in.telnetd

what packages contain telnetd? I see xinetd package for loading it but where is the basic telnetd just loaded 2.2r2/i386 on a system but telnet isn't answering and i'm remote now. I need to tell the onsite person what to do to get telnetd running e.g. apt-get ... ... ... or ftp ... then install

not to start a firestorm but

Can someone point me to a good place to find out quality of international connectivity for a provider. Specifically commcast. they have offered us a very attractive connectivity offer and my only concern is if my international clients will see drastic drop in connectivity quality. We are currentl

bridging firewall capacities

Does the linux kernel use dual processors for network coding such as for a briding firewall system whith ipchains rules running on it--e.g. using the ipchains bridge patches. I want to build a briding firewall but don't want it to stop dropping packets so, for example dual 1G intel system with 1

off site assistance

Hi: I am blind and work in a small data center. Since I can't read screens I need to get sighted people to read for me. I know what I'm doing on the systems but need readers to tell me whats happening. I'm looking for suggested hardware to allow me to easily in realtime send the screen images from

dot files for wu-ftpd

OK maybe off topic but I don't want to get back on the wu-ftpd list to find this easy one. how do I make dot files visible in wu-ftpd? thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

files systems size limit

suggestions for files system that will allow larger than 1tb using sofrware linear raid wold be appreciated. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

p6stp-fl motherboard from ECS

Anyone made this board work with network? Its a sis630e chipset. they are cheap. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

analog program status

anybody been to www.analog.cx in past day or two? I'm wondering if analog has a new home or what I'm not getting there and maybe its my system. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

answered my own analog question

To answer my own question see this from the www.niccx.com hidden link home page. Hope the analog.cx site will move to .org or some such. [INLINE] [INLINE] Dot CX Limited is a community owned non-profit Christmas Island Company, the objects of which are to be: * trustee an

hardware recommendation

anyone have recommendation for these specifications: motherboard that fits in 1u case onboard lan and video no scsi dual cpu upto 1Ghz cpu price range: $180 and under I want to put a acceleraid on it on the pci slot so don't need the onboard scsi like the s2510u3ng from Tyan trying to save some

dmesg entry

anyone know what this entry would mean in dmesg? see bottom of dmesg output for the treason line. Linux version 2.4.2-2 ([EMAIL PROTECTED]) (gcc version 2.96 2731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001 BIOS-provided physical RAM map: BIOS-e820: 0009fc00 @ 0

portable recommendation

Hi: Let me give my requirements and see if anyone has a recommended solution. 1. I am a blind network admin, and am off site much of the time. 2. I want a device ideally that would vibrate when a notification comes in, and read me the text when a button is pushed. And, allow online logins to i

ecs k7sem sis730 chipset

does anyone know if the ecs k7sem motherboard with onboard lan video and sound works for a server--e.g. I don't care of X works, just the lan, and hard drives. with 700mhz duron $94 on pricewatch! geez thats a lot for the money. add 1u power supply $53, and 256mb ram (may need faster ram but prob

IBM 300gl w/ Pentium 200mmbx

can anyone tell me what kind of ram to get to fit the dimms in the IBM 300gl with a p200mmx CPU. Its a 300gl looking for model number now. I think it takes parity pc100 ram and then how to find cheap ram? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? C

semi-off-topic dlink 804 dls router

can soeone tell me how to get a D Link 804 dls router to allow port 80 to pass thru. e.g. using virtual services. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: FTP thro' firewall

I highly recommend the rcf firewall which can be found at http://rcf.mvlan.net > On Wed, 29 Aug 2001, Michael Wood wrote: > > > I don't know what "Mandrake SNF" is > > Mandrakesoft's Single Network Firewall -- a pre-built template for an > ipchains rules firewall, controlled by a web browser +

yeah yeah another ethernet post

I hear loads of Tulip card rages, but other than the netgear and Dlink issues I have lots of cards running for years here under all kinds of variable loading. They work OK, even stuff like the d9102 on bookPC, the ethernets on Intel motherboards, the 3com's had issues with correctly setting themse

arin, portable space, and obfuscation

Hi: Can someone tell me how to get portable ip space in 2 locations without needing a /21 in each location? I don't understand how this can be done so that route announcing works reliablly. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PR

