Hi people,
i hope you can help me. I tried to get the Airport card in my iBook
running but no luck. I googled a lot and finally I'm sure it is the
firmware of my card that dosn't support the WEP encryption.
Current Firmware is Lucent/Agere 4.16
From what I've seen I think I need at least a vers
On 3/14/06, Terry Shannon <[EMAIL PROTECTED]> wrote:
> Quick question for those who don't have time to read the whole saga
> below: aptitude shows all packages selected for deletion (don't know
> how I got it into that state.) How do I unselect all the packages
> for deletion?
press:
^:
or
^=
On Tue, Mar 14, 2006 at 09:00:23AM -0800, Jason Self wrote:
> I am looking to add quota support.
[...]
> Is quota support already enabled in the kernel for 3.1r1? How can I tell?
$ grep -i quota /boot/config*
I haven't tried quota, but I noticed that in the kernel docs for
quota, it says that q
Ctl-u didn't work so I must have tried it too late. I don't think I
tried to apply '+' at a high level. Perhaps this is how I got in the
pickle to begin with; I have a high level selected and while moving
through the menus I must have accidently selected remove!
I think this is a bad flaw
On Tue, Mar 14, 2006 at 09:44:38PM +0100, Filippo Giunchedi wrote :
> Package: linux-image-2.6.16-rc5-powerpc
> Version: 2.6.15+2.6.16-rc5-0experimental.1
> Severity: normal
>
> Hi,
> I was trying 2.6.16-rc5 and I got this error while trying to modprobe
> snd-powermac on powerbook6,2
Hi,
I am wo
hi
I've installed Debian GNU/Linux on my Powermac 8200,
and currently woody w/2.4 kernels works quite well.
When I try to upgrade to 2.6 kernel, the system does
not boot and I have to use the boot/root floppy disks
to bootstrap the system.
So after adding sarge or etch to sources.list:
$
Sven Luther wrote:
On Tue, Mar 14, 2006 at 06:53:21PM +0100, Alexander Baldeck wrote:
Sven Luther wrote:
On Tue, Mar 14, 2006 at 09:30:29AM -0800, Jason Self wrote:
Perhaps it's the monitor? Have you tried using it with another
machine?
On 3/14/06, Maes, Roel <[EMAIL PROTECTED]
After doing some Googling, I did find an old message on this list about
ALSA errors tring to load the PMacToonie.conf.
http://lists.debian.org/debian-powerpc/2006/01/msg00232.html
After adding in the missing line, I now have a PCM volume slider ;)
-Andy
On Wed, 2006-03-15 at 09:34 +1100, Andy B
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 05.03.2006 um 23:39 schrieb Sven Luther:
i really do give it the full path, and don't forget to include the
initrd too.
I got the kernel-sorce from unstable now, build it, installed and got
endless errors at boot time.
It was no possible to
I patched my 2.6.16-rc5 kernel, and I have sound! I don't have any
sliders for volume contol though, but software volume control works
fine.
Now I can ditch that USB sound dongle I've been carrying around. Thanks!
-Andy
On Tue, 2006-03-14 at 11:50 +0100, Gaudenz Steinlin wrote:
> Hi
>
> I adopt
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 05.03.2006 um 23:54 schrieb david:
I used a 2.6.15.3 from http://www.ppckernel.org/
A binary? Else can you give the direct link?
That one is not there and I really do not want to install binary
kernels not build for Debian.
greetings
J
On Tue, 14 Mar 2006 12:40:29 +0100, Gaudenz Steinlin wrote:
> I'm currently working on update the mol package in Debian. I could need
> some comaintainers though, because Otavio who originally started the
> pkg-mol effort no longer owns any Powerpc machine.
I'd be glad to help. Just tell me if th
Package: linux-image-2.6.16-rc5-powerpc
Version: 2.6.15+2.6.16-rc5-0experimental.1
Severity: normal
Hi,
I was trying 2.6.16-rc5 and I got this error while trying to modprobe
snd-powermac on powerbook6,2
Unable to handle kernel paging request for data at address 0x0002
Faulting instruction add
On Tue, 14 Mar 2006 16:10:21 +0100, Cédric Boutillier wrote:
> My naive question : Is this error related to the fact that write access to
> journalized hfs+ has been deactivated in 2.6.15 ?
I am running it with a homemade 2.6.15, so I don't think that's the
problem. I had a similar problem with t
On Tue, Mar 14, 2006 at 06:53:21PM +0100, Alexander Baldeck wrote:
> Sven Luther wrote:
> >On Tue, Mar 14, 2006 at 09:30:29AM -0800, Jason Self wrote:
> >
> >>Perhaps it's the monitor? Have you tried using it with another machine?
> >>
> >>On 3/14/06, Maes, Roel <[EMAIL PROTECTED]> wrote:
> >>
Sven Luther wrote:
On Tue, Mar 14, 2006 at 09:30:29AM -0800, Jason Self wrote:
Perhaps it's the monitor? Have you tried using it with another machine?
On 3/14/06, Maes, Roel <[EMAIL PROTECTED]> wrote:
Dear sir,
My company just bought a second hand IBM RS/6000 F50 server.
When i try to
On Tue, Mar 14, 2006 at 09:30:29AM -0800, Jason Self wrote:
> Perhaps it's the monitor? Have you tried using it with another machine?
>
> On 3/14/06, Maes, Roel <[EMAIL PROTECTED]> wrote:
> >
> > Dear sir,
> >
> > My company just bought a second hand IBM RS/6000 F50 server.
> > When i try to boot
Perhaps it's the monitor? Have you tried using it with another machine?
On 3/14/06, Maes, Roel <[EMAIL PROTECTED]> wrote:
>
> Dear sir,
>
> My company just bought a second hand IBM RS/6000 F50 server.
