue, 1 Nov 2011 00:47:27 +
Brian wrote:
> On Mon 31 Oct 2011 at 12:53:21 -0700, kei...@strucktower.com wrote:
>
> > If I boot the laptop with the Ethernet cable plugged in (eth0), that
> > connection works fine.
A good practice might be to down the unused interface.
When using wired po
On Mon 31 Oct 2011 at 12:53:21 -0700, kei...@strucktower.com wrote:
> If I boot the laptop with the Ethernet cable plugged in (eth0), that
> connection works fine. If I then unplug the Ethernet cable I can not
> connect to the outside world via the wireless (eth1). Yet I can ping
> machines inside
Thanks to Brian, Raf, Camaleón, and J Bakshi for helping me out.
I have gotten wpa_supplicant and ifplugd mostly working, with wpa_cli and
wpa-roam.conf. My configuration seems to work in connecting me wirelessly
to several routers in different locations that I use and to free wifi
hotspots (I thi
On Sat 29 Oct 2011 at 11:37:37 +0100, Raf Czlonka wrote:
> Main advantage - you're not keeping your passphrase in clear text on your
> filesystem.
> PSK is precomputed from a passphrase for a specific SSID and passphrase
> cannot be quantified from it.
What difference does that make? A file which
On Fri, Oct 28, 2011 at 06:22:00PM BST, Brian wrote:
> > You don't, for simple setup that is indeed enough.
> > If you have several wireless networks you can keep your interfaces file
> > tidy and organised, not to mention that roaming mode won't work without
> > wpa_supplicant.conf file.
>
> Yes,
On Fri 28 Oct 2011 at 14:54:38 -0700, kei...@strucktower.com wrote:
> I installed ifplugd. Still, the wireless does not work if I unplug the
> Ethernet, but now if I do a ifdown eth1 | ifup eth1 the wireless will now
> connect (most of the time). Following is a session where the process
> worked,
On Fri, 28 Oct 2011 14:54:38 -0700
kei...@strucktower.com wrote:
> Thanks Brian-
>
> I installed ifplugd. Still, the wireless does not work if I unplug the
> Ethernet,
assuming you have ifplugd + guessnet
edit * /etc/default/ifplugd *
INTERFACES="eth0 wlan0"
HOTPLUG_INTERFACES=""
#ARGS="-q -f
Thanks Brian-
I installed ifplugd. Still, the wireless does not work if I unplug the
Ethernet, but now if I do a ifdown eth1 | ifup eth1 the wireless will now
connect (most of the time). Following is a session where the process
worked, followed by my interfaces and ifplugd files. Note a couple of
On Fri 28 Oct 2011 at 18:38:05 +0100, Brian wrote:
> The other
> commands not working is puzzling.
Much too hasty a statement. When the ethernet cable is unplugged the
eth0 interface remains configured. '/sbin/route -n' and '/sbin/if
On Fri 28 Oct 2011 at 10:01:41 -0700, kei...@strucktower.com wrote:
[Snip]
> If I boot the machine with the Ethernet connected, the system uses that
> connection via eth0. If I unplug the Ethernet I then can't get the
> wireless to work unless I reboot. I have tried:
>
> /etc/init.d/networking st
On Fri 28 Oct 2011 at 12:36:26 +0100, Raf Czlonka wrote:
> On Fri, Oct 28, 2011 at 09:46:25AM BST, Brian wrote:
> > As Raf Czlonka has already said, using /etc/network/interfaces and its
> > integration with wpa_supplicant is the way to go. You do not even need a
> > wpa_supplicant.conf file.
>
>
Thank you Brian and Raf-
I learned several things from both of you, and I really appreciate it :-)
It took me several hours with your help- without your help I would still
be struggling with it.
Turns out, Brian was right to warn me about making sure I was using the
correct interface- I was not.
On Fri, Oct 28, 2011 at 07:04:10AM BST, J. Bakshi wrote:
> How can I remove the wpa related entry from rc.local and add directly at
> /etc/interfaces ?
Please read /usr/share/doc/wpasupplicant/README.Debian.gz - you can find
all the answers there.
A couple of hints:
wpa-driver nl80211
wpa-conf
On Fri, 28 Oct 2011 12:36:26 +0100
Raf Czlonka wrote:
> On Fri, Oct 28, 2011 at 09:46:25AM BST, Brian wrote:
> > As Raf Czlonka has already said, using /etc/network/interfaces and its
> > integration with wpa_supplicant is the way to go. You do not even need a
> > wpa_supplicant.conf file.
>
> Y
On Fri, Oct 28, 2011 at 09:46:25AM BST, Brian wrote:
> As Raf Czlonka has already said, using /etc/network/interfaces and its
> integration with wpa_supplicant is the way to go. You do not even need a
> wpa_supplicant.conf file.
You don't, for simple setup that is indeed enough.
