Hello,
I don't find out to verify if my IrDA port works
on my Nec VERSA VX1 notebook :-|
it's unabled in the bios and the ttyS3 is then discovered.
The modules are lauch, the devices seem ok
I put a Siemmens S45 front of the irda port, I use minicom
to test AT command but nothing happens :-|
any idea ?
François
Aug 5 09:28:56 tanna kernel: Serial driver version 5.05c (2001-07-08) with
HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Aug 5 09:28:56 tanna kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Aug 5 09:28:56 tanna kernel: ttyS03 at 0x02e8 (irq = 3) is a 16550A
tanna:/usr/bin# lsmod
Module Size Used by Not tainted
ircomm 13244 0 (unused)
irtty 7488 0 (unused)
irda 153612 0 [ircomm irtty]
tanna:/usr/bin# setserial -gG /dev/ircomm*
/dev/ircomm0 uart 16550A port 0x0000 irq 0 baud_base 0 spd_normal
/dev/ircomm1 uart 16550A port 0x0000 irq 0 baud_base 0 spd_normal
tanna:/usr/bin# setserial -gG /dev/ttyS*
/dev/ttyS0 uart 16550A port 0x03f8 irq 4 baud_base 115200 spd_normal skip_test
/dev/ttyS1: pcmcia controlled device (/var/run/stab)
/dev/ttyS1 uart 16550A port 0x02f8 irq 11 baud_base 115200 spd_normal skip_test
pcmcia
/dev/ttyS2 uart unknown port 0x03e8 irq 4 baud_base 115200 spd_normal skip_test
/dev/ttyS3 uart 16550A port 0x02e8 irq 3 baud_base 115200 spd_normal
