Package: transcriber
Version: 1.4.6-4
Severity: wishlist
transcriber is very useful software, and helps transcription of all
kind of materials a lot. Yet, some people speak faster than I am able to
type, and I have seen proprietary software that can make such
transcriptions much easier by reducin
Hi Jurij,
making sure I've only got one set of audio modules loaded unfortunately
doesn't change much - I used to think I only used OSS, and when I only
load the OSS modules now, 'rec xyz.wav' still freezes the system. When I
load the ALSA modules instead, though, recording works fine - only that
Hi David,
On Mon, Jan 02, 2006 at 09:19:45PM +0100, David Schmitt wrote:
> Hi Florian!
>
> Can you reproduce the problem with a current kernel (testing: 2.6.12,
> unstable: 2.6.14)?
well, things have changed a little bit, but just a bit...
using either kernel, I now get an error message with r
Package: anon-proxy
Version: 00.02.39-7
Severity: grave
when using debconf to change the 'anon-proxy/environment' variable, or
when uninstalling anon-proxy and purging the configuration files,
anon-proxy's additions to /etc/environment are not removed.
In addition, the lines anon-proxy adds to /e
on my first installation of anon-proxy, which was also 00.02.39-5 I got
the same error, which I think had to do with the spaces trailing lines
with backslashes in /etc/init.d/anon-proxy. This problem was fixed in
00.02.39-6 (bug #307629)
note that in the initial bug report, the apt-get transcript
I tried the updated driver from unstable today, and it works! Bug
squished, thanks a lot!
Florian
On Tue, Mar 15, 2005 at 08:48:28PM +0100, Mattia Dongili wrote:
> Hello,
> On Thu, Mar 10, 2005 at 11:18:36PM +0100, Florian Schlichting wrote:
> [...]
> > I suppose that's wh
users and groups
ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries an
ii libpcre35.0-1.1 Perl 5 Compatible Regular Expressi
ii logrotate 3.7-5Log rotation utility
-- no debconf information
--
__
/ _|___
| |_/ _
Hi Roland,
> > I'd love to be able to toggle privoxy's use of TOR (via socks) vs.
> > direct internet connection as easily as toggling the filtering of
> > privoxy.
> >
> > Rationale: I'm very fond of privoxy's filtering capabilities, and would
> > like to use them all the time. In addition, I ha
Hi Philipp,
I got what on first sight looks like the same problem (galeon not
starting up, the suggested command returning said errors), although I
haven't compared the output of Loic's further inquiries. What solved the
problem for me was the following command:
gconftool-2 --install-schema-file=
thanks for following up on this.
On Wed, Sep 14, 2005 at 09:52:32PM +0200, Sjoerd Simons wrote:
> On Thu, Nov 04, 2004 at 01:08:37AM +0000, Florian Schlichting wrote:
> > Package: gnome-media
> > Version: 2.6.2-1
> > Followup-For: Bug #274924
> >
> > my laptop
Package: rhythmbox
Version: 0.8.8-13
Severity: important
rhythmbox crashes while importing my (rather large) collection of songs.
In ~/.xsession-errors there are a large number of these messages:
(rhythmbox:8739): GLib-GObject-WARNING **: gvalue.c:89: cannot initialize
GValue with type `gchararr
Package: gqview
Version: 2.0.1-1
Severity: important
gqview segfaults on displaying the attached logo1.jpg file (which was
created with the Gimp and is fine to display in eg Galeon or
Openoffice.org):
[EMAIL PROTECTED]:~$ gqview logo1.jpg
Segmentation fault
It does the same when trying to displ
this all I need to do?). Result stayed
the same over two runs.
Florian
--
__
/ _|___
| |_/ __| Florian Schlichting __O
| _\__ \ +86 (0)10 84070216 h _-\<,_
|_| |___/ +86 (0)13521877533 m (_)/ (_)
signature.asc
Description: Digital signature
ok, gstreamer from unstable:
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ NameVersionDescription
+++-==
Package: wnpp
Severity: wishlist
I particularly liked the idea of looking at a network map...