WTC follow up

Announce Communications Inc may be able to assist if anyone affected by NYC disasters needs help. send email to [EMAIL PROTECTED] and if we can we'll be of assistance. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

proxy question

is this easy or hard to do. I want to set up a proxy server that takes incoming requests distributes them to back end web servers, who then respond directly to the client not thru the proxy. e.g. imcoing http request to proxy proxy to web server web server to originator of request

fv24 motherboard and firewire drives

anyone know shat support is available for using primary system drive on firewire -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

1u power supplies

Does anyone know where to get a 1u atx or matx power supply? thanks. p.s. PC Power & Cooling are bing cagey if they have one or not.

1u power supplies anyone

Anybody know where to purchase a 1u 145w or 150w atx or matx power supply? thanks.

Davicom 9102 driver

Anyone have a install CD that will support the Davicom 9102 network cards without lots of messing around? Its in the 2.2.14 kernel but is it in the module list for Debian?

potato install from floppy

Hi: I'm gettingthe following error while installing using rescue.bin floppy on a celeron 433 with 128MB ram and 10 bg hard drive after entering normal default at boot prompt: after root disk is inserted: kmod: failed to execute /sbin/modprobe -s -k binfmt-464c,errno = 8 repeated 4 times kernel pan

followup install of potato

I used: the disks-i386/image-1.44/rescue.bin and the disks-i386/images-1.44/udma66 rescue.bin and root.bin no different at this point

ca810eal install and NFS question

Hi: using a debian 2.1r2 CD, and ca810eeal motherboard how do I get it to do lilo correctly on a 10gb IDE drive? and how do I get it to recognize the onboard intel ether express 10/100 network device? and How do I make NFS more tolerant if it has a drive error and can't read--it shouldn't make th

more mailserver solutions

look at atdot.org also

off topic questions about managed switch

You can answer by perosnal email to [EMAIL PROTECTED] if you think this is too far off topic. I'm interested in best price point options for a 24 port 10/100 managed switch. e.g. Cisco 2900 series? #com? Lucent? Samsung?

OK I should have asked for this earlier

At the risk of asking twice: Please someone recommend a web based help-desk type tracking system to me. I'd like it to be flexible, stable, and fairly straightforward to setup and administer. It doesn't have to do everything imaginable, but straightforward trouble ticket and tracking functions w

ide hd question

Using an Intel ca810eal motherboard and 2 identical drives, why does the drive on hdc show up with different parameters than hda? And how do I fix this behavior? e.g. one shows up with LBA type parameters and works fine one shows with non LBA parameters. |Does the kernel take the boot params for hd

Returned mail: User unknown (fwd)

--- Begin Message --- The original message was received at Wed, 7 Jun 2000 12:14:21 -0400 from [EMAIL PROTECTED] - The following addresses had permanent fatal errors - debian-isp.lists.debian.org - Transcript of session follows - 550 debian-isp.lists.debian.org... User unkno

hardware recommendations

This is probably off topic, if so please ignore me I won't repost. I'm looking where to buy the reset switches that come on new computers. I need to get several, and haven't found out where to purchase them. Radio shack has strange looking ones not normal. Thanks. y

commercial offerings anyone

Hello: Does anyone have Debian based commercial ofrerings of this kind: 1. Terminal server for connecting one box to many serial devices such as routers, switches, other terminal servers for serial connectivity when network is down. Cheap dial in box for single line use. Also, t

references

Hi: can someone point me at correct refrences for a client to use internal ips and dynamic dns with portfowarding to alolw him to ssh into his boxes inside the home shared server doing msq? e.g. he can use all the internal ip(s) he wants and with the use of dynamic dns updates access each internal

hardware scsi raid recommendation

I'm trying to build a system with hardware SCSI raid, any suggestions welcome. Its a simple system with 2 drives.

fiber

Can someone comment here on reasons to use fiber for network cable now instead of old style standard cat5 cable? I see lots of fiber equipment out there but 100mbps is 100mbps right? Is fiber economical when you get into over 100mbps situations? thanks.

motherboard recommendations

anyone who can recommend a good motherboard for small to medium sized web server would be greatly appreciated. I'd like to get boards that have onboard integraed LAN and video.

