Package: subversion
Version: 1.5.1dfsg1-1
Severity: wishlist
Tags: l10n patch
Hi,
that's just a two-letter typo, but it really strikes (my only use of subversion
is some “svn ls”/“svn info” to debug whether my network connection or git-svn
went wild, so I see it almost every time I use svn ;)).
Package: texlive-base
Severity: serious
Hi,
texlive-base fails to install:
Setting up texlive-base (2007.dfsg.1-4) ...
Running mktexlsr. This may take some time... done.
Building format(s) --all.
This may take some time...
fmtutil-sys failed. Output has been stored in
/tmp/fmtutil.oUGZQN
> I installed FAI 3.2.12 and it seems like this bug may still exist in even
> 3.2.13. I've been able to reproduce it reliably in Vmware Server where the
> disk won't be formatted when it doesn't have a label. However once I put a
> label on it, it works fine. The other weird thing is the FAI ban
Vikram Noel Ambrose <[EMAIL PROTECTED]> wrote:
> Jim Meyering <[EMAIL PROTECTED]> wrote:
...
if (SELinux, with no other MAC or ACL)
use '.'
else if (any other combination of alternate access methods)
use '+'
...
>>> Here's sample output, running on an SELinux
Package: udev
Version: 0.125-7
Severity: normal
I create series of lvm snapshots for backup purpose.
When I remove that snapshots I get errors like:
/dev/dm-19: stat failed: No such file or directory
Path /dev/dm-19 no longer valid for device(254,19)
or
/dev/disk/by-id/dm-name-hal9001VG-ora-rea
* Matthew Palmer <[EMAIL PROTECTED]> [2008-10-24 06:51]:
> I didn't change the GPIO pin map, so I don't think that I need to change the
> valid_pins. However, I'm not sure that the GPIO map is *necessarily* the
OK, patch applied. Thanks.
> same for the A1 and B1, so it's possible that it'll nee
forwarded 498249 https://bugs.freedesktop.org/show_bug.cgi?id=18200
thanks
Am Donnerstag, den 23.10.2008, 10:17 +0200 schrieb Noèl Köthe:
> --- Comment #1 from Alex Deucher <[EMAIL PROTECTED]> 2008-10-21 09:24:47 PST
> ---
> This is not a driver problem. The X server adds those modes since the
b. The RAR/WinRAR unlicensed trial version may not be distributed
inside of any other software package without written
permission of the copyright owner.
Section 5.b
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Co
You wrote "I think Debian need to use NAS tecnology too, and no have any other
implementation
around this." and cited the packetfence description afterwards: "PacketFence is a
Free and Open Source network access control (NAC) system."
NAS != NAC
typo? ;-)
--
To UNSUBSCRIBE, email to [EMAIL
unmerge 502704
reopen 502704
thanks
> > Could you please test with acpid_1.0.6-15? I'd expect it to fix your
> > problem or
> > I misjudged where your problem lies.
> >
> > Michael
>
> Hello.
>
> acpid_1.0.6-15 exhibits the same issue and I confirmed that
> /proc/modules does exist at that poin
Package: gnuplot
Version: 4.2.4-1
Severity: wishlist
I am not a proponent of lua, but tikz is very nice. It would be
great if gnuplot in Debian would come with
http://peter.affenbande.org/gnuplot/
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unst
On Fri, Oct 24, 2008, Michael Meskes wrote:
> if [ $MODULES ]; then
> modprobe --all --use-blacklist $MODULES 2>/dev/null
> fi
Err you probably lack a -n here, but FYI there's already:
if [ -z "$MODULES" ]; then
return
fi
I think modprobe --all always returns 0 (which is p
Package: phpmyadmin
Version: 4:2.9.1.1-8
Severity: normal
Tags: patch
The last security update introduced an impossibility to change the language
onto the login page and when a user is identified.
In attachment, a patch for resolving the problem.
Cordially,
Cedric Devillers
patch-commo
Package: when
Version: 1.1.12-1
Severity: minor
Hello,
Package description of when does not say much (which might be
appropriate, I don't know), but it says that "It doesn't depend on any
libraries, so it's very easy to install." That is completely
irrelevant for a Debian system, where no pa
tags 503270 pending
thanks
On Fri, October 24, 2008 10:13, Cédric Devillers wrote:
> The last security update introduced an impossibility to change the
> language onto the login page and when a user is identified.