* Package name: Vidalia
Version : 0.0.10
Upstream Author : Matt Edman <[EMAIL PROTECTED]>,
Justin Hipple <[EMAIL PROTECTED]>
see http://trac.vidali
Package: typo3-site-installer
Version: 0.94+debian-1
Severity: wishlist
'/usr/sbin/typo3-site-installer -h' lists 10 different options. Its
manpage documents just 3 of these.
It would be nice if the manpage was updated.
Florian
-- System Information:
Debian Release: 4.0
APT prefers unstable
Package: typo3-site-installer
Version: 0.94+debian-1
Severity: normal
typo3-src (4.0.2+debian-1) removed the 'latest' link:
* Removed the creation of "latest"-link; typo3-dummy has hardcoded sourcedir
but typo3-site-installer still expects this link and will quit with an
error unless the link
Package: typo3
Version: 4.0.2+debian-1
Severity: wishlist
/usr/share/doc/typo3/README.Debian.gz contains an excellent walk-through
of the things one needs to do to get a working typo3 setup.
But since the testsite and quickstart packages are no longer being
provided, a hint how to get them and ge
Hi,
same problem here; it used to look like this:
Oct 31 02:35:21 localhost fetchmail[3881]: starting fetchmail 6.3.4 daemon
Oct 31 02:35:21 localhost fetchmail[3881]: couldn't find canonical DNS name of
pop.gmx.net (pop.gmx.net)
Oct 31 02:35:22 localhost fetchmail[3881]: Query status=11 (DNS)
O
Package: tipa
Version: 2:1.3-4
Severity: minor
the tipa package description says: "Type 1 fonts for TIPA are also
included in this package (to make them available in X11, please install
the xfonts-tipa package)."
Since actually viewing the results of one's typesetting is often an
essential step,
On Sun, Jan 07, 2007 at 08:45:39PM +0100, Rafael Laboissiere wrote:
> * Florian Schlichting <[EMAIL PROTECTED]> [2007-01-07 13:36]:
>
> > Package: tipa
> > Version: 2:1.3-4
> > Severity: minor
> >
> > the tipa package description says: "Type 1 fonts
Package: llgal
Version: 0.13.8-1
Severity: normal
when using llgal to recourse through subdirectories, creation of
thumbnails fails in some directories with the following output:
Entering subdirectory 'Auf nach Leipzig'...
Listing entries in . : 100.00%
Preparing entries: 100.00%
!! Failed
Package: llgal
Version: 0.13.8-1
Severity: normal
--php, or rather: www_extension = "php", in conjunction with recoursing
subdirectories, seems to produce a chaotic mix of .php and .html files:
[EMAIL PROTECTED]:~/tmp/website$ ls -R
.:
AG_SamstagEmpfang_Rathaus slide_1.php slide_3.php
A
On Thu, Nov 16, 2006 at 02:12:25PM +0100, Brice Goglin wrote:
> Ok, it makes sense now. llgal reads the system&user llgalrc first, and
> then the local .llgal/llgalrc. But in case of -R, the local
> .llgal/llgalrc file is only taken in account when generating the _local_
> gallery. It means that th
On Wed, Nov 22, 2006 at 01:50:01AM +0100, Matthias Andree wrote:
> Nagy Gabor Peter <[EMAIL PROTECTED]> writes:
>
> > So my impression is that it doesn't ask the DNS when it tries to connect
> > to the servers
>
> AFAICT, fetchmail calls getaddrinfo() each and every time when connecting.
well, p
4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu
ii zlib1g 1:1.2.2-3 compression library - runtime
-- no debconf information
--
__
/ _|___
| |_/ __| Florian Schlichting__O
| _\__ \ mobile: 07904-351682 _-\<,_
|_| |___/
On Mon, Feb 21, 2005 at 12:50:19PM +0000, Florian Schlichting wrote:
> > Package: xfree86-driver-synaptics
> > Version: 0.14.0-1
> > Followup-For: Bug #290308
> >
> > I'm having the same problem as described above. Interestingly, it all
> > worked we
Package: xfree86-driver-synaptics
Version: 0.14.0-1
Followup-For: Bug #290308
I'm having the same problem as described above. Interestingly, it all
worked well until dist-upgrade in testing last Friday morning (18.2.05).
