Hi.
I'm trying to use my laptop at a resolution lower than 1400x1050, but the
thing refuses to actually go to that resolution, instead it only shows a
part of the screen, which itself has that resolution. Thus, if I ask for
640x480, I get a really small rectangle in the middle of the screen th
Hi;
I have Woody Toshiba 1800-254. And sometimes.. it cames very very slow.
Its very slow with apt-get and in X.
Also, I used Mandrake before Woody and my Laptop was very fast (The X
run really run fast, also I use it to see some DVD movies).
I tried to compile my Kernel exactly as Mandrake, and
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi;
I have Woody Toshiba 1800-254. And sometimes.. it cames very very slow.
Its very slow with apt-get and in X.
Also, I used Mandrake before Woody and my Laptop was very fast (The X
run really run fast, also I use it to see some DVD movies).
I tried to compile my Kernel exactly as Mandrake, and
>
> well, dmesg says:
> radeonfb: ATI Radeon M7 LW DDR SGRAM 32 MB
>
> but lspci -v sasy:
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LW
> (prog-if 00 [VGA])\
>
> Guess I'm a bit confused here.
>
This is a mismatch in the kernel code somewhere. The later ke
Use the yenta driver instead in pcmcia.conf; that
may help.
mono toy wrote:
dear list,
i forgot, i also have this in my logs:
/lib/modules/2.4.18-bf2.4/pcmcia/i82365.o: init_module: no such device
/lib/modules/2.4.18-bf2.4/pcmcia/ds.o: init_module: operation not permitted
many thanks,
nico
There's a pretty good mailing list at
http://swiss.ai.mit.edu/projects/omnibook
that might be of some help. Try also:
http://www.linux-laptop.net and
http://www.mobilix.org.
mono toy wrote:
dear list,
does anyone have experience with debian on HP models?
i finally managed to get basic things
dear list,
i forgot, i also have this in my logs:
/lib/modules/2.4.18-bf2.4/pcmcia/i82365.o: init_module: no such device
/lib/modules/2.4.18-bf2.4/pcmcia/ds.o: init_module: operation not permitted
many thanks,
nico
dear list,
does anyone have experience with debian on HP models?
i finally managed to get basic things to work on my xt1500, but no luck with
pcmcia nor floppy.
- pcmcia: it just says:
Linux PCMCIA services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [
Alvarez, Angel said (02/12/18 16:51) :
> I?m installing woody in an IBM think pad A20m but when I insert de
> pcmcia network card
> (IBM etherjet 32 bits) the network is OK but the the keyboard locks
> numbers and if I try
> to press p o i u j k l or m these keys are not working
Hi,
I get almos
>
> well, dmesg says:
> radeonfb: ATI Radeon M7 LW DDR SGRAM 32 MB
>
> but lspci -v sasy:
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LW
> (prog-if 00 [VGA])\
>
> Guess I'm a bit confused here.
>
This is a mismatch in the kernel code somewhere. The later ke
Use the yenta driver instead in pcmcia.conf; that
may help.
mono toy wrote:
dear list,
i forgot, i also have this in my logs:
/lib/modules/2.4.18-bf2.4/pcmcia/i82365.o: init_module: no such device
/lib/modules/2.4.18-bf2.4/pcmcia/ds.o: init_module: operation not permitted
many thanks,
nico
There's a pretty good mailing list at
http://swiss.ai.mit.edu/projects/omnibook
that might be of some help. Try also:
http://www.linux-laptop.net and
http://www.mobilix.org.
mono toy wrote:
dear list,
does anyone have experience with debian on HP models?
i finally managed to get basic things t
Oops, I originally sent this to the wrong list. Sorry...
I am considering purchasing this notebook and installing Debian on it.
I've checked linux-on-laptops.com and mobilix.org for info on this
laptop, without any luck. I also couldn't find any help on Google about
installing linux on this par
dear list,
i forgot, i also have this in my logs:
/lib/modules/2.4.18-bf2.4/pcmcia/i82365.o: init_module: no such device
/lib/modules/2.4.18-bf2.4/pcmcia/ds.o: init_module: operation not permitted
many thanks,
nico
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe"
dear list,
does anyone have experience with debian on HP models?
i finally managed to get basic things to work on my xt1500, but no luck with
pcmcia nor floppy.