>
> In attachment, a patch for resolving the problem.
Thanks, I also discovered th
Christian Perrier has stated his intent to NMU the package for one
other translation, he can go ahead and add the Basque translation,
too.
-Hilko
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Fri, Oct 24, 2008 at 07:57:05AM +0100, Lawrence Woodman wrote:
> Hello Rodrigo,
>
> Some answers to your questions follow:
>
> ... [ Everything OK ] ...
>
> This probably doesn't help much, other than to eliminate the obvious.
> If you want me to try anything else, please don't hesitate to con
On Wed, Oct 22, 2008 at 05:26:24PM +0200, Martin Michlmayr wrote:
> * Matthew Palmer <[EMAIL PROTECTED]> [2008-10-22 11:34]:
> > I wasn't sure if adding an extra udeb into the initrd was acceptable; since
> > it's OK, I've reworked the patch to do that instead. New patch attached,
> > with tests t
Hi,
I shall send it to the upstream maintainers.
There is already a new upstream version available. Dont know if you are
able to test it to see if the problem still exists in the new version.
Regards,
Willem
--
This message has been scanned for viruses and
dangerous content by MailScanner, a
Dear maintainer of libpam-rsa and Debian translators,
Some days ago, I sent a notice to the maintainer of the libpam-rsa Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
The package maintainer and I agreed for a translation update round. At
the
On Thu, Oct 23, 2008, Justy Burdick wrote:
> Can anyone from the elisa team comment on this debian bug?
> It looks like a very easy fix, but has had no action for > 1 month.
It's not particularly an easy fix. What this requires is either
preparing a new set of elisa uploads, or backporting the
On Fri, Oct 24, 2008, Michael Meskes wrote:
> No. For some strange reasons the "if [ $MODULES ]" works for me as does
> "if [ ! -z $MODULES ]" but "if [ -n $MODULES ]" does not.
Err because you need to quote it!
if [ -n $MODULES ] becomes if [ -n ] when MODULES is empty; what you
want is if [
On Fri, Oct 24, 2008 at 10:19:55AM +0200, Loïc Minier wrote:
> On Fri, Oct 24, 2008, Michael Meskes wrote:
> > if [ $MODULES ]; then
> > modprobe --all --use-blacklist $MODULES 2>/dev/null
> > fi
>
> Err you probably lack a -n here, but FYI there's already:
No. For some strange reasons the "
According to upstream, this will not be fixed in any 0.94 point releases, but
possibly in 0.95.
Best,
Michael
pgpRNgWnilevi.pgp
Description: PGP signature
Dear maintainer of jffnms and Debian translators,
Some days ago, I sent a notice to the maintainer of the jffnms Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
I announced the intent to build and possibly upload a non-maintainer upload
for thi
Package: xmame
Version: 0.106-3
Severity: wishlist
Tags: patch l10n
Dear xmame maintainer,
Here's updated Japanese po-debconf template (ja.po) file.
Could you apply it, please?
--
Regards,
Hideki Yamane henrich @ debian.or.jp
http://wiki.debian.org/HidekiYamane
# Copyright (C) 2006-2008
On Fri, Oct 24, 2008 at 11:28:59AM +0200, Anders Boström <[EMAIL PROTECTED]>
wrote:
> > "AB" == Anders Boström <[EMAIL PROTECTED]> writes:
> > "MH" == Mike Hommey <[EMAIL PROTECTED]> writes:
>
> MH> On Wed, Sep 03, 2008 at 04:19:45PM +0200, Anders Boström wrote:
> >>> Package: iceweasel
Package: proftpd-dfsg
Version: 1.3.1-15
Hi,
I would like you to consider enabling the configuration option "--enable-nls".
