On 08.05.2002 Javier Bertoli wrote:
On Mon, 5 Aug 2002, Leif Hanack wrote:
> Hello,
>
> what are your experience with debian and an hp-notebook and there
hareware?!
>
> little or much trouble getting debian to run?!
Hi,
I've an OB 4150 with Debian Testing. It installed and runs
smoothl
On Mon, 5 Aug 2002, Leif Hanack wrote:
> Hello,
>
> what are your experience with debian and an hp-notebook and there hareware?!
>
> little or much trouble getting debian to run?!
>
> thanks in advance, leif
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe".
On Mon, Aug 05, 2002 at 06:05:19PM +0300, Jarkko <[EMAIL PROTECTED]> wrote:
> Has any one ideas howto get 1024x768 resolution with 16-bit colors in HP
> omnibook 510? I know that there is some problems with i830MG graphic
> chip and dynamic video memory.
I've an XE3-GF, but it might work for you
Hello,
I have recently foind a old 77 mhz computer that has
19megs of ram and a 750 meg hard drivei wanted to
make this a storage space over a network for the other
computers in my housebut when i try to configure
PCMCIA support for debian it says it failed...is there
anyone that can help
Hello,
I don't find out to verify if my IrDA port works
on my Nec VERSA VX1 notebook :-|
it's unabled in the bios and the ttyS3 is then discovered.
The modules are lauch, the devices seem ok
I put a Siemmens S45 front of the irda port, I use minicom
On Mon, Aug 05, 2002 at 07:17:57PM +0200, Jord Swart <[EMAIL PROTECTED]> wrote:
> - - Multimedia keys at the side, just refuse to work, although I have to say
> that right now they don't work in windows anymore either ;-)
>
Onetouch keys work for me on XE3-GF. 5 month ago I did have problems, but
On Mon, 5 Aug 2002, Leif Hanack wrote:
> what are your experience with debian and an hp-notebook and there hardware?!
>
> little or much trouble getting debian to run?!
I recently purchased an Omnibook 4150 via an on-line vendor. My primary
use of the machine is setting up a portable Linux audio
On Mon, 5 Aug 2002, Leif Hanack wrote:
> Hello,
>
> what are your experience with debian and an hp-notebook and there hareware?!
>
> little or much trouble getting debian to run?!
Hi,
I've an OB 4150 with Debian Testing. It installed and runs
smoothly. The only problem was my AOPEN PCMCI
On Mon, Aug 05, 2002 at 04:08:41PM -0400, Neil L. Roeth wrote:
> I've been using a Xircom CEM56 Ethernet/modem PCMCIA card for a couple of
> years, but only the Ethernet part. I recently tried to get the modem part
> working, and have been unable to do so.
>
> Does anyone have any clues? Any way
Hi,
...
> tanna:/usr/bin# setserial -gG /dev/ircomm*
...
setserial should be applied to *real* serial devices, like
/dev/ttySx , also it's only neccessary in some rare cases.
You didn't mention the configuration of /etc/irda.conf ,
set the SIR device etc. there and restart IrDA.
Then watch irdad
__
Scarica il nuovo Yahoo! Messenger: con webcam, nuove faccine e tante altre
novità.
http://it.yahoo.com/mail_it/foot/?http://it.messenger.yahoo.com/
Erich Schubert <[EMAIL PROTECTED]> writes:
> You use the wrong resolution for your display.
> You should use the exact resolution that is in your notebooks docs.
> TFT Screen are designed for ONE resolution only. All other resolutions
> have to be SCALED to the hardware resolution, which probably
Dear All
Thanks for comments. However, sound still not working.
Nate Bargmann wrote:
"This might be one of those instances where you just go ahead and compile
the ALSA modules from source against your 2.4.18 kernel, which I have
done here. In the kernel config you must compile sound support as
Hello!
I posted a message yesterday asking for advice on installing Woody in a
Toshiba Portégé 3010CT. I was getting "Kernel panic: VFS Unable to mount root
fs on 01:00". I solved it and I am posting the solution for future reference.
Well... It was actually a mistake I made myself. I was tryin
On Mon, Aug 05, 2002 at 06:28:41PM -0700, Aaron White wrote:
>...but when i try to configure
> PCMCIA support for debian it says it failed...is there
> anyone that can help me with my problem
what error message is pasted ?
did you try to build the pcmcia subsystem by your own of the
pcmcia-so
According to your log output your system has the AC97 on an Intel 810
chipset. Have you looked at this page:
http://www.alsa-project.org/alsa-doc/
and taken a look at the Analog Devices lines? To the right is a button
to some specific information on either the Intel or Via chipsets
followed by
I'm wondering about playing DVDs. I managed to get DVDs playing on my
desktop -- I first got mplayer running, which took some work IIRC (as I was
stumbling through the installation and HOWTOs). I then installed ogle-mxx
and that seemed much easier. I remember it seemed odd because the css
decode
hi,
i am having weird+boring problems installing my Enterasys Roamabout DS wireless
card. when I have my 2.4.18 kernel pcmcia-core successfully installed i cannot
install the ds.o module. when i modonf the module it simply fails with a non
verbose argument. insmod is the same. the [rpm'd] manu
18 matches
Mail list logo
