Eric Deveaud a écrit :
Hi,
I have a biG5 lying on my desktop, could someone point me to a iso
image that will allow me to install debian on this machine
You can try with this one and use debootstrap.
ftp://ftp.crihan.fr/mirrors/knoppix-mib.org/k-mib-ppc-beta-pre7.iso
Regards,
--
F
,
--
Fleny68
Patrick Finnegan a écrit :
So, as I've noticed that I can't successfully compile a 64bit powerpc
kernel using any sort of 'normal' kernels (or it may be a GCC issue).
Precisely what toolchain/kernel sources (ie give me URL's or debian
package names) do I need to build a ppc64 kernel?
Thanks,
e iso).
there is a generic ppc 2.6.3-ben2 in the same iso too. works in my G4
windtunnel.
Regards,
--
Fleny68
Hello,
I have a problem with 2.6.3-ben2. mkisofs makes non ppc-bootable iso,
where the same command makes bootable iso with 2.4-ben
I suspect an hfs problem, as bootable iso uses hybrid hfs. Maybe
blessing the boot directory?
Has anyone meet problems with HFS in 2.6.3-ben2 ?
Regards,
--
F
Colin Leroy a écrit :
PowerBook G4 Alu 15" (or '?! ;-)
$ uname -a
Feb 25 18:39:19 oz pmud[9477]: No sleep support on this hardware,
exiting!
If someone knows what happens ;-)
Well, sleep isn't supported by the kernel on this machine :-) (due to the
video chip)
Apple's sleep is not ope
Hello,
I meet a bug in 2.6.1-rc1-ben1, with hfs:
#mount -t hfs /dev/loop0 hfsmount
mount: /dev/loop0: can't read superblock
but:
# hmount /dev/loop0
Volume name is "K9"
Volume was created on Tue Jan 6 09:40:13 2004
Volume was last modified on Tue Jan 6 09:41:07 2004
Volume has 9612800 bytes f
Joerg Sommer a écrit :
Hi,
unfortunately it is common practice to place a vfat on usb stricks. Hence
you need a PC-fdisk on mac. But where is it? The fdisk on pcs is in
util-linux, but this package for ppc only have a cfdisk and an sfdisk.
Isn't a fdisk for ppc available?
Joerg.
You can use p
tion
Is Option "UseFBDev" "true" needed for *all* the radeons cards?
And what drivers needs BusID set?
Regards,
--
Fleny68
Le Lundi 1 Décembre 2003 10:45, xavier grave a écrit :
> Le 28.11.2003 21:06:38, fleny68 a écrit :
> > This one should do that. parted with hfs and debootstrap are
> > installed.
> > ftp://ftp.crihan.fr/mirrors/knoppix-mib.org/k-mib-ppc-beta-pre5.iso.gz
>
> Thanks for th
oject:
https://alioth.debian.org/projects/debix/
> I can try both 32 and 64 bits benh kernels with ppc32 debian packages
> but do the ppc64 debian packages will work with a 32 bits or 64 bits
> kernel ?
You're welcome in the list above. It's a kind of knoppix project with ppc
port.
Regards
--
Fleny68
IL PROTECTED]: is in
yaboot.conf, made under 2.4.
With 22.4.23-pre7-ben0:
~# ofpath /dev/hda
/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]:
--
Fleny68
--------
Regards
--
Fleny68
ter
at boot. No? I tested with video=rivafb,flatpanel rivafb=flatpanel etc...
I cannot find something that makes it work.
Regards,
--
Fleny68
2.4 works fine.
There is an option to put at boot to force flatpanel use? rivafb=flatpanel
does not work.
Regards
--
Fleny68
were missing (look in the archives).
Are you sure, with messages at the begining of the boot, your hd is detected
and is partition table is read?
--
Fleny68
ECTED]/ATY,[EMAIL
PROTECTED]
That means it's using offb is'nt it? It needs options at boot to use the dvi
connector?
--
Fleny68
t recognize it as a bootable CD…
___
K-mib-ppc mailing list
[EMAIL PROTECTED]
http://mail.nongnu.org/mailman/listinfo/k-mib-ppc
-------
--
Fleny68
LOL
# ybin
ofpath: WARNING: Your kernel is too old for proper support, device may be
innaccurate.
# uname -r
2.6.0-test9-mib15
:-D
--
Fleny68
revision of E-IDE driver: 7.00alpha2 in 2.6.0-test9 and
7.00beta4-2.4 in 2.4.23. Not ?
--
Fleny68
Windtunnel pmac).
and the kernel does not find the hard disk;tThe messages are:
ide0: Found Apple Keylargo ATA-4 controller, bus ID 2.
Probing IDE interface ide0.
ide0: Bus empty, interface released.
Any idea?
--
Fleny68
is loop-aes and cryptoloop enabled.
This is a Knoppix-like LiveCD, maybe that could help you?
http://www.nongnu.org/k-mib/
look for knoppix-MiB-PPC-alpha-2e.is in the mirrors.
Regards,
--
Fleny68
nd not for
the deb. Is there a special patch in debian?
Did you try with the recent rc4? I guess it could become 1.1, the zipped file
for macosX does not mention any rc in it's name.
Thank you kevin, for your port. it work's fine.
--
Fleny68
tcl8.4
# define XF86SetupUsesStaticTcl NO
/* un-comment this when it is un-broken */
/* # define JoystickSupport YES */
Regards,
--
Fleny68
ejectable, freeze
the machine, and errors at boot).
Gcombust works fine, so i think is not hardware problem.
Someone has the same kind of problems?
--
Fleny68
t; I suspect your Powerbook 12" is OldWorld, NuBus, or even 68k. What is
> the model number?
No. it's a powerbook g4 12" from this year, with MacOSX 10.2.3.
--
Fleny68
Le Mardi 29 Juillet 2003 16:26, Rogério Brito a écrit :
> On Jul 29 2003, fleny68 wrote:
> > to make my knoppix MiB ppc bootable.
>
> Talking about Knoppix, I would like to try it (especially the x86
> version, to see how it works and to show it to some friends), but it
>
, ibook, powerbook
17...) but strangely not on this one.
thanks for your answer,
--
Fleny68
hanks,
--
Fleny68
rk?
(Is that on the Knoppix-MiB-ppc ?)
Regards,
--
Fleny68
x-mib/doc-html/Knoppix-Mib.html
(with XF4.3, OOo1.0.3, Kde3.1.1, mol...)
but it not works on all Mac models.
Regards
--
Fleny68
31 matches
Mail list logo
