Package: sane-utils
Version: 1.0.15-8
Severity: normal
I have two different webcams, a Logitech Quickcam USB and a Philips 740 webcam.
When I connect them one at a time, scanimage -l reports them correctly:
scanimage -L
device `v4l:/dev/video0' is a Noname Logitech QuickCam USB virtual device
sc
Package: capi4hylafax
Version: 1:01.02.03-11
Severity: minor
README.Debian talks about changing /var/spool/hylafax/etc/config.faxCAPI, which
does not exist.
invoking capi4hylafaxconfig defaults to /var/spool/hylafax/config.faxCAPI,
which also does not exist.
/etc/hylafax/config.faxCAPI is the c
Package: capiutils
Version: 1:3.6.2005-01-03-5
Severity: minor
SYNOPSIS does not mention a filename to be required. So first I assumed
stdin as source which didn't work. Appending a filename as the last argument
following the phone number worked. This is contrary to the following line
in the DESC
Package: capi4hylafax
Version: 1:01.02.03-11
Severity: minor
There are no manual pages available for the two core binaries in the
capi4hylafax package, c2faxsend and c2faxrecv.
Please see Debian Policy Manual 12.1.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
A
Package: capi4hylafax
Version: 1:01.02.03-11
Severity: serious
Justification: Policy 10.7.2
c2faxsend causes the following error message:
Can't open config file "/var/spool/hylafax/etc/config.faxCAPI".
Use default values.
c2faxsend expects to find the configuration file in "/var/spool/hylafax/e
Package: lshw
Version: 02.03-2
Severity: normal
The output of lshw includes the section pasted below, in which the frequency
and presumably the depth is reported incorrectly.
Modeline and DefaultDepth setting in my XF86Config-4 set the graphics card
to a vertical refresh rate of 90Hz and 24bit c
Package: xfe
Version: 0.66-6
Severity: critical
Justification: causes serious data loss
Assume a file on a mounted vfat partition, called "test". Trying to change
it's name to "Test" will diplay a warning box:
File /mnt/data/Test already exists. Overwrite?
Upon confirmation with the "Yes" but
Package: xfe
Version: 0.66-6
Severity: normal
xfe in "Tree and one panel" mode.
The left panel showing the tree view is sometimes not updated after a new
folder has been created on the right panel. The update button doesn't help.
This behaviour can not always be reproduced.
-- System Informatio
Package: xfe
Version: 0.66-6
Severity: important
When copying a file with the context menu's "Copy" and "Paste" functions,
the date and time of the original file is lost and replaced with the date
and time at which copying took place.
-- System Information:
Debian Release: 3.1
APT prefers tes
Package: gpsd
Version: 2.13-1
Severity: normal
I use a Garmin eTrex Venture (firmware 2.70, serial data format set to:
NEMA In/NEMA Out, 4800 baud fixed) with gpsd.
After connecting the GPS to to the serial port I start gpsd as follows:
gpsd -p /dev/ttyS0 -T n -n -D2
Out of 40 consecutive co
Package: capi4hylafax
Version: 1:01.02.03-7
Severity: normal
capi4hylafaxconfig changes /var/spool/hylafax/etc/config.faxCAPI, which is a
real file, and seems to be the one actually used by hylafax.
faxsetup run afterwards will copy whatever was setup in
/etc/hylafax/config.faxCAPI to /var/spoo
Package: unison
Version: 2.9.1-2sarge2
Severity: normal
I use unison with the option '-fastcheck true' to synchronize two local
vfat partitions, each filled with about 60GB of data. Comparison takes
around 3:30 hours while the actual copy/delete is done within a few minutes.
It seems that unison
Package: xserver-xorg-core
Version: 2:1.1.1-18
Severity: normal
The packages xserver-xorg and xserver-xorg-core have circular dependencies:
xserver-xorg depends on xserver-xorg-core
xserver-xorg-core depends on xserver-xorg
I believe that xserver-xorg-core should not depend on xserver-xorg.
Re
Package: man2html
Version: 1.6c-3
Severity: normal
When viewing the terminfo(5) manual page with a web browser like firefox
or dillo, the text following the line "These are the boolean
capabilities:" is unreadable. Some text parts are missing and the rest
is formatted incorrectly. When viewing it
Package: dselect
Version: 1.13.21
Severity: normal
dselect freezes upon pressing CTRL+S. It doesn't respond to keyboard
commands any more and needs to be killed with kill -9.