The UTF8 encoding support won't work as it should if proftpd is not compiled
with this option.
proftpd won't reply correctly to the client when it asks if the server uses
U
Package: apcupsd
Version: 3.12.4-2
Severity: normal
When diagnosing an unrelated (and now solved) logging issue with apcupsd
I had cause to look at the code and found that the syslog priorities in
action.c seem inconsistent. Some more important (IMO) messages have
lower priorities than some rout
On Oct 24, Grzegorz Kolorz <[EMAIL PROTECTED]> wrote:
> /dev/dm-19: stat failed: No such file or directory
> Path /dev/dm-19 no longer valid for device(254,19)
What shows these errors?
--
ciao,
Marco
signature.asc
Description: Digital signature
Hello Jacob,
could you please tell us exactly what you are trying to say? In the Ubuntu bug
report you mention, it's clearly stated that "that fix" is NOT included in 0.60
and might be ported from some development stage into 0.60. And I see no
progress in this process since July.
And in fact,
On Thu, Oct 23, 2008, Andreas J Guelzow wrote:
> Any bug that causes the equivalent of a crash is critical. I you think
> that one can do without that menu item then remove the menu item.
Check the bugs.debian.org documentation on bug severities, "critical"
has a particular meaning.
We could a
Package: xmame
Severity: wishlist
Tags: patch l10n
Please update the italian debconf templates translation (attached).
Thanks,
Luca
it.po
Description: Binary data
This bug is avoided if you choose the option
No restart required
in the Edit Command dialog.
You can verify this in the file
/etc/gdm/gdm.conf
At the end of the file, you should see something like
CustomCommandNoRestart0=true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject o
On Thu, Oct 23, 2008 at 09:18:20AM -0700, Sebastien Delafond wrote:
> On Wed, Oct 22, 2008 at 08:19:16PM +0100, Mark Hindley wrote:
> > I didn't like the try again part of the patch. The point of this
> > function is to prevent a DOS. I could see that by keeping a socket
> > open, but not sending a
On Fri, Oct 24, 2008 at 11:00:28AM +0200, Loïc Minier wrote:
> > No. For some strange reasons the "if [ $MODULES ]" works for me as does
> > "if [ ! -z $MODULES ]" but "if [ -n $MODULES ]" does not.
>
> Err because you need to quote it!
> ...
Sorry, incorrectly pasted (in fact I typed this) int
Package: bsdmainutils
Version: 6.1.10ubuntu2
Severity: normal
I found the same problem described in bug #137059. If I have a calendar
entry containing the word 'linux' (or 'unix') calendar translates it to
'1', for example:
$ cat ~/.calendar
Oct 25 italian linux day
$ calendar -f ~/.calendar
Oc
Eduard Bloch writes:
> could you please tell us exactly what you are trying to say? In the
> Ubuntu bug report you mention, it's clearly stated that "that fix"
> is NOT included in 0.60
Yes. We have fixed the bug in upstream SVN since 0.60 was released.
The fix has not yet gone into a new release.
severity 503274 wishlist
thanks
On Fri, Oct 24, 2008 at 11:33:54AM +0200, Stefan wrote:
> Package: proftpd-dfsg
> Version: 1.3.1-15
>
> Hi,
>
> I would like you to consider enabling the configuration option "--enable-nls".
> The UTF8 encoding support won't work as it should if proftpd is not com
A patch was in this thread:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg16297.html
Rob promised to respin it tomorrow and resend it in to the list.
thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
severity 503267 normal
tags 503267 + unreproducible
thanks
Hi Daniel,
very strange ...
> /usr/bin/fmtutil: line 336: /texconfig/tcfmgr: No such file or directory
> fmtutil: config file `fmtutil.cnf' not found.
Output of printenv as root please. do you have local cfg changes (md5sums
of /etc/
Another reason for obeying START is when you do an update of puppet
package. If it doesn't obey START it will run puppet and possibly
apply a bunch of changes to a server. I'm paranoid and on production
systems _always_ run puppet in --noop mode before running live.
Thanks,
Adrian
--
To U
> "AB" == Anders Boström <[EMAIL PROTECTED]> writes:
> "MH" == Mike Hommey <[EMAIL PROTECTED]> writes:
MH> On Wed, Sep 03, 2008 at 04:19:45PM +0200, Anders Boström wrote:
>>> Package: iceweasel
>>> Version: 3.0.1-1
>>> Severity: normal
>>>
>>> I've used file-roller as archive manage
Package: xserver-xorg-video-intel
Version: 2:2.3.2-2+lenny5
Severity: normal
I have the X server lockup randomly, sometimes at the GDM greeter, sometimes
later. the whole system blocks and I have to turn off power and reboot.