After reboot, X won't start any more unless I uncomment
# Option"R
Package: munin
Severity: normal
updating a stable server from sarge to etch, the amount of CPU munin
uses presumably for graphing has increased 4- or 5-fold. Please see
attached graph (I nice'd the cronjob, all other services run with
normal priority).
While we all know that new software always n
Hi Tore,
thanks for your quick reply.
> It is done by RRDtool. Could you try downgrading librrds-perl to the
> Sarge version, or trying to nice only the munin-graph subprocess, to
> make sure it's the graphing that eats resources? Edit
> /usr/bin/munin-cron to do that.
I can confirm that
Package: plucker-desktop
Version: 1.8-16+b1
Severity: grave
Justification: renders package unusable
since the last update of plucker (1.8-16+b1, a binary NMU by "the buildd"
to rebuild plucker against python2.4), it won't update my channel any
more. Without any error messages, it merely reports su
close 385191 1.8-17
thanks
On Wed, Sep 06, 2006 at 11:29:51PM +0200, Ludovic Rousseau wrote:
> severity 385191 normal
> thanks
>
> Le 29.08.2006, à 19:22:26, Florian Schlichting a écrit:
> > Package: plucker-desktop
> > Version: 1.8-16+b1
> > Severity: grave
>
Package: plucker-desktop
Version: 1.8-16
Severity: normal
man plucker-desktop is a dummy (contains no actual information)
plus, I found that the "tip of the day" contains some information not
necessarily obvious and not available elsewhere, so perhaps include
some/all of it in a README file?
(I
Package: pyrite-publisher
Version: 2.1.1-5.2+b1
Severity: normal
when using the pyrpub GUI, pressing the "Choose..." button for the input
file, nothing happens and the following message is sent to the terminal:
[EMAIL PROTECTED]:~$ pyrpub
Traceback (most recent call last):
File "/var/lib/pytho
Package: chkrootkit
Version: 0.46a-3
Severity: normal
chkrootkit reports a possible Showtee Rootkit infection
[EMAIL PROTECTED]:~$ sudo /usr/sbin/chkrootkit aliens
[...]
Searching for Showtee... Warning: Possible Showtee Rootkit installed
[...]
looking at the script, it tests for (and finds) /us
severity 384358 serious
tags 384358 patch
thanks
xfe.postrm is severely broken, as for all calls except 'postrm purge' it
will return an error, making the package unremovable and causing
aptitude to do nothing but fail with this error.
The following patch is what I THINK is missing (has been acci
0.2.3.4-2.1
> ii libwrap0 7.6.q-24
> ii libyajl2 2.0.4-4
> ii lsb-base 4.1+Debian12
>
> mpd recommends no packages.
>
> Versions of packages mpd suggests:
> ii avahi-daemon 0.6.31-3
> pn icecast2
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libxmlrpc-lite-perl
Version : 0.717
Upstream Author : Paul Kulchenko (paulclin...@yahoo.com)
* URL : https://metacpan.org/release/XMLRPC-Lite
* License : GPL-1+, Artistic
Programming
I found a 2006 discussion of the issues involved on the *gnutls* mailing
list at http://lists.gnutls.org/pipermail/gnutls-devel/2006-January.txt
No idea what has become of this, e.g. if there's a "standard" way for
libraries to coordinate their use of libgcrypt similar to the wrapper
gnutls is sai
Dominik,
did you have a look at the arpwatch package, and are you still planning
to adopt it?
Florian, are you interested in doing so?
I haven't had a look at the packaging yet, but unless any of you two
step forward, I might do so myself.
Florian
--
To UNSUBSCRIBE, email to debian-bugs-dist
Source: loudmouth
Severity: wishlist
Hi,
the company originally behind loudmouth split up / dissolved years ago and
loudmouth-project.org displays crap, but some continuing development can
be found on github, particularly at https://github.com/mcabber/loudmouth
where the people behind MCabber ad
retitle 686996 ITA: arpwatch -- Ethernet/FDDI station activity monitor
owner 686996 !
thanks
On Thu, Jan 02, 2014 at 11:15:32PM +0100, Dominik George wrote:
> I started work on the package some time and found the upstream code to
> be a huge mess. At some point, I gave up because I needed to think
Hi,
A long while ago, Cyril Brulebois wrote:
> > 0xb76fa1b9 in pixman_image_set_has_client_clip (image=0x0, client_clip=1)
> > at ../../pixman/pixman-image.c:530
> > 530 ../../pixman/pixman-image.c: No such file or directory.
