There was very long times ago Matthias Kirschner wrote:
Hi IoGuiX
for me X works except opengl. I have uploaded all things i think you
need. Install the kernel-image, copy XFree86 to /usr/X11R6/bin and make
a link from /etc/X11/X to XFree86. A also have uploaded the
mol-modules.deb and X config.
On dt, 2003-12-09 at 10:07, Colin Leroy wrote:
> BenH is working on it, AFAIK.
Ok :-)
> Did you try to plug an external monitor ? Does it work for you ?
Yes, it works with another XF86Config-4 (in mode xinerama):
http://www.elsud.org/~oriol/XF86Config-4-dual
Bye,
PD: This configuration is a
On dt, 2003-12-09 at 12:31, IoGuiX ''JGuillaume de Rorthais" wrote:
> Hello,
>
> Ok, actually, I'm trying your solution...But, I see something strange in
> your kernel config :
> Why do you select "Module" for "AGP Support" & "ATI Radeon"? And why
> don't you select "Apple UniNorth AGP support"?
> The only things that don't work are cpufreq and sleep. Somebody knows
> something about it?
BenH is working on it, AFAIK.
Did you try to plug an external monitor ? Does it work for you ?
--
Colin
Ne disez pas disez, mais disez dites
Hello,
I have an iBook G4 933Mhz with Debian Sid and XFree works for me
(included 3D acceleration :-). I've installed xlibmesa-gl1-dri-trunk and
xserver-xfree86-dri-trunk. My /etc/apt/sources.list:
###
deb http://http.us.debian.org/debian unstable main contrib non-free
deb http://non-us.d
Hello,
Mmmmh...yes, sorry, I tested lots of things, but my xserver still
failed... :(
Certainly I didn't make something(s), but I really tested and follow
lots of instructions...
Before explain some of my actions, here my situation now:
when I launch "XFree86 -xf86config XF86Config-4.radeon",
On Wed, 2003-12-03 at 11:54, [EMAIL PROTECTED] wrote:
>
> Please, just tell me how to make work the XFree86-dri-trunk
Basically, all you should need is
/usr/share/doc/xserver-xfree86-dri-trunk/examples/XF86Config-4.radeon
plus an appropriate ChipID, e.g. 0x5968 or 0x4c66 .
--
Earthling Michel
Hello,
After spend some hours to sleep (ouf!), I just told me: "pfff...installe les
librairies gros beta :-/"...which mean in french that I was not very clean
before sleeping :D ...
SO, now, I success to compil XFree from CVSI will go hahead in my
conifguration this evening...I need to go wor
To: "Michel �" <[EMAIL PROTECTED]>
> Cc: "Peer Klein" <[EMAIL PROTECTED]>;
> Sent: Monday, December 01, 2003 6:41 PM
> Subject: Re: iBook G4 800MHz configuration
>
>
> Hello,
>
> Did you received this last mail (see bottom)?
>
> I tried
Hello,
Thank you for your quick answer ;)
Here some files that can be helpful (see attachment)...
Please, note that I use the fbdev 4.2.1.1 with XFree86-dri-trunk
4.3.9.12...So maybe my problem is normal...
I still try to make it work...Thank for your help :)
PS: If you need more information
thais"" <[EMAIL PROTECTED]>
To: "Michel �" <[EMAIL PROTECTED]>
Cc: "Peer Klein" <[EMAIL PROTECTED]>;
Sent: Monday, December 01, 2003 6:41 PM
Subject: Re: iBook G4 800MHz configuration
Hello,
Did you received this last mail (see bottom)?
I tried some o
Hello,
Did you received this last mail (see bottom)?
I tried some other things...
First I add "true" in the Option "UseFBDev" line that I forgot.
Then I tried with fbdev module from xserver-xfree86 sid package (a 4.2 I
think)...I saw a stable X screen dring 1 second...before X shut with
error
On Fri, 2003-11-28 at 19:34, Colin Leroy wrote:
> > Ok, sounds a bit low, looks like it's running at low speed,
> > I still have to figure out how to get the speed step working
> > on these machines.
>
>
> The displayed freq (999MHz) doesn't necessary mean that it's running at
> 999MHz?
No. Well
Hi thread,
I'm sorry for my multiple postings... The first posting appeared in the ng
about 28 hours or so after I sent it. So I tried again and again.
Now I'm a patient boy.
I wait, I wait, I wait, I wait.
My time's like water down a drain.
--
Peer
El vie, 28-11-2003 a las 13:47, Colin Leroy escribió:
> Hi,
>
> >What chip ID did you try? I'd try 0x4c66 (for a Mobility Radeon 9000).
> >Also make sure that radeonfb is running in console, and that you're
> >using Option "UseFBDev".