dfme network driver

Hi: does anyone know if the dfme network driver is available during a debian 2.2 install? If so, dos it show up on the list of cards, and which hardare set should I get for the following items: I'll use a machine with udma66 drives, and the dfme network onboard. under RH Ihave to use insmod after

onsite web cam

Hi: I'd like to put up a web cam to that clients can see their equipment. I had done some messing around a while back pointing the camera at the screen and clients could read it mostly. Also good. but, what I need is to know if anyone can recommend a USB based web cam that works on a LInux box. I

proc/sys/net/tcp settings

Can someone point me at good docs for the /proc/sys/net/tcp files? I want to find ways of making syn floods go away.

syslogd reference

Hi: I'm looking for a reference on setting up remote syslog operations. I wont to send syslog info from a Cisco 7206 to a linux logger. I sort of get ohw to use the -r and hosts list to make the daemon listen, but hwo to set up the other end is my problem any references for system to system or rout

never ind I found it

thanks if someone is about to answer about syslogd I found it kern.* @hostanme add entry to services and use -r option.

cisco 2924-xl vs 3524-xl

would someone give me a brief run donw on the difference bwtween Cisco Catalyst 2924-xl and 3524-xl thanks

ping of death attacks

Yes, I should find this elsewhere, but for speed's sake I'll ask here anyway. Is Linux Debian or other vulnerable to "ping of death" DOS attacks? Thanks.

wml mime for apache

Hi: I have a user wanting to use .wml files for "wap" gateway. I know nothing! Can someone send me the mime-type entry I should put in for this type of file? Thanks.

strange msgs

Hi: with kernel 2.2.14 and varying hardware I have seen messages on boot like this: neighbor table overflow neighbor table overflow and when trying to manually configure the ethernet interface which is using eepro100 module no buffer space available can't ping self in this condition. anybody know

intel 815 lan drivers

do the eepro100 drivers work for the intel 815 motherboard?

ipchains or iptables either way

Can I do the following and is there a nice script to generate the firewall rules for it? for interface eth0: assign ip and run dns service on it only. disallow all else accept ssh from particular source. for eth0:1 ... n: assigne separate ip and run httpd, and afew others on it. ba

intel 815eaal motherboard

After offering the board to a guy with the stipulation Make the board load Linux nicely" and its yours The results are as follows: "added a PCI identifier string" to the eepro100 module and it works fine. The problem was that it was not running the Intel Ethernet Express module during install. T

off topic but...

can someone tell me the access-list to create on a cisco IOS 12 box to rate limite the following: a /24 from ###.###.23.1-224 to rate limit them to no limit on incoming and only 1.5MBPS on outgoing. Thanks.

transparent firewall box

Hi: Can someone recommend the following configs: I want a box that is basically transparent to the internal clients. e.g. router firewall box1 box2 box3 box4 so box1 2 3 and 4 use the router's ip(s) as gateway and not the firewall's internal ethernet.

load balancer

Is there a distribution that will cheaply replace a load balancer? e.g. for web servers. LVS, ...?

tyan s2510ng

does anyone have good/bad comments about loading Debian on a tyan s2510ng motherboard?

arpwatch and more

can someone tell me how to secure a network so that: the router won't route traffic if the specific mac address isn't registered before hand? it would keep people in line. better, a table with mac addresses and ip(s) (its already there), but have it authenticated so you can't just bring up an ip wi

copyrights liability question

as an ISP where does the line go for how liable we are for client's copyrights violations? Here is my situation, and if you feel this is off topic, you may reply to me at [EMAIL PROTECTED] and we'll keep any further out of this area. But, since this is a ISP area if I have this question someone e

sis900 network cards

are sis900 ethernet cards supported? odd bios setting: settings for mac address are in the bios for the sis900 card. Haven't seen this setting before.

tyan s2510ng motherboards

anyone have experiences using tyan s2510ng or the Silver bookPC using sis900 drivers? y

transparent firewall

Here is the article I found. It answers my questions very nicely. I'd like to see this combined with fipra or instructions comparing them. Linux Journal Home > Articles > Miscellaneous #41 Wednesday, March 14, 2001 | Last Updated 02:51pm Database Solutions since 1979

voip textmode app

can someone recommend a voip program I can use in Linux from the command line? e.g. voicecall ip and it brings up textmode app to talk over the line I'm blind and don't want to mess with windows or X.

