Re: Installing modem.

Hoyt Bailey wrote: - Original Message - From: "Jesse Meyer" <[EMAIL PROTECTED]> To: "debian-user" <[EMAIL PROTECTED]> Sent: Sunday, November 09, 2003 11:52 Subject: Re: Installing modem. Your output and mine agree except as follows: Yours:ttyS04 at port 0x7feo (IRQ = 10) is a 16550A M

gtk background

I had to re-install, and suddenly some of the GTKGTK2 based apps are very "dark". I've tried editing the ~/.gtkrc ~/.gtkrc-2.0. Am I missing something very obvious? Thanks -- Rodney D. Myers <[EMAIL PROTECTED]> Registered Linux User #96112 ICQ#: AIM#: YAHOO: 18002350 mailman452

Re: sid - loop of breakage - please help!

Joanne Valentine-Cooper wrote: Okay. On the 1st of November, I ran an apt-get upgrade for the first time since October 26th (yay for apt-listchanges and emailing changelogs!). Around this time, dpkg and libc6 were both updated to verisons 1.10.18 and 2.3.2.ds1-8 respectively. My next update was o

Re: Using an IDE CD-writer via scsi emulation

On Sun, 2003-11-09 at 21:16, Alvin Oga wrote: > On Sun, 9 Nov 2003, Otto Wyss wrote: > > > I knew I could read and write CD's on my system but I lost it during my > > upgrades about a year ago. I remember when I switched the system I > > couldn't write CD and I had documented the "hdd=ide-scsi". B

wireless pcmcia card (g)

Any recommendations for a 802.11g wireless pcmcia card that is supported by linux/debian? I've done a lot of googling and reading, and while 802.11b seems well supported, 11g seems less supported. So any recommendations for setups that work in debian unstable for a laptop would be appreciated

Re: kde in "testing" ?

On Sun, 9 Nov 2003 15:28:30 -0900, Greg Madden <[EMAIL PROTECTED]> wrote in message <[EMAIL PROTECTED]>: > On Sunday 09 November 2003 02:55 pm, stan wrote: > > > Am I mistaken? > > It depends, do you have KDE 2.x installed, or some other backport ? If > so KDE 3 went into testing about a week ag

Re: Using an IDE CD-writer via scsi emulation

On Sun, 9 Nov 2003, Otto Wyss wrote: > I knew I could read and write CD's on my system but I lost it during my > upgrades about a year ago. I remember when I switched the system I > couldn't write CD and I had documented the "hdd=ide-scsi". But after > changeing lilo.conf I can't read CD's anymo

Re: How to start a user process on boot?

* Carsten Schulz <[EMAIL PROTECTED]> [031110 00:12]: > I want to start a p2p program while booting. I tried to write a script > for /etc/init.d it works but only as root. > I want the program starting as a user process (for security reasons). > > How can root start automatically a process as a u

Re: APRS under Linux

On Sun, Nov 09, 2003 at 05:12:50PM +0100 or thereabouts, Arnt Karlsen wrote: > > ..excellent, tell us about it, there will be more people asking the same > question and now is your chance to help'em find _your_ solution. ;-) Well, I suppose that I can do that. :-) I was curious on getting APRS

Re: Using an IDE CD-writer via scsi emulation

On Mon, Nov 10, 2003 at 12:39:07AM +0100, Karol Czachorowski wrote: > On Sun, 9 Nov 2003 21:53:51 +0100 > [EMAIL PROTECTED] (Otto Wyss) wrote: > > > I knew I could read and write CD's on my system but I lost it during my > > upgrades about a year ago. I remember when I switched the system I > > co

Re: ut2003 & OpenGL

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sun, 9 Nov 2003 16:13:37 -0600 "Kevin C. Smith" <[EMAIL PROTECTED]> wrote: > I'm running Debian SID. > After not running games for about a year I reinstalled UT2003, however > it does not run. > > I've search google, but have not found a solution.

lost my Apps - Shells - bash option in Blackbox Menu

Team: Debian Sarge with Blackbox window-manager. Periodically, after an apt-get update, I "lose" some blackbox menu items. After a subsequent apt-get update, they usually come back. But my bash shell option disappeared a few weeks ago, and has never returned. tcsh is all that's left. Nostalgi

Re: Source list help

> From: Wayne Topa <[EMAIL PROTECTED]> > all I do to prevent that is have 2-3 sites for each dist. That way if > one or two are not there (for whatever reason) I get each dist anyway. > > I have seen the error you are getting but I don't care since I have a > valid list from some other site. Ta

Re: X-server errors

Hello Richard! On Sun, Nov 09, 2003 at 01:12:12PM +0100, Richard Lyons wrote: Over the years, using various RH and SuSE versions, and again recently under Debian, I've noticed the list of errors generated by the X-server. Usually, the screen is full of them when dropping back to command line.