- pcmcia: it just says:
Linux PCMCIA services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [
Alvarez, Angel said (02/12/18 16:51) :
> I?m installing woody in an IBM think pad A20m but when I insert de
> pcmcia network card
> (IBM etherjet 32 bits) the network is OK but the the keyboard locks
> numbers and if I try
> to press p o i u j k l or m these keys are not working
Hi,
I get almos
hi to everyone is the first time that i wrote to this mail ,so forgiveme
if the problem could be repeted anotheer time.
I've got an extensa 390 acer with 64mb ram and a pcmcia networkcard
3ccfe575bt.
I'm not able to run the card,doing ping i've got all the pockets lost
at the cross cable.To resolve
Oops, I originally sent this to the wrong list. Sorry...
I am considering purchasing this notebook and installing Debian on it.
I've checked linux-on-laptops.com and mobilix.org for info on this
laptop, without any luck. I also couldn't find any help on Google about
installing linux on this par
On Wednesday 18 December 2002 11:35 pm, Levi Waldron wrote:
> On December 18, 2002 06:11 am, Aryan Ameri wrote:
> > command "startx" it gives me fatal errors like: "no screen found". I
> > checked the screen section of the XFree86 config file, and it seems to be
> > ok. As I
>
> I've gotten this er
On December 18, 2002 06:11 am, Aryan Ameri wrote:
> command "startx" it gives me fatal errors like: "no screen found". I
> checked the screen section of the XFree86 config file, and it seems to be
> ok. As I
I've gotten this error message after going through the dbootstrap
installation on a coupl
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi guys
I´m installing woody in an IBM think pad A20m but when I insert de
pcmcia network card
(IBM etherjet 32 bits) the network is OK but the the keyboard locks
numbers and if I try
to press p o i u j k l or m these keys are not working
If a remov
hi to everyone is the first time that i wrote to this mail ,so forgiveme
if the problem could be repeted anotheer time.
I've got an extensa 390 acer with 64mb ram and a pcmcia networkcard
3ccfe575bt.
I'm not able to run the card,doing ping i've got all the pockets lost
at the cross cable.To resolve
On Wednesday 18 December 2002 09:00 pm, Guillaume wrote:
> Hi,
>
> >I upgraded X to 4.2.1 but things didn't improve. Am I missing anything
> here?
>
> don't forget to upgrade xutil 4.2 and pciutil too( because it reports the
> pci/agp prob ).
> then check that the radeon module is loaded in your k
On Wednesday 18 December 2002 09:18 pm, Albert Dengg wrote:
> > Well, According to 4.1.0 release documentation (
> > http://www.xfree.org/4.1.0/Status6.html#6 ): Accelerated support is
> > provided for Mach64, Rage, Rage 128 and Radeon chips.
>
> As far as i now, radeon cards are supported ut for s
On Wednesday 18 December 2002 11:35 pm, Levi Waldron wrote:
> On December 18, 2002 06:11 am, Aryan Ameri wrote:
> > command "startx" it gives me fatal errors like: "no screen found". I
> > checked the screen section of the XFree86 config file, and it seems to be
> > ok. As I
>
> I've gotten this er
On December 18, 2002 06:11 am, Aryan Ameri wrote:
> command "startx" it gives me fatal errors like: "no screen found". I
> checked the screen section of the XFree86 config file, and it seems to be
> ok. As I
I've gotten this error message after going through the dbootstrap
installation on a coupl
Sebastian Henschel wrote:
hello miguel..
Received at 2002-12-17 / 09:07 by Miguel Griffa:
I have an onboard sound at io 0x220, and so,
I use alsaconf to configure the card I want, everything seems fine
untils alsa runs
then, it complains about bad parameters being passed to module, and th
i found something that might help you...
http://perso.wanadoo.es/djsucre/i4150/english.html
it is for a dell laptop but has the same graphics card...
he even posted his XF86Config-4 file...