I have sen some but

I have had several iterations of hardware being recycled thru a life cycle lately and am coming to a concolusion that I'd like an opinion on usin old hardware in the following fashion. old hardware like 200mhz or even 100mhz pentium systems with 1`28mb ram: promise cards so 80gb drives work then

in.telnetd

what packages contain telnetd? I see xinetd package for loading it but where is the basic telnetd just loaded 2.2r2/i386 on a system but telnet isn't answering and i'm remote now. I need to tell the onsite person what to do to get telnetd running e.g. apt-get ... ... ... or ftp ... then install t

not to start a firestorm but

Can someone point me to a good place to find out quality of international connectivity for a provider. Specifically commcast. they have offered us a very attractive connectivity offer and my only concern is if my international clients will see drastic drop in connectivity quality. We are currently

bridging firewall capacities

Does the linux kernel use dual processors for network coding such as for a briding firewall system whith ipchains rules running on it--e.g. using the ipchains bridge patches. I want to build a briding firewall but don't want it to stop dropping packets so, for example dual 1G intel system with 1G

off site assistance

Hi: I am blind and work in a small data center. Since I can't read screens I need to get sighted people to read for me. I know what I'm doing on the systems but need readers to tell me whats happening. I'm looking for suggested hardware to allow me to easily in realtime send the screen images from

dot files for wu-ftpd

OK maybe off topic but I don't want to get back on the wu-ftpd list to find this easy one. how do I make dot files visible in wu-ftpd? thanks.

files systems size limit

suggestions for files system that will allow larger than 1tb using sofrware linear raid wold be appreciated.

fv24 motherboard and firewire drives

anyone know shat support is available for using primary system drive on firewire

control break on sun box

Hi: I want to set up a terminal server using a LInux box, so I can get console access to Sun systems. I want to eliminate the problem of when a system is power cycled it sends out "noise" or control-break signals over the serial port. How do I make sure the Sun boxes won't get control breaks durin

intrusion detection

Which particular hack regularly creates a user called r and another called re on a system? Where can I get the scripts, and I'll figure out whats needed to make them stop. thanks.

bean counters

Hi: Is there anyone outthere selling a Debian based box that will: allow complete real time ip stats for several inside hosts. e.g. one linux box where all the data goes thru and it presents me with incoming and outgoing traffic use by bytes for each ip? I don't want it to filter packets, reroute p

hardware recommendations

This is probably off topic, if so please ignore me I won't repost. I'm looking where to buy the reset switches that come on new computers. I need to get several, and haven't found out where to purchase them. Radio shack has strange looking ones not normal. Thanks. y -- To UNSUBSCRIBE, email t

commercial offerings anyone

Hello: Does anyone have Debian based commercial ofrerings of this kind: 1. Terminal server for connecting one box to many serial devices such as routers, switches, other terminal servers for serial connectivity when network is down. Cheap dial in box for single line use. Also,

references

Hi: can someone point me at correct refrences for a client to use internal ips and dynamic dns with portfowarding to alolw him to ssh into his boxes inside the home shared server doing msq? e.g. he can use all the internal ip(s) he wants and with the use of dynamic dns updates access each interna

hardware scsi raid recommendation

I'm trying to build a system with hardware SCSI raid, any suggestions welcome. Its a simple system with 2 drives. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

fiber

Can someone comment here on reasons to use fiber for network cable now instead of old style standard cat5 cable? I see lots of fiber equipment out there but 100mbps is 100mbps right? Is fiber economical when you get into over 100mbps situations? thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTE

motherboard recommendations

anyone who can recommend a good motherboard for small to medium sized web server would be greatly appreciated. I'd like to get boards that have onboard integraed LAN and video. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

dfme network driver

Hi: does anyone know if the dfme network driver is available during a debian 2.2 install? If so, dos it show up on the list of cards, and which hardare set should I get for the following items: I'll use a machine with udma66 drives, and the dfme network onboard. under RH Ihave to use insmod after

onsite web cam

Hi: I'd like to put up a web cam to that clients can see their equipment. I had done some messing around a while back pointing the camera at the screen and clients could read it mostly. Also good. but, what I need is to know if anyone can recommend a USB based web cam that works on a LInux box.