Re: fetchmail problem

thanks, I will try that. Cheers Paul On Mon, 2003-11-10 at 00:10, David Jardine wrote: > On Sun, Nov 09, 2003 at 11:27:59AM +0100, David Jardine wrote: > > On Sun, Nov 09, 2003 at 03:01:45PM +1300, Paul William wrote: > > > Hi > > > > > > I am running fetchmail on woody. I want fetchmail to get

Re: apache-ssl or libapache-mod-ssl ?

> Lynn > My first post to this list. Nice of you to join us :) -- .''`. Paul William : :' :Debian admin and user `. `'` `- Debian - when you have better things to do than fixing a system -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Co

Re: sid - loop of breakage - please help!

Hello Joanne! On Sun, Nov 09, 2003 at 02:44:18PM -0500, Joanne Valentine-Cooper wrote: On the 1st of November, I ran an apt-get upgrade for the first time since October 26th (yay for apt-listchanges and emailing changelogs!). Around this time, dpkg and libc6 were both updated to verisons 1.10.18 a

Re: debian install went fine, but windoze slowed to a crawl

on Fri, Nov 07, 2003 at 12:15:11AM -0700, David Millet ([EMAIL PROTECTED]) wrote: > > >>so i just finished my first successful installation of debian (thank > >>you, thank you, i'll be signing autographs until tuesday), originally > >>it was just my win2000 drive in, i left it in there as the ma

Re: kde in "testing" ?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sunday 09 November 2003 02:55 pm, stan wrote: > On Sun, Nov 09, 2003 at 04:52:25PM +0100, Nicos Gollan wrote: > > On Sunday 09 November 2003 16:32, stan wrote: > > > I have several "testing" machines, when I try to do apt-get > > > dist-upgrade on t

Re: virtual terminal not working compaq armada

Peter Baker wrote: hi, i have a compaq armada with debian installed x runs fine, but i when i switch to a virtual terminal ctrl alt f1, ctrl alt f2, etc , i get colored stripes down the screen, its just a mess. is this anything to do with my X settings? surely not? is there any setting that chan

Re: Single-use root account?

Pigeon wrote: > Karsten M. Self wrote: > > echo "set ignoreeof" >> ~/.bashrc Oops! This would probably be what was intended. set -o ignoreeof I am beginning to prefer the newer 'shopt' syntax. shopt -s -o ignoreeof > Cool! (tries it) Oh, it doesn't work (messes about) Ah, > s/set igno

Re: kde in "testing" ?

On Sun, Nov 09, 2003 at 04:52:25PM +0100, Nicos Gollan wrote: > On Sunday 09 November 2003 16:32, stan wrote: > > I have several "testing" machines, when I try to do apt-get dist-upgrade on > > them, they want to remove kde-base. > > > > This seems like a bad idea :-) > > Not really as long as kde

Re: How to start a user process on boot?

Hi Carsten! On Mon, Nov 10, 2003 at 12:12:53AM +0100, Carsten Schulz wrote: I want to start a p2p program while booting. I tried to write a script for /etc/init.d it works but only as root. I want the program starting as a user process (for security reasons). How can root start automatically a p

Re: Gaim needs kernel-headers ?

On Sun, 09 Nov 2003 14:45:37 + John Peter <[EMAIL PROTECTED]> wrote: > I have Sarge and 2.4.22 kernel ( installed and configured by me from > sources). > I allready had installed gaim_0.72-1 wich was compiled from sources and > a.deb produced with Checkinstall . > No kernel headers where need

Re: Using an IDE CD-writer via scsi emulation

On Sun, 9 Nov 2003 21:53:51 +0100 [EMAIL PROTECTED] (Otto Wyss) wrote: > I knew I could read and write CD's on my system but I lost it during my > upgrades about a year ago. I remember when I switched the system I > couldn't write CD and I had documented the "hdd=ide-scsi". But after > changeing l

How to start a user process on boot?