It happens with all version of X.org and xserver-xorg-video-intel I h
Le jeudi 23 octobre 2008 à 19:29 -0200, Marco Túlio Gontijo e Silva a
écrit :
> * Start glade.
> * Add a window.
> * Add a Menu Bar
> * Right click in the window, click on Edit
> * Add a new Menu Item
> * Change the Menu Item's Name to _Channel
> * Click on the Type's Combo Box
>
> Crash!
Sorry b
> "MH" == Mike Hommey <[EMAIL PROTECTED]> writes:
MH> On Fri, Oct 24, 2008 at 11:28:59AM +0200, Anders Boström <[EMAIL
PROTECTED]> wrote:
>> > "AB" == Anders Boström <[EMAIL PROTECTED]> writes:
>> > "MH" == Mike Hommey <[EMAIL PROTECTED]> writes:
>>
MH> On Wed, Sep 03, 2008 at 0
Hi there!
For the d-release list: this is a request about how to fix the bug below
in time for lenny.
For everyone: please keep at least the bug report cc:ed, no subscription
needed, TIA.
On Fri, 24 Oct 2008 01:48:53 +0200, David Matthew Mattli wrote:
> Package: sbcl
> Version: 1:1.0.18.0-1
> Se
Hi,
here at home I don't need the wireless-essid setting in
/etc/network/interfaces to connect to the AP with a hidden SSID.
The following settings work for me both on my desktop with the rt73usb
driver and on my laptop with the b43 driver:
iface wlan0 inet dhcp
wpa-driver wext
wpa-a
Package: debsums
Severity: wishlist
Tags: l10n patch
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sorry for being late...
Please include attached updated translation fi.po to the package.
Regards,
Esko Arajärvi
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkkBm
Hi,
the patch works here! When I strace -f -p a python program with
two threads hitting ctrl-c does not leave the program in stopped
state. Thank you, could this be applied to the normal package?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
Hi,
Bastian Blank wrote:
It's obviously buggy to emit a warning on standards-mandated behaviour!
I know you can turn this warning off with -Wno-unknown-pragmas, but
that's not something you want to be doing in production code.
Please show the part of the standard. A compiler may produce warni
On Fri, Oct 24, 2008 at 12:41:45PM +0200, Anders Boström <[EMAIL PROTECTED]>
wrote:
> MH> In the preferences.
>
> Can you please be more specific! I can't find it in iceweasel's
> preferences. I think it should show up under Applications, but it
> doesn't, at least not for me.
Try removing the
At 1224823738 time_t, Kumar Appaiah wrote:
> I hope you are able to use the patch to fix these bugs. If you need me
> to do something more, please tell me (anything except learning Perl! ;-)).
I've at least push it. I've no time nor interest to test and check that,
so I'll trust you on this one.
On Fri, Oct 24, 2008 at 10:59:15AM +0100, Adrian Bridgett wrote:
> Another reason for obeying START is when you do an update of puppet
> package. If it doesn't obey START it will run puppet and possibly
> apply a bunch of changes to a server. I'm paranoid and on production
> systems _always_ run
A better patch, based on Martin Michlmayr's feedback, is attached. Enjoy!
- Matt
unchanged:
--- a/installer/build/pkg-lists/netboot/network-console/arm/orion5x.cfg
+++ b/installer/build/pkg-lists/netboot/network-console/arm/orion5x.cfg
@@ -7,6 +7,8 @@ ext2-modules-${kernel:Version}
ext3-modules-
Package: wnpp
Severity: wishlist
Owner: Kalle Kivimaa <[EMAIL PROTECTED]>
* Package name: libjakarta-ecs-java
Version : 1.4.2
Upstream Author : Stephen Nagy <[EMAIL PROTECTED]> and Jon S. Stevens <[EMAIL
PROTECTED]>
* URL : http://jakarta.apache.org/ecs/
* License
Package: gnome-terminal
Version: 2.22.3-3
Severity: normal
If you have tabs with different font size, every time you switch between
them, all tabs in the current gnome-terminal window will be resized. The
underlying terminals will receive SIGWINCH and be ioctled to whatever the
foreground tab's
Hi,
I would really love to see vlan support in DI.