proc/sys/net/tcp settings

Can someone point me at good docs for the /proc/sys/net/tcp files? I want to find ways of making syn floods go away. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

syslogd reference

Hi: I'm looking for a reference on setting up remote syslog operations. I wont to send syslog info from a Cisco 7206 to a linux logger. I sort of get ohw to use the -r and hosts list to make the daemon listen, but hwo to set up the other end is my problem any references for system to system or rou

never ind I found it

thanks if someone is about to answer about syslogd I found it kern.* @hostanme add entry to services and use -r option. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

cisco 2924-xl vs 3524-xl

would someone give me a brief run donw on the difference bwtween Cisco Catalyst 2924-xl and 3524-xl thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

ping of death attacks

Yes, I should find this elsewhere, but for speed's sake I'll ask here anyway. Is Linux Debian or other vulnerable to "ping of death" DOS attacks? Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

wml mime for apache

Hi: I have a user wanting to use .wml files for "wap" gateway. I know nothing! Can someone send me the mime-type entry I should put in for this type of file? Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

strange msgs

Hi: with kernel 2.2.14 and varying hardware I have seen messages on boot like this: neighbor table overflow neighbor table overflow and when trying to manually configure the ethernet interface which is using eepro100 module no buffer space available can't ping self in this condition. anybody know

transparent accounting system

I'm looking for any new info on instructions on how to set up a transparent ip accounting system. e.g. sits between rouer or anything and a pile of servers and just counts everything. and will tkae 100mbps traffic reliablly. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsu

screen blanking

How do I stop the screen from blanking on non X systems so that when problem arise the last items are left on screen? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

screen blanking tanks

Thanks to all who replied to this easy question. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

kinda off topic but

Hi: For those who understand tcp intercept on Cisco IOS 12 and up: Can I set up mroe than one access list for example: access-list 120 permit any 207.17.130.5 permit any 207.17.130.6 then set the mins and max's' valuese just for that list and then set up access-list 121 permit any 208.242.120.5

hardware recommendations

What non-intel hardware would anyone recommend for the following applications. the major decision factor is stability the box never dies. firewall/transproxy box that sits in front of several front end boxes which each mount data directories and serve the pages via httpd. This box will act as lo

motherboard comments

Using Debian does anyone have experience using the supermicro 370dle or supermicro 370dl3 mtoherboard? the supermicro 370dl3 has dual fcpga intel sockets, scsi u160 controller, lan, video, ... onboard. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Cont

using 2.2. kenrel whats this indicate

can someone tell me what the following message in console log indicates IP_MASQ:reverse ICMP: failed checksum from 207.208.37.15! IP_MASQ:reverse ICMP: failed checksum from 207.208.37.15! IP_MASQ:reverse ICMP: failed checksum from 207.208.37.15! IP_MASQ:reverse ICMP: failed checksum from 207.208.

named anonymous ftp

is there a way to have name-anonymous-ftp one client reports he can't seem to get proftpd or wu-ftpd to allow users to do anonymous ftp areas by name, but it works if they each have separate IP(s). Seems like a really stupid reason to need lots of ip(s). -- To UNSUBSCRIBE, email to [EMAIL PRO

smbmount from freebsd to debian

how do I use smbmount from a freebsd machine to debian box? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

supermicro 370der motherboards

Has anyone used a supermicro 370der motherboard with Debian 2.2? If so, how was the dual NIC on it for use as firewall. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

wireless lan support

Anyone have suggested hardeware for the following situation colo facility on one side of street accountant on other side of street accountant uses win95 and won't be changing soon colo facility can use what we like we don't really want to use dial in, any wireless suggestions? -- To UNSUBSCR

probably need consulting listserv but ...

Would anyone quote me a price on configuring fipra on a box? I'd provide hardware of course. And if possible make it remotely do able, or send box back and forth. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

intel 815 lan drivers

do the eepro100 drivers work for the intel 815 motherboard? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

ipchains or iptables either way

Can I do the following and is there a nice script to generate the firewall rules for it? for interface eth0: assign ip and run dns service on it only. disallow all else accept ssh from particular source. for eth0:1 ... n: assigne separate ip and run httpd, and afew others on it. b

  1   2   >