Hi, I want to start a p2p program while booting. I tried to write a script for /etc/init.d it works but only as root. I want the program starting as a user process (for security reasons). How can root start automatically a process as a user? Thanks, Carsten -- To UNSUBSCRIBE, email to [

Re: Installing modem.

- Original Message - From: "Jesse Meyer" <[EMAIL PROTECTED]> To: "debian-user" <[EMAIL PROTECTED]> Sent: Sunday, November 09, 2003 11:52 Subject: Re: Installing modem. Your output and mine agree except as follows: Yours:ttyS04 at port 0x7feo (IRQ = 10) is a 16550A Mine: ttyS04 a

Re: apache-ssl or libapache-mod-ssl ?

"Lynn W." <[EMAIL PROTECTED]> writes: > My question is, given my httpd.conf settings for PHP4 and ColdFusion, > should I apt-get apache-ssl or libapache-mod-ssl? Yes, one of those is probably what you want. :-) You might look at the respective upstream Web pages (http://www.apache-ssl.org/, htt

Re: Source list help

Haines Brown([EMAIL PROTECTED]) is reported to have said: > > Thanks for your input. Hope some lurker might have some suggestion > about what to check. Spent a good part of the morning going back over > apt documentation, and there's nothing in it that seemed helpful. I > don't see that /etc/apt/a

Re: XMMS without X?

On Sat, 8 Nov 2003 16:14:51 -0800, Tom wrote: > > On Sat, Nov 08, 2003 at 04:02:07PM -0800, Tom wrote: > > I use xmms, xmms-flac, and xmms-shell with some custom > > scripts. I do all my interacting with xmms via the command > > line. (I've never understood why every SOUND PLAYER in the > > worl

Re: Retry: F-Prot and Amavis, exim

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sun, Nov 09, 2003 at 10:52:29AM +0100, Mark Maas wrote: > Hi All, > > Giving it a second try to see if I can reach someone who can help me with > this... Looks like something isn't listening on the port it's trying to connect to. - -- .''`.

Re: [OT] routing failed

On Sun, 9 Nov 2003 11:10:52 +0100, David Jardine wrote: > > On Sun, Nov 09, 2003 at 06:18:54AM +0800, csj wrote: > > On Sat, 8 Nov 2003 21:46:15 +0100, > > David Jardine wrote: > > > > > > On Sat, Nov 08, 2003 at 08:51:46AM +0800, csj wrote: > > > > On Sat, 8 Nov 2003 at 01:24:17 +0100, > > > > D

Re: Java on linux

"Hoai Nguyen" <[EMAIL PROTECTED]> writes: > Do you know any java API > for linux that handles mount and umount cdrom. Please set your mailer to send in plain text only, no HTML, and wrap lines at 72 columns... ...but if I needed to do this, I'd use Runtime.exec() to shell out to the normal Unix

Re: Java on linux

On Sat, 2003-11-08 at 08:16, Hoai Nguyen wrote: > Do you know any java API for linux that handles mount and umount > cdrom. > Thanks Don't know of such api and I doubt such exist as it would be os dependent. You could use automount to mount the cdrom on access to do what you want. > > __

Re: Searching for an editor...

On Sun, Nov 09, 2003 at 10:46:33PM +0100, Otto Wyss wrote: > > On Sun, 19 Oct 2003 18:32:47 +0200, Tom <[EMAIL PROTECTED]> wrote: > > > All in all, the built-in editor of Anjuta is exactly what I'm looking Tom > > > > Try Scite, you'll love it. Anjuta's editor is based on it. > > > Sorry for bein

Re: Exim question: open relay?

On Sun, 9 Nov 2003 15:31:54 -0500, Jeff Elkins <[EMAIL PROTECTED]> wrote in message <[EMAIL PROTECTED]>: > On Sunday 09 November 2003 1:45 pm, Jonathan Dowland wrote: > > On Sun, Nov 09, 2003 at 05:20:09PM +0100, Arnt Karlsen wrote: > > > On Sat, 8 Nov 2003 23:44:48 -0500, > > > Jeff Elkins <[EM

ut2003 & OpenGL

I'm running Debian SID. After not running games for about a year I reinstalled UT2003, however it does not run. I've search google, but have not found a solution. I get the following error: ### Could not load OpenGL library History: Exiting due to error ## Quake3, glxgears, armagetro

Re: stdio.h

Hello Jeffrey L. Taylor (<[EMAIL PROTECTED]>) wrote: > What package is the standard C headers in? Try libc6-dev. You can use to search package contents. Or use apt-file. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC8016

Re: Searching for an editor...