If you have severa
On Thu 27 Oct 2011 at 17:42:18 -0700, kei...@strucktower.com wrote:
> BUT... I had actually tried the wext driver as well...and it had failed
> with this output:
>
> root@eve:~# wpa_supplicant -Dwext -c/etc/wpa_supplicant.conf -ieth0 -d
> Initializing interface 'eth0' conf '/etc/wpa_supplicant.co
On Fri, 28 Oct 2011 00:43:08 +0100
Raf Czlonka wrote:
[]
> There's no need to run wpa_supplicant "by hand" - it integrates nicely
> with ifupdown. You can simply put:
>
> iface eth0 inet dhcp
> wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
>
> into your /etc/network/interfaces (ad
Thanks Brian-
Well, that's confusing... for the man page to say one thing and the
README.Debian file to say another...
OK, so I missed the section that says:
*
A summary of supported drivers follows:
Driver Description
== ===
nl80211Linux 802.11 netlink i
On Thu, Oct 27, 2011 at 10:45:38PM BST, kei...@strucktower.com wrote:
> [...]
> configure wpa_supplicant as a next step. When I try to invoke it I get a
> message saying the ipw driver isn't supported, although the man page for
> wpa_supplicant states that ipw _is_ supported...(for now I am running
On Thu 27 Oct 2011 at 14:45:38 -0700, kei...@strucktower.com wrote:
> I am trying to learn how to setup wireless on one of my old Dell C610
> laptops with an Intel IPW2200 wireless card using command line only. I
> have a fresh install of 7.0 Wheezy (3.0), all updated, and the ipw
> firmware loade
Hi All-
I am trying to learn how to setup wireless on one of my old Dell C610
laptops with an Intel IPW2200 wireless card using command line only. I
have a fresh install of 7.0 Wheezy (3.0), all updated, and the ipw
firmware loaded. According to the Debian Reference Manual I need to
configure wpa_
On Mon, Feb 23, 2009 at 12:57:14PM -0600, Stackpole, Chris wrote:
>
> > From: Thomas H. George [mailto:li...@tomgeorge.info]
> > Sent: Monday, February 23, 2009 12:35 PM
> > Subject: Wireless Setup Problem
> >
> > I installed a Debian system including Gnome 2.22
On Mon, 23 Feb 2009 22:51:24 -0700 (MST)
Robert Holtzman wrote:
> On Mon, 23 Feb 2009, Stackpole, Chris wrote:
>
> >>
> http://wicd.sourceforge.net/download.php
> >>
> >> The OP said he's running Debian, so just 'aptitude install wicd'
> >
> > If he is running Squeeze or Sid, then yes. If h
On Mon, 23 Feb 2009, Stackpole, Chris wrote:
http://wicd.sourceforge.net/download.php
The OP said he's running Debian, so just 'aptitude install wicd'
If he is running Squeeze or Sid, then yes. If he is running Lenny or
older, he needs that link or this one.
http://packages.debian.org/unst
> From: Celejar [mailto:cele...@gmail.com]
> Sent: Monday, February 23, 2009 2:37 PM
> Subject: Re: Wireless Setup Problem
>
> On Mon, 23 Feb 2009 11:51:31 -0800
> Raquel wrote:
>
> ...
>
> > > http://wicd.sourceforge.net/download.php
>
> The OP s
On Mon, 23 Feb 2009 11:51:31 -0800
Raquel wrote:
...
> > http://wicd.sourceforge.net/download.php
The OP said he's running Debian, so just 'aptitude install wicd'
Celejar
--
mailmin.sourceforge.net - remote access via secure (OpenPGP) email
ssuds.sourceforge.net - A Simple Sudoku Solver and Ge
On Mon, 23 Feb 2009 12:57:14 -0600
"Stackpole, Chris" wrote:
> > What could have gone wrong?
>
> I am guessing that you are using network-manager. I usually like
> network-manager, but the one consistent problem I have had with
> network-manager has been setting manual IP addresses. You may want
> From: Thomas H. George [mailto:li...@tomgeorge.info]
> Sent: Monday, February 23, 2009 12:35 PM
> Subject: Wireless Setup Problem
>
> I installed a Debian system including Gnome 2.22.3 on my OLPC (One
> Laptop per Child) laptop from a usb drive and tried to make a wireless
&
I installed a Debian system including Gnome 2.22.3 on my OLPC (One
Laptop per Child) laptop from a usb drive and tried to make a wireless
connection to our LAN.
After numerous tries (details below) I succeeded yesterday afternoon.
Today nothing works. When I put the cursor on the network icon th
On Tue, 2007-12-25 at 00:57 -0600, Javier Vasquez wrote:
> On Dec 25, 2007 12:40 AM, Owen Townend <[EMAIL PROTECTED]> wrote:
> >
> > On Tue, 2007-12-25 at 10:50 +, Mihira Fernando wrote:
> > > On Mon December 24 2007, Javier Vasquez wrote:
> > > > Hello,
> > > >
> > > > I wanted to setup 2 acc
On Dec 25, 2007 12:40 AM, Owen Townend <[EMAIL PROTECTED]> wrote:
>
> On Tue, 2007-12-25 at 10:50 +, Mihira Fernando wrote:
> > On Mon December 24 2007, Javier Vasquez wrote:
> > > Hello,
> > >
> > > I wanted to setup 2 access ponts, 1 per floor in my house (for some
> > > reason the signla doe
On Tue, 2007-12-25 at 10:50 +, Mihira Fernando wrote:
> On Mon December 24 2007, Javier Vasquez wrote:
> > Hello,
> >
> > I wanted to setup 2 access ponts, 1 per floor in my house (for some
> > reason the signla doesn't reach the other floor no matter which one I
> > place the AP).