I hope it helps...
mfg Albert Dengg
--
Albert Dengg <[EMAIL PROTECTED]>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi guys
I´m installing woody in an IBM think pad A20m but when I insert de
pcmcia network card
(IBM etherjet 32 bits) the network is OK but the the keyboard locks
numbers and if I try
to press p o i u j k l or m these keys are not working
If a remov
> Well, According to 4.1.0 release documentation (
> http://www.xfree.org/4.1.0/Status6.html#6 ): Accelerated support is
> provided for Mach64, Rage, Rage 128 and Radeon chips.
As far as i now, radeon cards are supported ut for some reason not the
radeon mobilty...
> Btw, as I said in my previous
On Wednesday 18 December 2002 03:36 pm, William Enck wrote:
> I have an ATI Radeon 7500 mobility in my Dell i4150. Everything is
> working find in unstable with X 4.2.1
>
> First, how did you configure X? Did you use debconf? Debconf doesn't
> give the "radeon" option when selecting the driver for
On Wednesday 18 December 2002 04:46 pm, you wrote:
> > I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500
> > mobiliti as it's video card. Using woody...
>
> The ATI Radeon Mobilty is support with Xfree86 4.2 and above, as far as
> i know
> since Stable(woody) uses 4.1, it won't wor
On Wednesday 18 December 2002 09:00 pm, Guillaume wrote:
> Hi,
>
> >I upgraded X to 4.2.1 but things didn't improve. Am I missing anything
> here?
>
> don't forget to upgrade xutil 4.2 and pciutil too( because it reports the
> pci/agp prob ).
> then check that the radeon module is loaded in your k
On Wednesday 18 December 2002 09:18 pm, Albert Dengg wrote:
> > Well, According to 4.1.0 release documentation (
> > http://www.xfree.org/4.1.0/Status6.html#6 ): Accelerated support is
> > provided for Mach64, Rage, Rage 128 and Radeon chips.
>
> As far as i now, radeon cards are supported ut for s
Sebastian Henschel wrote:
hello miguel..
Received at 2002-12-17 / 09:07 by Miguel Griffa:
I have an onboard sound at io 0x220, and so,
I use alsaconf to configure the card I want, everything seems fine
untils alsa runs
then, it complains about bad parameters being passed to module, and then
i found something that might help you...
http://perso.wanadoo.es/djsucre/i4150/english.html
it is for a dell laptop but has the same graphics card...
he even posted his XF86Config-4 file...
I hope it helps...
mfg Albert Dengg
--
Albert Dengg <[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [E
> Well, According to 4.1.0 release documentation (
> http://www.xfree.org/4.1.0/Status6.html#6 ): Accelerated support is
> provided for Mach64, Rage, Rage 128 and Radeon chips.
As far as i now, radeon cards are supported ut for some reason not the
radeon mobilty...
> Btw, as I said in my previous
From: "Baruch Even" <[EMAIL PROTECTED]>
> It appears that ACPI doesn't work properly for your machine, try not to
> apply the swsusp patch.
>
> If the problem persists you should take it with the acpi maintainers
> from http://acpi.sourceforge.net/
> I do not know enough about ACPI to figure out t
On Wednesday 18 December 2002 03:36 pm, William Enck wrote:
> I have an ATI Radeon 7500 mobility in my Dell i4150. Everything is
> working find in unstable with X 4.2.1
>
> First, how did you configure X? Did you use debconf? Debconf doesn't
> give the "radeon" option when selecting the driver for
On Wednesday 18 December 2002 04:46 pm, you wrote:
> > I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500
> > mobiliti as it's video card. Using woody...
>
> The ATI Radeon Mobilty is support with Xfree86 4.2 and above, as far as
> i know
> since Stable(woody) uses 4.1, it won't wor
Hello,
I use NEC laptop since 3 years and I had no pb ti use debian on it.
Actually, I use a VERSA L320 and everything is ok
François
Intel(R) Pentium(R) III Mobile CPU 1133MHz
30 Go Disk
tanna:/home/ftp# lspci
00:00.0 Host bridge: Intel
It appears that ACPI doesn't work properly for your machine, try not to
apply the swsusp patch.