> On Sun, 19 Oct 2003 18:32:47 +0200, Tom <[EMAIL PROTECTED]> wrote: > > All in all, the built-in editor of Anjuta is exactly what I'm looking Tom > > Try Scite, you'll love it. Anjuta's editor is based on it. > Sorry for being late but have a look at wxGuide-Editor "http://wxguide.sourceforge.ne

recognition of my cdwriter on woody-system

Hi out there! I 've got the following problem: I built in a Plextor-CD-Writer in my Desktop-PC (with Woody on it) but the machine (kernel) do not recognize it. I put the following command-line into my /etc/lilo.conf append="hdc=ide-scsi" and started lilo again but there is still somet

Re: stdio.h

--On Sunday, November 9, 2003 15:38 -0600 "Jeffrey L. Taylor" <[EMAIL PROTECTED]> wrote: What package is the standard C headers in? dpkg -S stdio.h tells me that it's in libc6-dev. Best regards, Sid -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Cont

stdio.h

What package is the standard C headers in? TIA, Jeffrey -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Motherboard ASUS a7v600: is anybody using this?

On Sun, 09 Nov 2003 12:49:07 -0600 Hanasaki JiJi <[EMAIL PROTECTED]> wrote: > Could I ask about the complete specs and costs of what you put > together? > I have been eye'ing the Asus A7V600 also. These are the parts I was > > looking at.. Off www.newegg.com > > $130 SAPPHIRE ATI RADEON 9

Using an IDE CD-writer via scsi emulation

I knew I could read and write CD's on my system but I lost it during my upgrades about a year ago. I remember when I switched the system I couldn't write CD and I had documented the "hdd=ide-scsi". But after changeing lilo.conf I can't read CD's anymore. So I looked into the CD-Writing-Howto but it

twm gdm session file?

Does anyone have a twm session file for gdm? Mine doesn't seem to be working at the moment, and I can't figure out why. -- Joel Konkle-Parker Webmaster [Ballsome.com] Phone [+1 662-518-1636] E-mail[EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscr

Re: Exim question: open relay?

On Sunday 09 November 2003 1:45 pm, Jonathan Dowland wrote: >On Sun, Nov 09, 2003 at 05:20:09PM +0100, Arnt Karlsen wrote: >> On Sat, 8 Nov 2003 23:44:48 -0500, >> Jeff Elkins <[EMAIL PROTECTED]> wrote in message >> >> <[EMAIL PROTECTED]>: >> > I have just started hosting a domain on my server for

Re: Installing modem.

- Original Message - From: "Charles-Roberts" To: "Hoyt Bailey" <[EMAIL PROTECTED]> Sent: Sunday, November 09, 2003 13:16 Subject: Re: Installing modem. > Hoyt Bailey wrote: > > - Original Message - > > From: "Charles-Roberts" > > To: "Hoyt Bailey" <[EMAIL PROTECTED]> > > Sent:

Re: Source list help

> From: Wayne Topa <[EMAIL PROTECTED]> > > Possibly, but to check, I modify the URL that always works for me > > (http://ftp.br.debian.org/debian) by changing its distribution from > > "woody" to "unstable" (checked to make sure the site does archive this > > distribution), and it still generates

Re: Mutt viewers in the background / Job control

For the archives: On Sat, Nov 08, 2003 at 04:16:23PM -0800, Bill Moseley wrote: > Common question: how do I make the viewer a child of init so that when > mutt exits it's not a zombie waiting on the viewer or closing mutt > doesn't kill the viewer? Well, one answer would seem a script called mu

Re: Installing modem.

- Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, November 09, 2003 09:31 Subject: Re: Installing modem. > On 9 Nov 2003 at 7:24, Hoyt Bailey wrote: > > > I recieved my USR5610B and replaced the Intel winmodem. Turned on the > > computer and it dialed

Re: fast swithichg between X and virtual console - how to?