> A thick f
On Mon December 24 2007, Javier Vasquez wrote:
> Hello,
>
> I wanted to setup 2 access ponts, 1 per floor in my house (for some
> reason the signla doesn't reach the other floor no matter which one I
> place the AP).
A thick floor can do that.
>
> What I've understood is that I then would need to u
Hello,
I wanted to setup 2 access ponts, 1 per floor in my house (for some
reason the signla doesn't reach the other floor no matter which one I
place the AP).
What I've understood is that I then would need to use the same SSID,
and perhaps the same channel, and WEP if used for both, or same WAP
On Friday 26 August 2005 06:23, Ludovic Brenta wrote:
> Ludovic Brenta <[EMAIL PROTECTED]> writes:
> (typo in the To: address, resending)
>
> > Randy Foiles <[EMAIL PROTECTED]> writes:
> >> OK. I am fully confused and ticked off :)
> >> I am unable to configure ndiswrapper past
> >> ndiswrapper -i
Ludovic Brenta <[EMAIL PROTECTED]> writes:
(typo in the To: address, resending)
> Randy Foiles <[EMAIL PROTECTED]> writes:
>> OK. I am fully confused and ticked off :)
>> I am unable to configure ndiswrapper past
>> ndiswrapper -i bcmwl5.inf
>> ndiswrapper -L
>> bcmwl5 installed hardward present/
Hi all,
Can anyone help me with that:
debian:/usr/src# iwconfig --version
iwconfig Wireless-Tools version 27
Compatible with Wireless Extension v11 to v17.
Kernel Currently compiled with Wireless Extension v16.
wlan0 Recommend Wireless Extension v18 or later,
Currentl
On Tue, Jan 06, 2004 at 02:29:31AM +0100, Benedict Verheyen wrote:
> >And just as a matter of fact, D-Link is a crap.
>
> What products do you suggest then? I checked netgear and they seem to
> have properly supported hardware for linux. I check change the D-Link
Not every ``linux support'' is a
- Original Message -
From: "Jan Minar" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, January 05, 2004 1:19 PM
Subject: Re: wireless setup
>On Mon, Jan 05, 2004 at 12:12:46PM +0100, Benedict Verheyen wrote:
>> Any comments on this setup?
>
&
On Mon, Jan 05, 2004 at 12:12:46PM +0100, Benedict Verheyen wrote:
> Any comments on this setup?
Just one general one: network with wires where you can, employ wireless
only when you must. If your business depends on the networking, go for
the licensed bands (i.e. not 2.4 / 5 GHz). Use wireless
Hello,
i'm finally going to replace the cables of my LAN with a wireless solution.
Now, the cable modem is connected to the gateway server's eth0, eth1 is
connected to a hub where the client pc's are connected too. I want the
exact same setup but wireless.
Would this work (all material dlink):
1.
On Monday 07 July 2003 12:58 pm, Kevin McKinley wrote:
>On Mon, 7 Jul 2003 12:39:34 -0400
>
>Jeff Elkins <[EMAIL PROTECTED]> wrote:
>> 'Choose current network environment' screen at boot. Grepping through /etc
>> didn't reveal any startup scripts with a similar message. I seem to recall
>> that bei
On Mon, 7 Jul 2003 12:39:34 -0400
Jeff Elkins <[EMAIL PROTECTED]> wrote:
> 'Choose current network environment' screen at boot. Grepping through /etc
> didn't reveal any startup scripts with a similar message. I seem to recall
> that being mentioned during sid's install, but I can't quite remember
On Monday 07 July 2003 11:02 am, David Z Maze wrote:
>Jeff Elkins <[EMAIL PROTECTED]> writes:
>> 1. I'm now getting a "choose networking interface" option at
>> bootup. How can I disable this?
>
>You must have installed a package that provides this; you might look
>through the list of installed pac
Jeff Elkins <[EMAIL PROTECTED]> writes:
> 1. I'm now getting a "choose networking interface" option at
> bootup. How can I disable this?
You must have installed a package that provides this; you might look
through the list of installed packages in something like aptitude.
Looking through the link
I just installed a Orinoco 802.11b card in a Toshiba laptop running sid and
it's working well, but I have some issues:
1. I'm now getting a "choose networking interface" option at bootup. How can I
disable this?
2. eth0 is non-existant when dhcp attempts to connect for an IP, hence it
fails, a
50 matches
Mail list logo