If the problem persists you should take it with the acpi maintainers
from http://acpi.sourceforge.net/
I do not know enough about ACPI to figure out the reason for this
problem.
Baruch
* Riccardo Guss
On Wed, Dec 18, 2002 at 02:34:24PM +0100, Albert Dengg wrote:
> has anybody an idea if it is possible to get a fb running on a
> Gericom Overdose3 (sis630 chipset)? (the vesa,sis and vga16 ones do
> not work, anyway not with the standard parameters...)
Try the sisfb from http://www.winischhofer.n
On Wednesday 18 December 2002 15:01, Albert Dengg wrote:
> > Little question first: does one need to supply a certain param through
> > lilo to get this thing working? I had a Dell CPI A 366XT first, and
> > there i just selected the 'neomagic' framebuffer and it automagically
> > changed the scree
On Wednesday 18 December 2002 13:34, Albert Dengg wrote:
> hi
> has anybody an idea if it is possible to get a fb running on a Gericom
> Overdose3 (sis630 chipset)?
> (the vesa,sis and vga16 ones do not work, anyway not with the standard
> parameters...)
Are you using the standard kernel fb suppor
> Little question first: does one need to supply a certain param through
> lilo to get this thing working? I had a Dell CPI A 366XT first, and
> there i just selected the 'neomagic' framebuffer and it automagically
> changed the screen to 1024x768. Without any paramters.
>
> Do i need to pass any
From: "Baruch Even" <[EMAIL PROTECTED]>
> It appears that ACPI doesn't work properly for your machine, try not to
> apply the swsusp patch.
>
> If the problem persists you should take it with the acpi maintainers
> from http://acpi.sourceforge.net/
> I do not know enough about ACPI to figure out t
On Wednesday 18 December 2002 14:20, Albert Dengg wrote:
> try using the vesafb
> ...the only big problem is that with higher resolutions it gehts a bit
> slow
Hmm.
Little question first: does one need to supply a certain param through lilo to
get this thing working? I had a Dell CPI A 366XT
hi
has anybody an idea if it is possible to get a fb running on a Gericom
Overdose3 (sis630 chipset)?
(the vesa,sis and vga16 ones do not work, anyway not with the standard
parameters...)
the other problem that i have is quite minor but it would be nice to
find a solution...
does anybody have a cl
try using the vesafb
...the only big problem is that with higher resolutions it gehts a bit
slow
--
Albert Dengg <[EMAIL PROTECTED]>
> I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500
> mobiliti as it's video card. Using woody...
The ATI Radeon Mobilty is support with Xfree86 4.2 and above, as far as
i know
since Stable(woody) uses 4.1, it won't work.
you have 3 choices I think:
1. upgrade to unstable or testin
hello miguel..
Received at 2002-12-17 / 09:07 by Miguel Griffa:
> I have an onboard sound at io 0x220, and so,
> I use alsaconf to configure the card I want, everything seems fine
> untils alsa runs
> then, it complains about bad parameters being passed to module, and then
> says card probably
On Sunday 15 December 2002 07:14, Baruch Even wrote:
> Hello,
>
> Due to the need to update the ACPI subsystem with the patch from
> sourceforge I've packaged it together with the software suspend patch.
>
> The patch also includes debian-unacpi.diff in order to remove the ACPI
> modifications that
Hello,
I use NEC laptop since 3 years and I had no pb ti use debian on it.
Actually, I use a VERSA L320 and everything is ok
François
Intel(R) Pentium(R) III Mobile CPU 1133MHz
30 Go Disk
tanna:/home/ftp# lspci
00:00.0 Host b
It appears that ACPI doesn't work properly for your machine, try not to
apply the swsusp patch.
If the problem persists you should take it with the acpi maintainers
from http://acpi.sourceforge.net/
I do not know enough about ACPI to figure out the reason for this
problem.