On Sun, Nov 09, 2003 at 06:54:33PM +, Jonathan Dowland wrote: > On Sat, Nov 08, 2003 at 02:41:32PM -0800, Tom wrote: > > > I've finally discovered my own perfect working environment: Fluxbox w/ > > exactly virtual desktops, using the Mouse wheel to alternate them. > > ... > > It repaints f

sid - loop of breakage - please help!

Okay. On the 1st of November, I ran an apt-get upgrade for the first time since October 26th (yay for apt-listchanges and emailing changelogs!). Around this time, dpkg and libc6 were both updated to verisons 1.10.18 and 2.3.2.ds1-8 respectively. My next update was on November 4. Neither of these

Re: Getting shell back locally or remote on hanging ssh connection

* John Smith <[EMAIL PROTECTED]> [09-11-2003 09:01]: > > after returning to it after five minutes of doing something else. > try experimenting with 'ProtocolKeepAlives' and/or > 'KeepAlive' parameters in your ~/.ssh/config or /etc/ssh/ssh_config. I have used the ProtocolKeepAlives option (KeepAl

Re: Source list help

Haines Brown([EMAIL PROTECTED]) is reported to have said: > > From: Wayne Topa <[EMAIL PROTECTED]> > > > I've been following the thread with interest. While not the nearest > > > repository, I appended the above lines to my /etc/apt/sources.list and > > > as root ran: # aptitutde update. I get the

Re: Single-use root account?

On Sun, Nov 09, 2003 at 03:04:19AM +, Karsten M. Self wrote: > on Sat, Nov 08, 2003 at 10:49:21PM +, Pigeon ([EMAIL PROTECTED]) wrote: > > On Sat, Nov 08, 2003 at 12:28:40PM -0600, Alex Malinovich wrote: > > > On Fri, 2003-11-07 at 23:00, Pigeon wrote: > > > > On Fri, Nov 07, 2003 at 12:27:

Re: Any simple way to add modules w/o recompiling the kernel?

On Fri, Nov 07, 2003 at 07:30:19AM -0500, Andrew Perrin wrote: > Greetings- > > In expectation of a new palm pilot arriving soon, I need to add two > modules to my system: usbserial and visor. What I've done in the past is > to do a make menuconfig; select the new modules; make-kpkg clean; > make

Re: fast swithichg between X and virtual console - how to?

On Sat, Nov 08, 2003 at 02:41:32PM -0800, Tom wrote: > I've finally discovered my own perfect working environment: Fluxbox w/ > exactly virtual desktops, using the Mouse wheel to alternate them. > ... > It repaints fast as FUCK plus it's all anti-aliased. I'm sure I could > go even more mini

Re: Doom problems?

On Sat, Nov 08, 2003 at 12:57:21PM -0500, Joel Konkle-Parker wrote: > Andreas Janssen wrote: > >I can't say what exactly your problem is, but Debian comes with several > >prepackaged Doom clones (for example lxdoom, prboom). prboom will also > >allow you to run the game at higher resolutions. > >

Re: Doom problems?

On Sat, Nov 08, 2003 at 12:40:34PM -0600, Alex Malinovich wrote: > On Sat, 2003-11-08 at 11:57, Joel Konkle-Parker wrote: > > Andreas Janssen wrote: > > > I can't say what exactly your problem is, but Debian comes with several > > > prepackaged Doom clones (for example lxdoom, prboom). prboom will

XMMS Interface (Re: XMMS without X?)

On Sat, Nov 08, 2003 at 04:02:07PM -0800, Tom wrote: > I use xmms, xmms-flac, and xmms-shell with some custom scripts. I do > all my interacting with xmms via the command line. (I've never > understood why every SOUND PLAYER in the world had to get mixed up with > showing flashy colors to the

Re: Exim question: open relay?

On Sun, Nov 09, 2003 at 05:20:09PM +0100, Arnt Karlsen wrote: > On Sat, 8 Nov 2003 23:44:48 -0500, > Jeff Elkins <[EMAIL PROTECTED]> wrote in message > <[EMAIL PROTECTED]>: > > > I have just started hosting a domain on my server for my granddaughter > > and the web portion is working perfectly.