>
> What is radeonfb?
The kernel driver that gives you the in
Hi,
>What chip ID did you try? I'd try 0x4c66 (for a Mobility Radeon 9000).
>Also make sure that radeonfb is running in console, and that you're
>using Option "UseFBDev".
What is radeonfb?
--
Colin
Ne disez pas disez, mais disez dites
On Fri, 2003-11-28 at 07:24, [EMAIL PROTECTED] wrote:
>
> OK, I installed your package (the dri-trunk-sid's packages), so I use XFree86
> 4.3.99.12 (ouaaa!).
> I loaded the module radeon compiled from the drm-module-source for my
> 2.6.0-test11 kernel.
> I edited my /etc/X11/XFree86Config-4 and ad
> Ok, sounds a bit low, looks like it's running at low speed,
> I still have to figure out how to get the speed step working
> on these machines.
The displayed freq (999MHz) doesn't necessary mean that it's running at
999MHz?
My ibook G4 says 933MHz, ~700 bogomips too. Do I have to enable cpufreq
Hello Michel Dänzer,
OK, I installed your package (the dri-trunk-sid's packages), so I use XFree86
4.3.99.12 (ouaaa!).
I loaded the module radeon compiled from the drm-module-source for my
2.6.0-test11 kernel.
I edited my /etc/X11/XFree86Config-4 and add in section "Device": driver
"radeon"...But
On Thu, 2003-11-27 at 00:29, Justin Lott wrote:
> Ben,
>
> I dont know if this would help you at all but I have this info
> available for my Powerbook G4/1Ghz. It is reporting bogomips of 747.11
>
> Info is available here and here:
> http://www.pixelchaos.net/files/powerbook/cpuinfo.txt
> http:/
Michel Dänzer wrote:
> http://dri.sourceforge.net/snapshots/README.Debian
> lists an alternative location now.
Hi Michel,
I tried your packages and the drm-trunk. When I now install them, dpkg
tells me about "depmod Unresolved references" in the drm-trunk
drivers. And the built drm-trunk de
Michel Dänzer wrote:
> http://dri.sourceforge.net/snapshots/README.Debian
> lists an alternative location now.
Hi Michel,
I tried your debs and the drm-trunk. When I install the modules with dpkg -i
I get:
depmod: *** Unresolved symbols in /lib/modules/2.4.23[...]/char/drm/mga.o
depmod: *** Unr
Hello,
I will try your dri-trunk deb package in few hours, but maybe you know or you
have a good howto about the installation? Or maybe the doc on dri.sourceforge is
the best one...I have to read it...
Thank you for your work ;)
--
IoGuiX
Selon Peer Klein <[EMAIL PROTECTED]>:
> Michel Dänzer
On Wed, 2003-11-26 at 21:55, Peer Klein wrote:
> Michel Dänzer wrote:
>
> > http://dri.sourceforge.net/snapshots/README.Debian
> >
> > lists an alternative location now.
>
> Hi Michel,
>
> I tried your debs and the drm-trunk. When I install the modules with dpkg -i
> I get:
>
> depmod: *** Unr
Michel Dänzer wrote:
> http://dri.sourceforge.net/snapshots/README.Debian
>
> lists an alternative location now.
Hi Michel,
I tried your debs and the drm-trunk. When I install the modules with dpkg -i
I get:
depmod: *** Unresolved symbols in /lib/modules/2.4.23[...]/char/drm/mga.o
depmod: ***
Kernel compiles, like the other benchmarks, are complex and a straight
forward comparison between difference platforms is not really fair. As
someone pointed out earlier, generating PowerPC code is a more complex
affair than generating x86 code (which I have to admit, I did not know
either).
On m
On Wed, 2003-11-26 at 02:58, Colin Leroy wrote:
> Maybe it's due to the fact gcc is not as optimized on ppc as it is on x86.Or,
> your ibook may not run at full speed ? I remember something like
Although my guess would be that it's a simple matter of disk speed - if
the x86 is a desktop, it will
El mar, 25-11-2003 a las 16:07, [EMAIL PROTECTED] escribió:
> If someone can help me...
Sorry, I have the same problem.
>
> PS: where is the '~' key???
On my Spanish keyboard it's Alt+Fn+4 (like on standard 105 keyb., but
adding Fn key).
--
Un abrazo, Juande
signature.asc
Description: Esta
Hello,
Thank you for your help...;)
What are your Bogomips and what CPU model is this ?