Baruch
* Riccardo Guss
On Wed, Dec 18, 2002 at 02:34:24PM +0100, Albert Dengg wrote:
> has anybody an idea if it is possible to get a fb running on a
> Gericom Overdose3 (sis630 chipset)? (the vesa,sis and vga16 ones do
> not work, anyway not with the standard parameters...)
Try the sisfb from http://www.winischhofer.n
Just mentioning that I got this thing installed.
I have one question tho: How do I get my framebuffer to work on this thing? I
activated in the kernel the Mach64 support, but it still remains a stupid
80x25 screen, no pinguin logo :-((
Any ideas?
DK
On Wednesday 18 December 2002 15:01, Albert Dengg wrote:
> > Little question first: does one need to supply a certain param through
> > lilo to get this thing working? I had a Dell CPI A 366XT first, and
> > there i just selected the 'neomagic' framebuffer and it automagically
> > changed the scree
On Wednesday 18 December 2002 13:34, Albert Dengg wrote:
> hi
> has anybody an idea if it is possible to get a fb running on a Gericom
> Overdose3 (sis630 chipset)?
> (the vesa,sis and vga16 ones do not work, anyway not with the standard
> parameters...)
Are you using the standard kernel fb suppor
Hello,
On Wed, Dec 18, 2002 at 02:41:55PM +0330, Aryan Ameri wrote:
> it's video card. Using woody, I can't setup my X server. when I issue the
> command "startx" it gives me fatal errors like: "no screen found". I checked
> the screen section of the XFree86 config file, and it seems to be ok. A
I have an ATI Radeon 7500 mobility in my Dell i4150. Everything is
working find in unstable with X 4.2.1
First, how did you configure X? Did you use debconf? Debconf doesn't
give the "radeon" option when selecting the driver for you card.
Also, what does your config look like? And what exactly is
> Little question first: does one need to supply a certain param through
> lilo to get this thing working? I had a Dell CPI A 366XT first, and
> there i just selected the 'neomagic' framebuffer and it automagically
> changed the screen to 1024x768. Without any paramters.
>
> Do i need to pass any
On Wednesday 18 December 2002 14:20, Albert Dengg wrote:
> try using the vesafb
> ...the only big problem is that with higher resolutions it gehts a bit
> slow
Hmm.
Little question first: does one need to supply a certain param through lilo to
get this thing working? I had a Dell CPI A 366XT
hi
has anybody an idea if it is possible to get a fb running on a Gericom
Overdose3 (sis630 chipset)?
(the vesa,sis and vga16 ones do not work, anyway not with the standard
parameters...)
the other problem that i have is quite minor but it would be nice to
find a solution...
does anybody have a cl
try using the vesafb
...the only big problem is that with higher resolutions it gehts a bit
slow
--
Albert Dengg <[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
> I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500
> mobiliti as it's video card. Using woody...
The ATI Radeon Mobilty is support with Xfree86 4.2 and above, as far as
i know
since Stable(woody) uses 4.1, it won't work.
you have 3 choices I think:
1. upgrade to unstable or testin
hello miguel..
Received at 2002-12-17 / 09:07 by Miguel Griffa:
> I have an onboard sound at io 0x220, and so,
> I use alsaconf to configure the card I want, everything seems fine
> untils alsa runs
> then, it complains about bad parameters being passed to module, and then
> says card probably
Hi there:
Guess I'm new around here, so hello to everyone.
I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500 mobiliti as
it's video card. Using woody, I can't setup my X server. when I issue the
command "startx" it gives me fatal errors like: "no screen found". I checked
the scr
> feedback. The model I am interested in is a LaVie LC950/4E (as it is
At http://mobilix.org/nec.html you may find something about
Debian on a Japanese NEC PC98 laptop. Hope this helps.
Werner
--
|=| Werner Heuser = Keplerstr. 11A = D-10589 Berlin = Germany
|=| T. 0049 - (0)30 - 349 53 86
On Sunday 15 December 2002 07:14, Baruch Even wrote:
> Hello,
>
> Due to the need to update the ACPI subsystem with the patch from
> sourceforge I've packaged it together with the software suspend patch.
>
> The patch also includes debian-unacpi.diff in order to remove the ACPI
> modifications that
Just mentioning that I got this thing installed.