> > in ../../pixman/pixman-image.c
> > #0 0xb76fa1b9 in pixman_ima
Hi Arthur, Carlos,
the issue you reportied looks a lot like
https://github.com/the-tcpdump-group/libpcap/issues/333 or
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733747, which was
fixed in libpcap 1.5.3 (uploaded 2014-01-16, in jessie since
2014-01-27).
As I'm unable to reproduce the issue
Hi David,
apologies for the late reply.
> I installed libpoet-perl and am attempting to follow along with the
> example in Poet::Manual::Intro. Creating the application appears to
> have worked:
...
> $ my_app/bin/run.pl
> Running plackup, -E, development, --port, 5000, -R,
> /home/dpchrist/
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libplack-middleware-debug-perl
Version : 0.16
Upstream Author : Marcel Grünauer, Tatsuhiko Miyagawa
* URL : https://metacpan.org/release/Plack-Middleware-Debug
* License : GPL-1
Hi Joey,
thanks for your followup - I was going to say I agree but was unsure how
to make systemd (and possibly other init systems) work with
/etc/default/mpd.
On Sun, Feb 09, 2014 at 02:32:13PM -0400, Joey Hess wrote:
> I ran this by Tollef and our suggestion is that mpd transition away from
> u
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libcookie-baker-perl
Version : 0.02
Upstream Author : Masahiro Nagano
* URL : https://metacpan.org/release/Cookie-Baker
* License : GPL-1+, Artistic
Programming Lang: Perl
Package: lttng-modules-dkms
Version: 2.3.2-1
Severity: important
upon installation of linux 3.12 today, I noticed building lttng-modules
fails with the following build log (from
/var/lib/dkms/lttng-modules/2.3.2/build/make.log):
DKMS make.log for lttng-modules-2.3.2 for kernel 3.12-1-amd64 (x86_6
tags 649732 +moreinfo
thanks
Hi Chris,
sorry if this is the first time somebody actually looks at your bug
report from 2011...
> If behind a firewall and I choose "add url" in mpd, mpd crashes after
> the curl plugin times out. Setting the proxy correctly in mpd.conf
> fixes this. In the log r
tags 619047 +moreinfo
thanks
Hi Timo,
> MPD dies and dumps core when its configured logfiel locations is not
> available (for example when the remote filesystem is not available).
> It should exit without dumping core.
>
> log: problem opening log file "/afs/myserver.tld/service.mpd/music/mpd.log
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libterm-progressbar-simple-perl
Version : 0.03
Upstream Author : Edmund von der Burg
* URL : https://metacpan.org/release/Term-ProgressBar-Simple
* License : GPL-1+, Artistic
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libterm-progressbar-quiet-perl
Version : 0.31
Upstream Author : Leon Brocard, a...@astray.com
* URL : https://metacpan.org/release/Term-ProgressBar-Quiet
* License : GPL-1+, Artistic
I've just run into this problem too, in the sid_s390x-dchroot on
zelenka, same as Thibaut.
I found that a work-around is to allow dumping of a core file, which gdb
will then happily analyse.
Florian
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubs
Hi,
mpd also FTBFS since I enabled the build tests in 0.18 (no regression
here either).
Reinhard asked for a backtrace, this is what I get in the
sid_s390x-dchroot on zelenka:
fsfs@zelenka ~/mpd-0.18.3 % gdb ./test/run_input core
GNU gdb (GDB) 7.6.1 (Debian 7.6.1-1)
Copyright (C) 2013 Free Softw
Hi Joey,
> If mpd's database is already up-to-date, mpc update --wait continues
> waiting long after mpd finishes the quick scan it takes it to
> determine that.