> When i try to boot it, onfortunately, the screen remains blank.
> I removed the VGA card, en in
Dear
sir,
My company just
bought a second hand IBM RS/6000 F50 server.
When i try to boot
it, onfortunately, the screen remains blank.
I removed the VGA
card, en installed an other one, but still, blank screen.
(no input signal
detected)
Can you help me out
on this one ?
You would be
I am looking to add quota support.
This isn't my first time using Linux, but it is my first serious
attempt, and my first time with Debian.
I love Debian's package management stuff. It makes installing and
managing software so easy, but I digress... I am looking to replace
all of our servers with
On (14/03/06 07:09), Terry Shannon wrote:
> Quick question for those who don't have time to read the whole saga
> below: aptitude shows all packages selected for deletion (don't know
> how I got it into that state.) How do I unselect all the packages
> for deletion?
Ctl-u before exiting
Hi, there
When booting, it always hangs here,
-8<-
Invalid card number
Usage: amixer command
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'defaul
Hi,
Just a quick question about mol : on my mid 2005 ibook, I can run
Tiger with mol 0.9.70 debian packages and a 2.6.14 kernel, using the
patchs from http://www-user.rhrk.uni-kl.de/~nissler/mol/.
But with a 2.6.15 kernel, I see the yellow screen with the penguin,
but I do not get to the wheel c
Johannes Berg wrote:
On Thu, 2006-03-09 at 14:35 +0100, Michel Dänzer wrote:
[snip...]
This is what I have now, and it seems to work:
Option "CRT2Position" "LeftOf"
Option "CRT2HSync" "10-160"
Option "CRT2VRefresh" "50-75"
maybe so
Op
Erik Chakravarty wrote:
If you want to upgrade to Xorg, change your apt-get sources
(/etc/apt/sources.list) from sarge to unstable
first: sarge to testing - and then to unstable - if it's
needed -
and run apt-get update &&
apt-get dist-upgrade.
[snip..]
regards,
Eugen P
On Thu, 2006-03-09 at 14:35 +0100, Michel Dänzer wrote:
> What did you set it to? If it was 2560x1024 or larger, I'm not sure
> what's up.
I did, but it still drove the external monitor with 1024x768 which
really sucked, I even got horizontal panning.
> Most likely a configuration issue then.
Y
Quick question for those who don't have time to read the whole saga
below: aptitude shows all packages selected for deletion (don't know
how I got it into that state.) How do I unselect all the packages
for deletion?
More details
I did a recent install of debian on my iMac 233. I'v
On Tue, Mar 14, 2006 at 11:10:14AM +0100, Gaudenz Steinlin wrote:
> Hi
>
> On Mon, Mar 13, 2006 at 09:58:22PM +0100, Jack Malmostoso wrote:
> > Hello there list,
> >
> > I just wanted to report that mol-0.9.71pre8 works beautifully and loads
> > Tiger just fine.
> > You can download the sources h
If you want to upgrade to Xorg, change your apt-get sources
(/etc/apt/sources.list) from sarge to unstable and run apt-get update &&
apt-get dist-upgrade.
Note this will upgrade all packages from the stable sarge release to the
newest versions which have not been as thoroughly tested. Make sure yo
Hi
I adopted the changes Ben Collins did in the Ubuntu kerenel
to the latest Powerpc git kernel (paulus's tree). This should make sound
working on the Powerbook 5,8. The patch will should apply to any recent
2.6.16-rc? kernel.
I attached the patch in case you are interested.
As I'm not sure i
Hi
On Mon, Mar 13, 2006 at 09:58:22PM +0100, Jack Malmostoso wrote:
> Hello there list,
>
> I just wanted to report that mol-0.9.71pre8 works beautifully and loads
> Tiger just fine.
> You can download the sources here:
>
> http://dev.gentoo.org/~josejx/mol-0.9.71_pre8.tar.bz2
I'm currently wor
On Tue, 2006-03-14 at 11:35 +0100, [EMAIL PROTECTED] wrote:
> On Tue, Mar 14, 2006 at 11:21:09AM +0100, Michel Dänzer wrote:
> > On Tue, 2006-03-14 at 10:49 +0200, Eddy Petri??or wrote:
> > >
> > > ALSA changes the pitch (about 110% of the normal speed),
> >
> > Could be an application bug.
>
>
On Tue, Mar 14, 2006 at 11:21:09AM +0100, Michel Dänzer wrote:
> On Tue, 2006-03-14 at 10:49 +0200, Eddy Petri??or wrote:
> >
> > ALSA changes the pitch (about 110% of the normal speed),
>
> Could be an application bug.
>
It might also be a different sampling rate of the sound server and the f
On Tue, 2006-03-14 at 10:49 +0200, Eddy Petrişor wrote:
>
> ALSA changes the pitch (about 110% of the normal speed),
Could be an application bug.
> and with the future removal of the OSS drivers from the 2.6 tree I feel
> that the sound on PPC issue will strike a lot of uses.
ALSA has been wo
On Fri, 2006-03-10 at 14:45 +0100, Johannes Berg wrote:
> On Thu, 2006-03-09 at 14:38 +0100, Johannes Berg wrote:
>
> > I don't remember. I'll try with 2560x1024 as soon as I'm home again.
>
> I had a more elaborate mail somewhere (which will get sent out on Monday
> or so I guess, stuck on my po
On 3/13/06, Niklaus Giger <[EMAIL PROTECTED]> wrote:
> Am Sonntag, 12. März 2006 21:50 schrieb Elimar Riesebieter:
> > On Sun, 12 Mar 2006 the mental interface of
> >
> > Does your machine supports fire-wire?
> Yes it does. And the Debian kernel package 2.6.15-1-powerpc does not show the
> Ooops. I
36 matches
Mail list logo