I have one question tho: How do I get my framebuffer to work on this thing? I
activated in the kernel the Mach64 support, but it still remains a stupid
80x25 screen, no pinguin logo :-((
Any ideas?
DK
--
To UNSUBSCRIBE, email to [EMAIL PROTECT
Hello,
On Wed, Dec 18, 2002 at 02:41:55PM +0330, Aryan Ameri wrote:
> it's video card. Using woody, I can't setup my X server. when I issue the
> command "startx" it gives me fatal errors like: "no screen found". I checked
> the screen section of the XFree86 config file, and it seems to be ok. A
Hi,
Have been looking for information about possible problems running Debian
on a new NEC laptop, without much success. Would appreciate any
feedback. The model I am interested in is a LaVie LC950/4E (as it is
known in Japan ... it may go by another name elsewhere, possibly part of
the Versa se
I have an ATI Radeon 7500 mobility in my Dell i4150. Everything is
working find in unstable with X 4.2.1
First, how did you configure X? Did you use debconf? Debconf doesn't
give the "radeon" option when selecting the driver for you card.
Also, what does your config look like? And what exactly is
On Wed, 18 Dec 2002 10:16, Matthias Hentges wrote:
> > alcatel speedtouch usb adsl modem
>
> Have a look at this page (Google is your friend)
> http://linux-usb.sourceforge.net/SpeedTouch/
>
> > USB askey ale070 (I think the full name is Dynalink ALE070 USB ADSL
My package kernel-patch-2.4-speedto
Hi there:
Guess I'm new around here, so hello to everyone.
I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500 mobiliti as
it's video card. Using woody, I can't setup my X server. when I issue the
command "startx" it gives me fatal errors like: "no screen found". I checked
the scr
Am Die, 2002-12-17 um 22.39 schrieb Micha Feigin:
> I was thinking of connecting to adsl, and got a choice of the folowing
> two modems, both usb, and I was wondering if they work under a beige G3
> mac running debian.
> I'll also need to install a usb card so if there is any trouble with
> these a
> feedback. The model I am interested in is a LaVie LC950/4E (as it is
At http://mobilix.org/nec.html you may find something about
Debian on a Japanese NEC PC98 laptop. Hope this helps.
Werner
--
|=| Werner Heuser = Keplerstr. 11A = D-10589 Berlin = Germany
|=| T. 0049 - (0)30 - 349 53 86
Hi,
Have been looking for information about possible problems running Debian
on a new NEC laptop, without much success. Would appreciate any
feedback. The model I am interested in is a LaVie LC950/4E (as it is
known in Japan ... it may go by another name elsewhere, possibly part of
the Versa se
On Wed, 18 Dec 2002 10:16, Matthias Hentges wrote:
> > alcatel speedtouch usb adsl modem
>
> Have a look at this page (Google is your friend)
> http://linux-usb.sourceforge.net/SpeedTouch/
>
> > USB askey ale070 (I think the full name is Dynalink ALE070 USB ADSL
My package kernel-patch-2.4-speedto
Am Die, 2002-12-17 um 22.39 schrieb Micha Feigin:
> I was thinking of connecting to adsl, and got a choice of the folowing
> two modems, both usb, and I was wondering if they work under a beige G3
> mac running debian.
> I'll also need to install a usb card so if there is any trouble with
> these a
* David B Harris <[EMAIL PROTECTED]> [021218 07:41]:
> On Tue, 17 Dec 2002 06:54:42 +0200
> Baruch Even <[EMAIL PROTECTED]> wrote:
> > I do not use KDE or KLaptopDaemon so I don't know anything about this
> > patch, and since I probably can't test it on my machine I wouldn't be
> > able to package
* martin f krafft <[EMAIL PROTECTED]> [021218 07:41]:
> also sprach Baruch Even <[EMAIL PROTECTED]> [2002.12.17.0552 +0100]:
> > If you or anyone else wants to take my package and add it to the Debian
> > archive I would be happy, but for now I'm content with it outside the
> > archive.
>
> I thin
85 matches
Mail list logo