Re: if left idle i get logged out

On Sun, Nov 09, 2003 at 04:51:42PM +, Brett Hennig wrote: > hi, > warning: vague question from someone who doesn't > really know what they're doing :-/ > > i've just gathered the courage to upgrade to woody and > all has gone well, except that if i leave my machine > idle for about 20 minutes

Re: Motherboard ASUS a7v600: is anybody using this?

Could I ask about the complete specs and costs of what you put together? I have been eye'ing the Asus A7V600 also. These are the parts I was looking at.. Off www.newegg.com $130SAPPHIRE ATI RADEON 9600 256MB 8X AGP But sarge has xfree 4.2 and 4.3 is needed for readeon $210

Re: user reboot/shutdown (was Re: GUI login screen and non-root shutdown...)

On Fri, 7 Nov 2003, Jonathan Dowland wrote: > On Tue, Nov 04, 2003 at 03:22:21PM +0100, S. Hakim Hamdani wrote: > > > That would be appreciated, also from my side. I found it a bit strange > > yesterday, when I reinstalled debian on a laptop, that I couldn?t login as > > root graphically, and also

RE: apache-ssl or libapache-mod-ssl ?

> I thought I might want to install webmin to administer the server, but > since webmin is web based, I realised I should perhaps have SSL installed > for Apache. Hello Lynn: Webmin runs its won SSL enabled connection (with its own signed certificate) once you install it, so there is no need fo

Re: Source list help

> From: Wayne Topa <[EMAIL PROTECTED]> > > I've been following the thread with interest. While not the nearest > > repository, I appended the above lines to my /etc/apt/sources.list and > > as root ran: # aptitutde update. I get the errors: > > Network error?? Server down? > > I use more then one

Re: Installing modem.

On Sun, 09 Nov 2003, Hoyt Bailey wrote: > I recieved my USR5610B and replaced the Intel winmodem. Turned on the > computer and it dialed the ISP in Windows. So I said hey this is going to > be easy. Went to U.S. Robitics website and no debian driver only RH, > Mandrake, & SUSE. > > [ ... snip d

Re: Source list help

> From: John Peter <[EMAIL PROTECTED]> > >>>deb http://http.us.debian.org/debian unstable main contrib non-free > >>> > >>> > ^^^ > > >>>deb-src http://http.us.debian.org/debian unstable main contrib non-free > >>> >

Re: got my woody working, wanted to upgrade, already ruined my system

On Sat, Nov 08, 2003 at 10:13:20AM -0700, David Millet wrote: > they said that the stable debian might be a little outdated and i didnt > listen. but they were right! it installed well, it was stable, but it > was outdated. and me, being the kind of guy that will spend the extra > $10,000 fo

Re: apache-ssl or libapache-mod-ssl ?

On Sun, 2003-11-09 at 12:22, Lynn W. wrote: > Hello I've configured Debian 3.0 Woody 2.2 kernel with (regular) > Apache, PHP4, and MySQL, as well as ColdFusion MX for Linux. I thought > I might want to install webmin to administer the server, but since > webmin is web based, I realised I should per

if left idle i get logged out

hi, warning: vague question from someone who doesn't really know what they're doing :-/ i've just gathered the courage to upgrade to woody and all has gone well, except that if i leave my machine idle for about 20 minutes it logs me out and kills all my processes. (i did have some trouble setting

Re: identifying failed processes

On Sun, 9 Nov 2003 13:22:06 +0100, Richard Lyons <[EMAIL PROTECTED]> wrote in message <[EMAIL PROTECTED]>: > Once in a while, something causes Xwindows to freeze. My > simple-minded response is to ctl-alt-F2, ps -e, then guess which > process might have done it and kill pid, ps -e again to see

STOP-PAYING For Your PAY-PER-VIEW, Movie Channels, Mature Channels...inigo

Cable TV Subscribers Get Our Cable TV Filter and Stop-Paying For Your Pay-Per-View, Mature Channels, Movie Channels, Sporting Events... Find Out More - http://www.XhenTronic.net?refid=1001858361131 Don't worry, it's perfectly-legal. Check out our legal page - http://cable.xhentronic.com

apache-ssl or libapache-mod-ssl ?

Hello I've configured Debian 3.0 Woody 2.2 kernel with (regular) Apache, PHP4, and MySQL, as well as ColdFusion MX for Linux. I thought I might want to install webmin to administer the server, but since webmin is web based, I realised I should perhaps have SSL installed for Apache. My question is,

Re: Exim question: open relay?