Here, my /proc/cpuinfo :
--
processor : 0
cpu : 7455, altivec supported
clock : 799MHz
revision: 3.3 (pvr 8001 0303)
bogomips
Ben,
I dont know if this would help you at all but I have this info
available for my Powerbook G4/1Ghz. It is reporting bogomips of 747.11
Info is available here and here:
http://www.pixelchaos.net/files/powerbook/cpuinfo.txt
http://www.pixelchaos.net/files/powerbook/proc-device-tree.tar.gz
-
> Thanks for your quick answer!! I currently run the first line ;)...
>
> Another thing (I'm very new under ppc arch), is it normal that the kernel
> compilation takes more that 20minutes to finish?? With a basic configuration,
> it
> took 10mins on a i386 arch with a 850Mhz...If someone can sho
On Tue, 25 Nov 2003 [EMAIL PROTECTED] wrote:
>
> Another thing (I'm very new under ppc arch), is it normal that the kernel
> compilation takes more that 20minutes to finish?? With a basic configuration,
> it
> took 10mins on a i386 arch with a 850Mhz...If someone can shortly learn me
> some
> th
On Nov 25, 2003, at 10:55 AM, [EMAIL PROTECTED] wrote:
Another thing (I'm very new under ppc arch), is it normal that the
kernel
compilation takes more that 20minutes to finish?? With a basic
configuration, it
took 10mins on a i386 arch with a 850Mhz...If someone can shortly
learn me some
On Tue, 2003-11-25 at 18:01, [EMAIL PROTECTED] wrote:
>
> Quoting Michel Dänzer <[EMAIL PROTECTED]>:
> > Err... no. :) You can both use my dri-trunk-sid or dri-mach64-sid
> > packages.
>
> Okay, I will (re)-try (moreover, CVS don't compil...) with your
> packages...but I
> can't find them...The
Hello,
Quoting Michel Dänzer <[EMAIL PROTECTED]>:
> Err... no. :) You can both use my dri-trunk-sid or dri-mach64-sid
> packages.
Okay, I will (re)-try (moreover, CVS don't compil...) with your packages...but I
can't find them...The packages I have are from a japan mirror (!)...
whereis your rep
OoO En cette aube naissante du mardi 25 novembre 2003, vers 07:55,
[EMAIL PROTECTED] disait:
> Another thing (I'm very new under ppc arch), is it normal that the kernel
> compilation takes more that 20minutes to finish?? With a basic configuration,
> it
> took 10mins on a i386 arch with a 850Mhz.
Quoting Matthias Kirschner <[EMAIL PROTECTED]>:
> Hello IoGuiX
Hello Matze,
> * [EMAIL PROTECTED] <[EMAIL PROTECTED]> [2003-11-25 16:07:00 +0100]:
>
> > If someone can help me...
> http://www.difficulties.de/ibook/
Mmmh...your link is down... :(
Cheers ;)
> Another thing (I'm very new under ppc arch), is it normal that the
kernel
> compilation takes more that 20minutes to finish?? With a basic
configuration, it
> took 10mins on a i386 arch with a 850Mhz...If someone can shortly learn
me some
> things about the ppc processor, it could be very nice :)
Hello IoGuiX
* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [2003-11-25 16:07:00 +0100]:
> If someone can help me...
http://www.difficulties.de/ibook/
> Should I install the CVS version of XFree86??
yes, you should. And you need the kernel-patch.
> PS: where is the '~' key???
you have to edit your k
> Yes [...]
Err... no. :) You can both use my dri-trunk-sid or dri-mach64-sid
packages.
Oh, sorry then :)
--
Colin
Ne disez pas disez, mais disez dites
On Tue, 2003-11-25 at 16:26, Colin Leroy wrote:
> > Should I install the CVS version of XFree86??
>
> Yes [...]
Err... no. :) You can both use my dri-trunk-sid or dri-mach64-sid
packages.
--
Earthling Michel Dänzer | Debian (powerpc), X and DRI developer
Software libre enthusiast|
re-hello ;)
> > Should I install the CVS version of XFree86??
>
> Yes
>
> $ cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/dri co xc
> $ cd xc/xc
> $ make World
> $ su -c "make install"
> $ cd programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/
> $ make -f Makefile.linux clean all radeon.
> Should I install the CVS version of XFree86??
Yes
$ cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/dri co xc
$ cd xc/xc
$ make World
$ su -c "make install"
$ cd programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/
$ make -f Makefile.linux clean all radeon.o
$ su -c "mkdir /lib/modules/`una
Hello,
Did someone success to configure the xserver on an iBook G4 800MHz? It's graphic
card is an ATI Radeon Mobility 9200. I tried with XFree86 4.2 (sid) and XFree86
4.3 DRI trunk without results...
The error is "(EE) No devices detected"...I read in the logfile ATI Radeon 9200
and ATI Radeon
44 matches
Mail list logo