This is particularly annoying since in Midnight Commander, CTRL-S is the
search shortcut to jump to a certain file, which
I have the same problem. ifonfig shows eth0 up and running but address
resolution fails.
The problem exists with linux-image-3.2.0-4-amd64_3.2.57-3, downgrading to
linux-image-2.6.32-5-amd64_2.6.32-48squeeze4 solves the issue.
ping 192.168.115.1
PING 192.168.115.1 (192.168.115.1) 56(84) bytes of
Jörg,
disabling the v4l backend did not fix the bug, obviously. I am therefore
reopening it.
The removal of the v4l backend breaks image capture for all v4l sources, not
just pwc. You should therefore document this with a separate Debian bug report.
I know nothing about the mismatch between th
Package: poc-streamer
Version: 0.4.2-3
Severity: normal
Dear Maintainer,
mp3cut makes the output file executable. I think it should not do so.
Here is a simple example:
> test.mp3 && mp3cut test.pm3
Writing to test.out.pm3
open: No such file or directory
Could not open mp3 file: test.pm3
ls -gG
Please reopen the bug.
- Release 1.0.19~cvs20070730-1 is unsupported
-> The bug still exists with sane-utils 1.0.22-7.4 from wheezy (stable).
- no answer for more then 12 weeks
-> Not true. You specifically asked for testing which I cannot check, and which
I did report back to you.
This bug is
I stumbled across this when trying to backup to an encrypted USB 2.0 HDD.
The device would unlock and mount fine (mount reports rw), but any attempt
to modify or copy files to it caused an 'no space left on device' error,
while 'df -h' reported > 10GB free space.
'dd' to the raw device does not c
The same bug still exists with sane-utils 1.0.24-8:
scanimage -L
device `v4l:/dev/video1' is a Noname Philips 740 webcam virtual device
device `v4l:/dev/video0' is a Noname Terratec Cinergy HT PCI virtual device
scanimage -d v4l:/dev/video1 > image.pnm
scanimage: sane_start: Invalid argument
SAN
pwc is still not working with sane-utils_1.0.24-13.
scanimage -L does not find the v4l device as it used to.
It also complains about a lot of other things.
See attached output of 'scanimage -L'
MIB search path:
/root/.snmp/mibs:/usr/share/snmp/mibs:/usr/share/snmp/mibs/iana:/usr/share/snmp/mibs/ie
Package: acpid
Version: 1.0.4-7.1
Severity: normal
The changelog reports removal of the powerbutton scripts. However, upon
upgrading
acpid from 1.0.4-5 to 1.0.4-7.1 these scripts are not removed from the system.
The changelog also reports that the powerbutton scripts were contained in other
pac
Package: sane-utils
Version: 1.0.19~cvs20070730-1
Severity: normal
scanimage fails to capture an image from a video stream provided by the kernel
module 'pwc' for Philips web cams. However, I can watch the camera's video
stream
with xawtv.
scanimage works as expected with the other video sources
I would like to do some more testing but how can I tell v4l and v4l2
devices apart?
The devices I already mentioned are the only ones I have available at
the moment.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
xcam also fails to display or capture any image from the Philips
webcam. Upon pressing the 'Play' button, an error message box pops up:
"Failed to start webcam: Invalid argument"
After jumping between the other available devices, upon selecting the
webcam (pwc) device, xcam terminates immediately:
I have tried with 640x480 and 352x288, resulting in exactly the same problems.
On Mon, 15 Oct 2007 14:25:23 +0200
Julien BLACHE <[EMAIL PROTECTED]> wrote:
>
> Can you try to grab a 640 x 480 image ?
>
> JB.
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Tro
Package: easytag
Version: 2.1.4-1
Severity: normal
The icon specified in the menu file is not part of the easytag package:
$ cat /usr/share/menu/easytag | grep icon
icon="/usr/share/pixmaps/easytag.xpm"
$ dpkg -L easytag | grep .xpm
/usr/share/pixmaps/EasyTAG_icon.xpm
/usr/share/easytag
Please close this bug as it has been fixed.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Wed, 23 Apr 2008 13:31:24 +0200
Andreas Hartmann <[EMAIL PROTECTED]> wrote:
> Please close this bug as it has been fixed.
Sorry for my last post, got mixed up with the bug number.
