age
setup" area. I am pretty sure that M$ Internet Explorer prints the text size
that the user selects. I know that firefox/iceweasel allows you to scale the
printout.
If not then the files could be opened in a word processor and the text size
easily increased.
Hope this helps.
--
Gary Park
quot;lp: Connection refused."
Some success: $ lp -d HPC6180 -h 192.168.1.49:9100 major_surplus.ps
This did get the printer to print, but it printed garbage and blank pages, many
of each.
Also, $ lpr -P HPC6180 -H 192.168.1.49:9100 info/cdrecord_trouble.txt
More garbage!
Any other suggesti
surplus.ps
lp: Connection refused
The cups error log is empty.
I tried using this printer in OpenOffice.org. Using spadmin I chose the "HP
PhotoSmart C6100" print driver and entered the command "lp -d Photosmart". I
just get the response "Error while printing" w
nd_ac97_codec are not loaded. Maybe that was part of the problem.
Also, /dev/dsp and /dev/mixer are now present, for whatever that is worth.
Thanks.
Gary Parker
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I recently lost sound after a dist-upgrade to Debian 4.0. Not sure why, though
I do have a new kernel, 2.6.18-4-486, replacing 2.6.8-2-386.
Now xmms gives an error message, "couldn't open audio."
When I originall installed Debian stable on this computer a year or so ago,
sound worked fine with n
ge and screenshots of the gimp screens at:
http://legomenon.org/~gary/found/
7628.jpg05-Jun-2006 10:28 732k
gimp_message.jpg05-Jun-2006 10:38 31k
gimp_preview.jpg05-Jun-2006 10:2067k
--
Gary Parker
Cayuse, OR
--
To UNSUBSCRIBE, email to [EMAIL
k, e.g.,
0x: pictures
0x00097D35: -rw-r--r-- 2179 .jedrc
I can retrieve the .jedrc file but there is nothing to be found of the pictures
directory in lost+found.
--
Gary Parker
Cayuse, OR
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I have Debian/Stable installed on one partition formatted as ext3. Recently,
when booting into my Debian/Stable partition a check was forced
and fsck failed. I was then prompted to enter the root password and run
fsck manually. It was also mentioned that the file system was mounted
read-only and
free
You would need to comment out (#) or delete the lines for your CDs.
Then do the following:
# apt-get update
# apt-get dist-upgrade
Hope this helps.
Gary Parker
Cayuse, Oregon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Robert William Hutton helms-deep.cable.nu> writes:
>
> Gary Parker wrote:
> > I am running a new installation of Sid and can't seem to get the modem up.
> [snip]
> > I tried setserial as follows:
> > setserial /dev/ttyS4 uart 16550A port 0xdfe0 irq 22 au
followed this with "pppd call provider". I don't believe it activated the
modem.
Any thoughts as to how I might proceed?
Gary Parker
Cayuse, OR
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
unmute
some mixer settings.
I now have sound!
Thanks for the assistance.
Gary Parker
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
nged he permissions on /dev/dsp and /dev/dsp0 and added myself to the audio
group. Now the error is (no such device).
I'm not sure where to go from here. Any suggestions would be helpful.
Gary Parker
Cayuse, Oregon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ib/modules/2.4.18-bf2.4/kernel/drivers/video/
I then used "dpkg-reconfigure xserver-xfree86" to configure xfree86. In
particular to select the xserver as nvidia, remove the dri and Glcore modules
and add the glx module.
Following this:
# modprobe nvidia
Last, I added "nvidia" to /
14 matches
Mail list logo