would you mind checking if this is still the case with the versions
currently in unstable? I'm unable to reproduce the issue on my (fai
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libcgi-struct-xs-perl
Version : 1.04
Upstream Author : Dmitry Smal
* URL : https://metacpan.org/release/CGI-Struct-XS
* License : BSD-2-clause
Programming Lang: Perl / XS
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libcpanel-json-xs-perl
Version : 2.3403
Upstream Author : Reini Urban
* URL : https://metacpan.org/release/Cpanel-JSON-XS
* License : same as Perl
Programming Lang: Perl / XS
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libjson-maybexs-perl
Version : 1.00
Upstream Author : Matt S. Trout
* URL : http://search.cpan.org/dist/JSON-MaybeXS/
* License : GPL-1+, Artistic
Programming Lang: Perl
Encryption without separate /boot becomes even more attractive when
using the kernel's EFI stub to boot, directly off the EFI partition. In
that scenario, the passphrase needs to be entered only once.
Florian
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject o
Hi,
> Here's the output of 'systemctl status mpd.service':
>
>mpd.service - Music Player Daemon
> Loaded: loaded (/lib/systemd/system/mpd.service; disabled)
> Active: inactive (dead)
and that's the issue you see: mpd is not configured to start as a system
service on boot ("disabl
Hi,
> >>Here's the output of 'systemctl status mpd.service':
> >>
> >> mpd.service - Music Player Daemon
> >> Loaded: loaded (/lib/systemd/system/mpd.service; disabled)
> >> Active: inactive (dead)
> >
> >and that's the issue you see: mpd is not configured to start as a system
> >servi
Severity 744174 serious
thanks
> What happens is described in the title... I have mpd set to LSB defaults, but
> when an mpd package upgrade gets pulled in, the upgrade disregards current
> settings and mpd's service runlevels are all set to 'stop' causing the mpd
> init
> script to be skipped on
Hi Narcis,
> As you can read at the minutes:
> http://davical.dhits.nl/index.php?title=Community_Support
>
> We propose you to maintain the communication with the Debian team about
> their repositories with DAViCal.
up to now, there is no "Debian team" around DAViCal except for Andrew,
who is a
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libmce-perl
Version : 1.510
Upstream Author : Mario E. Roy
* URL : https://metacpan.org/release/MCE
* License : GPL-1+, Artistic
Programming Lang: Perl
Description : Many-Core
Package: wnpp
Owner: Florian Schlichting
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org
* Package name: libplack-middleware-fixmissingbodyinredirect-perl
Version : 0.09
Upstream Author : Upasana
* URL :
https
Package: wnpp
Owner: Florian Schlichting
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org
* Package name: libplack-middleware-methodoverride-perl
Version : 0.10
Upstream Author : David E. Wheeler
* URL : https://metacpan.org
Package: wnpp
Owner: Florian Schlichting
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org
* Package name: libplack-middleware-removeredundantbody-perl
Version : 0.03
Upstream Author : Upasana
* URL :
https://metacpan.org
severity 735648 important
tags 735648 - patch
tags 735648 + unreproducible
thanks
Hi,
I'm downgrading this bug as I'm unable to reproduce it (doesn't affect
everybody, does not make package unuseable as such) and I think it's
unclear that this is actually a bug in x11vnc, rather than in one of t
Package: wnpp
Owner: Florian Schlichting
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org
* Package name: libdigest-perl-md5-perl
Version : 1.9
Upstream Author : Christian Lackas
* URL : https://metacpan.org/release/Digest
Package: wnpp
Owner: Florian Schlichting
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org
* Package name: libextutils-makemaker-cpanfile-perl
Version : 0.06
Upstream Author : Kenichi Ishigaki
* URL : https://metacpan.org
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libperlio-utf8-strict-perl
Version : 0.004
Upstream Author : Leon Timmermans , Christian Hansen
* URL : https://metacpan.org/release/PerlIO-utf8_strict
* License : GPL-1+, Artistic
Dear Markus Kuhn,
I'm in the process of packaging PerlIO::utf8_strict for Debian. The
module includes in its CPAN distribution a 2010 copy of the file
quickbrown.txt, very similar to the one you make available at
http://www.cl.cam.ac.uk/~mgk25/ucs/examples/quickbrown.txt. This file
contains your n
On Fri, Feb 28, 2014 at 09:51:31AM +, Markus Kuhn wrote:
> I would be happy to release any copyright that I might share in this
> file under e.g. a Creative Commons Attribution licence, but I
> am not confident that Creative Commons is suitable for a compilation
> of samples. I am not even sure
Hi Christian,
> do you want to extend mpd that you can start multiple instances?
