Isn't i82365 replaced by yenta_socket in 2.4.6? I had to modify
/etc/init.d/pcmcia and /etc/pcmcia.conf to use yenta_socket instead of i82365.
On Fri, Aug 10, 2001 at 02:43:13PM +1000, Drew Parsons wrote:
> On Thu, Aug 09, 2001 at 09:21:06PM +, [EMAIL PROTECTED] SPEED GRAFIX
> INC wrote:
>
On Thu, Aug 09, 2001 at 10:54:48PM -0700, Sam Tingleff wrote:
>
> Isn't i82365 replaced by yenta_socket in 2.4.6? I had to modify
> /etc/init.d/pcmcia and /etc/pcmcia.conf to use yenta_socket instead of i82365.
>
I don't know. lsmod tells me I'm still using i82365 (kernel 2.4.7,
pcmcia-cs 3.1.
Hi,
I know this is a pretty dumb question, but time is pressing and I just
don't get it:
I bought a used ThinkPad 760E with Win95 installed. The machine has a
slot for either a CD-ROM or a floppy drive. Obviously the floppy drive
is defective (doesn't read disks under Win95 at all), and the BIOS
On Fri, Aug 10, 2001 at 12:00:43PM +0200, Gregor Hoffleit wrote:
> Hi,
>
> I know this is a pretty dumb question, but time is pressing and I just
> don't get it:
>
> I bought a used ThinkPad 760E with Win95 installed. The machine has a
> slot for either a CD-ROM or a floppy drive. Obviously the f
hi,
does anyone know if you can buy missing cables for the Xircom
pcmcia-cards?
I happen to have one here which is missing the modem-connectorcable.
---
Andor Demarteau
[EMAIL PROTECTED]
---
Hi folks!
I cannot login with kdm, gdm.or xdm. The login fails everytime (authentication
failed). On a text-console it's no problem. I don't think that something is
broken, because it's a totally new installation and in the last installation
occured the same problem. I have no more ideas. Cou
On Fri, Aug 10, 2001 at 02:28:36PM +0200, =?iso-8859-1?Q? Bernard=20Rei=DFberg
?= wrote:
>
> Hi folks!
>
> I cannot login with kdm, gdm.or xdm. The login fails everytime
> (authentication failed). On a text-console it's no problem. I don't
> think that something is broken, because it's a totall
Dear all,
I've had a lot of difficulty in atempting to get my "Laptop Dell C500"
working along with Xserver. As far as I know that computer uses "ATI
Mobility M1" card. I'm using kernel 2.2.19.
Firstly I started testing xf86_3.3.6, but since I had no success I
decided to install xf86_4.1.0. Th
On Fri, Aug 10, 2001 at 04:07:14PM +0200, Ruy de Oliveira wrote:
> I've already managed to install and run something. But, in fact, I
> cannot find the exact driver for my card. When I use the "ATI Rage 128"
> option I manage to run the X server, but I only get two simultaneous
> windows. One tit
I was wondering if anyone could help me out.
I have a toshiba 1800 with a trident Ai1 cyberblade video card. I am
having trouble setting up the xf86config.
I keep on getting errors when trying to startx. Please let me know if
anyone has a fix for me.
Thanks
Domenic
Dear all,
I figured out that, in fact , I have three windows instead of two like I said
before. Also, I found that the TWM is running but I cannot do many useful
things on it other than to type and execute the
shell commands.
Please send me your suggestions.
Thank you very much,
Ruy.
Ruy
Give a description of your errors please.
--mike
On 10 Aug 2001 12:58:38 -0400, Domenic Versace wrote:
> I was wondering if anyone could help me out.
>
> I have a toshiba 1800 with a trident Ai1 cyberblade video card. I am
> having trouble setting up the xf86config.
> I keep on getting errors wh
ebay?
Heck, you can probably buy a replacement card complete with
cables on ebay for what such a specialty cable would cost retail.
On the other hand, I don't know what shipping costs to .nl .
Is there an eBay Europe or equivalent? (Sometimes I see GBP
prices on eBay, so I guess they at least hav
I'm running Woody on a Dell Inspiron 8000 - I have a cable Internet
connection through a D-Link DFE-650 PCMCIA card. The connection worked fine
until I installed kernel 2.4.7 - now it doesn't work at all. It took some
messing around to get it to work initially, so I've become somewhat
familiar
Hi all,
This question, in brief is - where is the vfat filesystem documented?
My Sharp M200 comes with a recovery CD which rewrites the hard disk
right back to original everything if I use it. So now I have a routine
which, in case of disaster I can edit into the partition table
enough to insert,
Hi,
I know this is a pretty dumb question, but time is pressing and I just
don't get it:
I bought a used ThinkPad 760E with Win95 installed. The machine has a
slot for either a CD-ROM or a floppy drive. Obviously the floppy drive
is defective (doesn't read disks under Win95 at all), and the BIOS
On Fri, Aug 10, 2001 at 12:00:43PM +0200, Gregor Hoffleit wrote:
> Hi,
>
> I know this is a pretty dumb question, but time is pressing and I just
> don't get it:
>
> I bought a used ThinkPad 760E with Win95 installed. The machine has a
> slot for either a CD-ROM or a floppy drive. Obviously the
hi,
does anyone know if you can buy missing cables for the Xircom
pcmcia-cards?
I happen to have one here which is missing the modem-connectorcable.
---
Andor Demarteau
[EMAIL PROTECTED]
---
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Troubl
Hi folks!
I cannot login with kdm, gdm.or xdm. The login fails everytime (authentication
failed). On a text-console it's no problem. I don't think that something is broken,
because it's a totally new installation and in the last installation occured the same
problem. I have no more ideas. Co
On Fri, Aug 10, 2001 at 02:28:36PM +0200, =?iso-8859-1?Q? Bernard=20Rei=DFberg ?=
wrote:
>
> Hi folks!
>
> I cannot login with kdm, gdm.or xdm. The login fails everytime
> (authentication failed). On a text-console it's no problem. I don't
> think that something is broken, because it's a total
On Fri, Aug 10, 2001 at 04:07:14PM +0200, Ruy de Oliveira wrote:
> I've already managed to install and run something. But, in fact, I
> cannot find the exact driver for my card. When I use the "ATI Rage 128"
> option I manage to run the X server, but I only get two simultaneous
> windows. One ti
I was wondering if anyone could help me out.
I have a toshiba 1800 with a trident Ai1 cyberblade video card. I am
having trouble setting up the xf86config.
I keep on getting errors when trying to startx. Please let me know if
anyone has a fix for me.
Thanks
Domenic
--
To UNSUBSCRIBE, ema
Give a description of your errors please.
--mike
On 10 Aug 2001 12:58:38 -0400, Domenic Versace wrote:
> I was wondering if anyone could help me out.
>
> I have a toshiba 1800 with a trident Ai1 cyberblade video card. I am
> having trouble setting up the xf86config.
> I keep on getting errors w
ebay?
Heck, you can probably buy a replacement card complete with
cables on ebay for what such a specialty cable would cost retail.
On the other hand, I don't know what shipping costs to .nl .
Is there an eBay Europe or equivalent? (Sometimes I see GBP
prices on eBay, so I guess they at least ha
24 matches
Mail list logo