This bug still exists.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubsc
I just stumbled across this bug on my system, here is what
happened on my system:
# ls -l /usr/share/misc pci.ids*
-rw-r--r-- 1 root root 511686 2008-02-20 10:20 pci.ids
# update-pciids
# ls -l /usr/share/misc pci.ids*
-rw-r--r-- 1 root root 514201 2008-03-09 17:58 pci.ids.gz
-rw-r--r-- 1 root roo
Package: geda-gschem
Version: 1:1.0.1.20070626-1
Severity: normal
gschem doesn't have a menu file for the Debian menu system, so I made one:
cat /usr/share/menu/geda-gschem
?package(geda-gschem):needs="x11" \
section="Apps/Technical" \
title="gschem" \
longtitle="gEDA Schematic Capture" \
Package: scantv
Version: 3.95.dfsg.1-4
Severity: important
The following command causes scantv to crash at the end of the scan:
scantv -n pal -f europe-west -c /dev/video1 -C /dev/vbi1
...
68 (847.25 MHz): no station
69 (855.25 MHz): no station
*** glibc detected *** scantv: free(): invalid
Package: fmtools
Version: 1.0.3
Severity: normal
According to the man page, the command 'fm 88.4 100' should tune to 88.4 MHz
and turn up the volume to 100%. While the frequency tuning works as expected,
the volume is set to an inaudible value:
fm 88.4 100
Radio tuned to 88.40 MHz at 0.15% volum
Package: gbrainy
Version: 0.3-1
Severity: normal
The game "Circles in a rectangle" asks the following question:
"What is the maximum number of circles that can be fit in the square below?"
The circles in question have a diameter of 1 unit and the box is a square of
5 units. The answer that gbrai
Package: gltron
Version: 0.70final-8
Severity: important
Selecting "GAME" in the startup screen works fine. Then, upon selecting
"START GAME", gltron crashes. I can very briefly see that the window content
chages before the crash. Here is what gltron reports on the console:
~$ gltron
[status] l
Package: gqcam
Version: 0.9.1-4
Severity: normal
The menu file /usr/share/menu/gqcam specifies:
icon="camera"
But there is no such file in the default location at /usr/share/pixmaps,
and the gqview package doesn't contain any icon file. The "icon" entry in
/usr/share/menu/gqcam should be removed
Package: fvwm
Version: 1:2.5.21-1+b1
Severity: normal
Some menu files in /usr/share/menu specify icons without giving their full path.
Apparently, /usr/share/pixmaps is the default location for these icon files.
fvwm fails to find them and floods ~./xsession-errors with messages:
[FVWM][scanForP
Package: foobillard
Version: 3.0a-2
Severity: normal
Just starting foobillard writes almost 40k of messages to ~/.xsession-errors.
The messages report usage info, startup options, ball positions, vertices
and so on, it almost seems as if a complete debug log is written to the
xsession error file.
Upstream author reports that bug is fixed:
Begin forwarded message:
Date: Mon, 05 Nov 2007 21:45:50 +0100
From: Jordi Mas <[EMAIL PROTECTED]>
To: Andreas Hartmann <[EMAIL PROTECTED]>
Subject: Re: [Fwd: [gbrainy] Fwd: Bug#449062: game: "Circles in a rectangle"
has wrong an
Package: gxine
Version: 0.5.4-0.1
Severity: normal
I have been trying to setup gxine to work with my remote control.
Eventually I found out that a customized lircrc file is required.
According to http://www.xinehq.de/index.php/readme,
xine --keymap=lirc
may be used to generate a lircrc templ
I had played around a bit with the supplied sample lircrc and got the
impression that it didn't show all possible commands. So I was looking
for a more comprehensive one and came across the --keymap option of
xine-ui. Would it be possible to make --keymap=lirc for gxine show all
possible commands?
Package: gnome-games
Version: 1:2.28.1-1
Severity: critical
Justification: breaks the whole system
Upon starting Gnome Solitaire Games, a window frame very briefly appears and
then immediately terminates. Initially, it appears as if just the application
has terminated. But after that, no other pro
Same issue with Debian stock kernel 2.6.30-2-686.
My graphics card is ATI RV280 based, driver is xserver-xorg-video-ati
1:6.12.3-1.
The problem is reproduceable, starting /usr/games/sol causes the system to
become
completely unusable every time. However, besides the segmentation faults, I
also g
I just noticed that glTron (/usr/games/gltron, package gltron) causes the same
problem. The game itself was running fine, the problem occured just after
ending it. Also, applications already running (e.g. Midnight Commander,
Iceweasel) continue to work as usual. Only newly started applications o
45 matches
Mail list logo