On Sat, 8 Nov 2003 23:44:48 -0500, Jeff Elkins <[EMAIL PROTECTED]> wrote in message <[EMAIL PROTECTED]>: > I have just started hosting a domain on my server for my granddaughter > and the web portion is working perfectly. However, I'd like to offer > her email as well. > > She's 200 miles away.

Re: X-skins?

On Sun, 9 Nov 2003 15:23:16 +0800, "David Palmer." <[EMAIL PROTECTED]> wrote in message <[EMAIL PROTECTED]>: > On Sun, 09 Nov 2003 13:32:08 +0800 > tshuyang <[EMAIL PROTECTED]> wrote: > > > Francisco Castellon wrote: > > > > > Hello list: > > > > > > I was wondering where I can get skins for w

Re: APRS under Linux

On Sun, 9 Nov 2003 02:15:20 -0700, [EMAIL PROTECTED] (Dana J. Laude) wrote in message <[EMAIL PROTECTED]>: > On Sat, Nov 08, 2003 at 06:43:08PM -0700 or thereabouts, Dana J. Laude > wrote: > > Greetings, > > > > Anyone have any pointers on setting up APRS under debian? > > I'd like to have some

Re: handling "broken packages"

On Sun, 9 Nov 2003 04:25:11 +, Colin Watson <[EMAIL PROTECTED]> wrote in message <[EMAIL PROTECTED]>: > On Sun, Nov 09, 2003 at 03:15:57AM +, Karsten M. Self wrote: > > What release? KDE3 is horribly broken under testing, and only > > somewhat less so under unstable. > > As I understan

Re: kde in "testing" ?

On Sunday 09 November 2003 16:32, stan wrote: > I have several "testing" machines, when I try to do apt-get dist-upgrade on > them, they want to remove kde-base. > > This seems like a bad idea :-) Not really as long as kdebase is the only package to be removed. It's just a metapackage for easier

Gaim needs kernel-headers ?

Hello all I would like to understand why, if someone has the time to explain it ... I have Sarge and 2.4.22 kernel ( installed and configured by me from sources). I allready had installed gaim_0.72-1 wich was compiled from sources and a .deb produced with Checkinstall . No kernel headers where n

kde in "testing" ?

I have several "testing" machines, when I try to do apt-get dist-upgrade on them, they want to remove kde-base. This seems like a bad idea :-) What can I do (besides not upgrading them) to work around this? This has been going on for over a week now. -- "They that would give up essential libert

Re: Installing modem.

On 9 Nov 2003 at 7:24, Hoyt Bailey wrote: > I recieved my USR5610B and replaced the Intel winmodem. Turned on the > computer and it dialed the ISP in Windows. So I said hey this is going to > be easy. Went to U.S. Robitics website and no debian driver only RH, > Mandrake, & SUSE. Ok I can do r

Re: Source list help

Haines Brown([EMAIL PROTECTED]) is reported to have said: > > Shaul Karl wrote: > > > > >On Sat, Nov 08, 2003 at 12:03:38PM -0700, [EMAIL PROTECTED] wrote: > > >> > > >>I was wondering where to get source to add to mu source.list in ordre to > > >>get packages from unstable. > > > > > >deb http://

Re: Source list help

Haines Brown wrote: Shaul Karl wrote: On Sat, Nov 08, 2003 at 12:03:38PM -0700, [EMAIL PROTECTED] wrote: I was wondering where to get source to add to mu source.list in ordre to get packages from unstable. deb http://http.us.debian.org/debian unstable main contrib non-free

Re: Installing modem.

Hoyt Bailey wrote: I recieved my USR5610B and replaced the Intel winmodem. Turned on the computer and it dialed the ISP in Windows. So I said hey this is going to be easy. Went to U.S. Robitics website and no debian driver only RH, Mandrake, & SUSE. Ok I can do rpm. downloaded rpm driver put i

Re: problems with 'root' floppy

Jon Medding wrote: I have an old Pentium 75 mhz laptop from MidWest Micro and I am trying to load the latest stable version of Debian (V3.0r1). There is no CD on the laptop, just a floppy and a PCMCIA Ethernet card (newly installed), so I want to start with the floppies and then download the rest o

Re: Exim question: open relay?