>
> Three years ago I submitted a patch for the wish of Jerome Haltom
> (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=526420) to
> support multiple instances. The patch works but there is still room
> for improv
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libposix-strftime-compiler-perl
Version : 0.31
Upstream Author : Masahiro Nagano
* URL : https://metacpan.org/release/POSIX-strftime-Compiler
* License : GPL-1+, Artistic
On Tue, Sep 24, 2013 at 09:01:37PM +0400, Max V. Stotsky wrote:
> The simplest way to reproduce the problem:
>
> % ls
> test.tt
> % cat test.tt
>
> [% c.loc("first") %]
> [% c.l("second") %]
> [% l("third") %]
> [% loc("fourth") %]
>
> % xgettext.pl --directory=.
> % ls
> messages.po test.tt
>
The errors in libpoe-component-client-mpd-perl look very similar to
those in libaudio-mpd-perl; I tried to build the latter with different
version of mpd, and it turns out that the build succeeds with mpd 0.17.6
(last in the 0.17.x series) and fails with 0.18. There were a number of
protocol change
> Please remove davical from sid.
While I agree that Davical in Debian is not in a good state at all, I
notice that the upstream project is in the process of converting itself
from a one man (same as Debian maintainer) show to a more
community-based project, and updating the Debian packages is one
Hi Nicolas,
> I recently decided to try systemd instead of sysvinit.
> Since this switch mpd does not start when the computer starts anymore.
are there any (error) messages? What is the output of 'systemctl status
mpd.service'? Do you find anything mpd-related in your syslog / systemd
journal, or
On Fri, Apr 25, 2014 at 12:10:04PM -0400, Daniel Kahn Gillmor wrote:
> On 04/24/2014 06:09 PM, Florian Schlichting wrote:
> > Digest::Perl::MD5s has the same interface as the much faster Digest::MD5,
> > but
> > unlike that, it is not an interface but a Perl implementation
reassign 742498 wnpp
retitle 742498 ITA: davical -- The DAViCal CalDAV & CardDAV Server
owner 742498 !
thanks
Things are progressing and work has started on providing a fixed package
once a new upstream release has been made; I'm setting myself as the
owner until an appropriate team mailing list h
Package: mairix
Version: 0.22-1
Severity: wishlist
While http://www.rpcurnow.force9.co.uk/mairix/ has not been updated,
the author of mairix seems to have moved development to github at
https://github.com/rc0/mairix, where a new release (0.23) has been
tagged, bugs and patches can be forwarded in
tags 741790 + confirmed fixed-upstream
thanks
On Sun, Mar 16, 2014 at 01:43:24PM +0100, David Suárez wrote:
> Source: gimmix
> Version: 0.5.7.1-4
> Severity: serious
> Tags: jessie sid
> User: debian...@lists.debian.org
> Usertags: qa-ftbfs-20140315 qa-ftbfs
> Justification: FTBFS on amd64
> > gc
Control: reassign 631729 libloudmouth1-0
Control: retitle 631729 libloudmouth1-0: segfaults when connecting to a
dual-stacked host
Control: tags 631729 = ipv6
I am able to reproduce this now, both on i386 and amd64. The key is to
connect to a hostname that resolves to both an IPv4 and an IPv6 add
> As this only happens for me when connecting to a host that resolves to
> both ipv4 and ipv6 (for irssi-plugin-xmpp that is: '/xmppconnect -h
> localhost ', NOT '/xmppconnect -h 127.0.0.1 '), I suppose the
> GIO watch is triggered once for each protocol version. This may either
> be a bug in glib,
Hi Adalbert,
thanks for providing debug output, and sorry for not getting back to you
for such a long time.
> With 0.5.3r512-1, the log halts after the line "got delete for old
> connection, ignoring.." for about 30 seconds. Then the process dies
> saying "vpnc: no response from target".