Also, check out these sites that will test for an open relay: http://ordb.org/submit/ http://www.abuse.net/relay.html from your mailserver: telnet relay-test.mail-abuse.org = = Management is doing things right;

Re: RAID Failure

hi ya rus On Sun, 9 Nov 2003, Florian Reitmeir wrote: > On Son, 09 Nov 2003, Rus Foster wrote: > > > > pull out hdc ... you have a definite dead drive > > > adn see if the system still works with your hda drive > > > sicne its supposed to be mirrored > > The reason I want to fail the disk is th

Re: Motherboard ASUS a7v600: is anybody using this?

Hi I'm using this mobo with linux just fine. the network chipset works with the syskonnect driver...depending on the kernel version you may have to update it with the patch from http://www.syskonnect.com/syskonnect/support/driver/htm/sk98lin.htm to support the card though... with the sata drivers

disappearing emails

Hello! I have a strange problem with my emails. I am using mozilla (I don't know if this problem is related to mozilla), and after downloading my mails form my pop3 server, some mails has incomplete headers, or the whole body of the message missing. When the header is incomplete, it is like th

Re: RAID Failure

Hi, > mdadm --set-faulty --set-faulty Thanks. Thats helped for now Rgds Rus -- w: http://www.jvds.com | Just Virtual Dedicated Servers e: [EMAIL PROTECTED]| banners: http://www.jvds.com/banners.php t: +44 7919 373537 | t: 1-888-327-6330 | email: [EMAIL PROTECTED]

Installing modem.

I recieved my USR5610B and replaced the Intel winmodem. Turned on the computer and it dialed the ISP in Windows. So I said hey this is going to be easy. Went to U.S. Robitics website and no debian driver only RH, Mandrake, & SUSE. Ok I can do rpm. downloaded rpm driver put it on a CD and boote

Re: RAID Failure

On Son, 09 Nov 2003, Rus Foster wrote: > > pull out hdc ... you have a definite dead drive > > adn see if the system still works with your hda drive > > sicne its supposed to be mirrored > The reason I want to fail the disk is that the machine is 3000 miles away > and I can't get anyone on site AT

Re: RAID Failure

Hi, > why ??? > > pull out hdc ... you have a definite dead drive > adn see if the system still works with your hda drive > sicne its supposed to be mirrored The reason I want to fail the disk is that the machine is 3000 miles away and I can't get anyone on site ATM Rgds Rus -- w: http://www.jv

problems with 'root' floppy

I have an old Pentium 75 mhz laptop from MidWest Micro and I am trying to load the latest stable version of Debian (V3.0r1). There is no CD on the laptop, just a floppy and a PCMCIA Ethernet card (newly installed), so I want to start with the floppies and then download the rest over the net. The

Re: RAID Failure

hi ya rus On Sun, 9 Nov 2003, Rus Foster wrote: > Hi, > Can peeps tell me why the following is happening. > > /etc/raittab > > raiddev /dev/md0 > raid-level 1 > nr-raid-disks 2 > chunk-size 64k > persistent-superblock 1 > nr-s

identifying failed processes

Once in a while, something causes Xwindows to freeze. My simple-minded response is to ctl-alt-F2, ps -e, then guess which process might have done it and kill pid, ps -e again to see if it died, kill -9 if not, then alt-F7 to see if the problem is cured. Then do it all again until problem solve

leafnode importing mailing lists

Hello. If someone is interested in patch that allows leafnode to act as bidirectoral mailing lists <-> newsgroups gateway, please take a look at http://zigzag.lvk.cs.msu.su/leafnode/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTE

Re: Retry: F-Prot and Amavis, exim

Hi Mark, --On Sunday, November 9, 2003 10:52 +0100 Mark Maas <[EMAIL PROTECTED]> wrote: I have the following system running smoothly for some tim enow: Exim3, Amavis, spamassassin and Clamav-antivirus. I just wanted to add F-prot to the list, so Installed it and uncommented the appropriate lines

X-server errors

Over the years, using various RH and SuSE versions, and again recently under Debian, I've noticed the list of errors generated by the X-server. Usually, the screen is full of them when dropping back to command line. I've come to accept them as normal. But are they? Should I care? It would b

  1   2   >