>
> Wit
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libinline-files-perl
Version : 0.68
Upstream Author : Damian Conway , Alberto Simoes
* URL : http://search.cpan.org/~ambs/Inline-Files-0.68/
* License : GPL-1
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libtest-data-perl
Version : 1.22
Upstream Author : brian d foy,
* URL : http://search.cpan.org/~bdfoy/Test-Data-1.22/
* License : GPL-1+, Artistic
Programming Lang: Perl
Package: wnpp
Severity: wishlist
Owner: Florian Schlichting
* Package name: libnumber-bytes-human-perl
Version : 0.07
Upstream Author : Adriano R. Ferreira,
* URL : http://search.cpan.org/~ferreira/Number-Bytes-Human-0.07/
* License : GPL-1+, Artistic
reassign 649066 libmason-perl
forwarded 649066 https://rt.cpan.org/Public/Bug/Display.html?id=72497
thanks
> Unpacking mason (from .../mason_1.0.0-12.2_all.deb) ...
> dpkg: error processing /var/cache/apt/archives/mason_1.0.0-12.2_all.deb
> (--unpack):
> trying to overwrite '/usr/bin/mason', whi
> > > > - startx
> > > > - when lxde has started, klick on the lxterminal icon on lxpanel
> > > > - X segfaults
> > > >
> > > > This happens reliably, at any time during the session. I can start
> > > > other applications (xterm, firefox, ...) normally, whether via the
> > > > panel or the menu or
David, Antonio, Eric:
On Sat, Sep 10, 2011 at 09:45:17AM +0100, David Woodhouse wrote:
> On Sat, 2011-09-10 at 15:52 +0800, Antonio Borneo wrote:
> >
> > In the fix you provide,
> > 1) you add ";s/ipid 0x//g" at the end of string.
> >This does not impact backward compatibility. I'm in fav
On Wed, Nov 23, 2011 at 10:34:40PM +, David Woodhouse wrote:
> Note: That "fuzz" you speak of when applying the patch... that's due to
> the rest of the fixes to vpnc-script since it was imported into its own
> git repo, surely?
yes, the line numbers don't match - there are another 23 lines in
Hi Guido,
could you please test the attached patch for
/etc/NetworkManager/dispatcher.d/01ifupdown (taken from #475188 and
refreshed for current wheezy) and see if it solves your remaining
problems with NetworkManager, ifupdown and mountnfs?
Andrew:
could you please comment on Michael's questio
Hi,
On Fri, Sep 07, 2012 at 12:39:09PM -0400, Jon wrote:
> Package: irssi-plugin-xmpp
> Version: 0.52-1
> Severity: normal
>
> If you remove someone from a MUC by forcing their affiliation to outcast
> (or just to none for a channel that uses a whitelist) they don't show up
> as leaving the chann
reassign 499229 irssi-plugin-otr 0.3-2
thanks
I've been looking at this bug on several occasions, without fully
understanding why it ended up being assigned to irssi-plugin-xmpp in the
first place. My feeling today is that otr somehow messes with the ssl
encryption set up by xmpp / libloudmouth, s
severity 626897 important
severity 687059 important
thanks
I'm raising the severity of these bugs to "important", as in the
maintainer's opinion (as discussed on #debian-perl), while not making
these packages outright unuseable and thus RC-buggy, these issues can be
highly annoying, filling logs a
2012-11-04 21:30:25.0
+0100
@@ -1,3 +1,11 @@
+libnet-xmpp-perl (1.02-3) unstable; urgency=low
+
+ * Team upload.
+ * Add 626897_check-definedness-of-hash-key-before-use.patch to silence an
+irritating warning in current versions of Perl (closes: #626897).
+
+ -- Florian Schlichting
(1.23-2) unstable; urgency=low
+
+ * Team upload.
+ * Add 687059_Use-of-uninitialized-value.patch (closes: #687059).
+
+ -- Florian Schlichting Sun, 04 Nov 2012
22:10:09 +0100
+
libxml-stream-perl (1.23-1) unstable; urgency=low
* New upstream release
diff -u libxml-stream-perl-1.23/debian
1 - 100 of 597 matches
Mail list logo