I just had a box with vlans connected already and wanted to install
debian with latest lenny installer but couldn't because of the lack of
vlan support.
I'd prefer to have proper deb-conf vlan support, if possible. Shouldn't
be too hard.
Yes, NAS != NAC, typo error.
I really want to say NAC.
Thank's
Brivaldo Jr (condector)
2008/10/24 Florian Maier <[EMAIL PROTECTED]>:
> You wrote "I think Debian need to use NAS tecnology too, and no have any
> other implementation
> around this." and cited the packetfence description afterwards:
reassign 499657 apt-listbugs
merge 499657 493632
stop
On 21.09.08 LUK ShunTim ([EMAIL PROTECTED]) wrote:
Hi,
> Package: texlive-latex-base
> Version: 2007.dfsg.1-3
> Severity: normal
>
> When upgrading texlive-latex-base and using apt-listbugs to check
> bugs, it chokes the whole installation p
subject says it all, my NMU of tinymce is now in unstable, so please
update wordpress now. If you need a sponsor, let me know, but I can't
upload sooner than monday.
regards,
Sven
signature.asc
Description: OpenPGP digital signature
Package: abiword
Version: 2.6.4-5
Severity: normal
When printing a longer document, I try to set the following:
1. From the Print Window : Settings : configure -> Duplex
2. Print Window -> Layout : Handout 2 pages on 1 page
neither has any effect on the printed results, which is one-sided, one p
> "MH" == Mike Hommey <[EMAIL PROTECTED]> writes:
MH> On Fri, Oct 24, 2008 at 12:41:45PM +0200, Anders Boström <[EMAIL
PROTECTED]> wrote:
MH> In the preferences.
>>
>> Can you please be more specific! I can't find it in iceweasel's
>> preferences. I think it should show up under Applica
On Fri, Oct 24, 2008 at 10:47:26AM +0100, Jacob Nevins wrote:
> Eduard Bloch writes:
> > and might be ported from some development stage into 0.60.
> > And I see no progress in this process since July.
>
> We (upstream) can't port it to 0.60 because that's already been
> released. It'll almost cer
Package: tiger
Version: 1:3.2.2-7
Severity: serious
There was an error while trying to autobuild your package:
> Automatic build of tiger_1:3.2.2-7 on lebrun by sbuild/sparc 98
> Build started at 20081019-1336
[...]
> ** Using build dependencies supplied by package:
> Build-Depends: debhelper (
reassign 503237 python-apt
retitle 503237 Should use security.debian.org for lenny/updates
kthxbye
software-properties-gtk gets this information from
/usr/share/python-apt/templates/Debian.info from the python-apt package.
I attach the diff for my NMU which fixes this by forcing all
(lenny|etch|s
[Cyril Brulebois]
> msgid "Network connection closed unexpectedly"
> -msgstr "La connection réseau a été fermée de façon inattendue"
> +msgstr "La connexion réseau a été fermée de façon inattendue"
Thanks, fixed upstream, will fix in Debian soon.
--
Peter Samuelson | org-tld!p12n!peter | http:/
# Automatically generated email from bts, devscripts version 2.10.35
# via tagpending
#
# debian-maintainers (1.47) UNRELEASED; urgency=low
#
# * Add Debian maintainer Olly Betts. Closes: #502190
package debian-maintainers
tags 502190 + pending
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
# I have looked on my second laptop and the wrong caps led behaviour is present
# as same as before, I have caps lock and control switched
# what's different (but seems irrelevant is the fact that I don't have
that many layouts)
reassign 459371 gnome-control-center
found 459371 1:2.22.2.1-2
retitle
Package: apt-listbugs
Version: 0.0.94
Severity: minor
I'm not really sure, what is going on here. Hence I file this bug as minor.
Every night runs on my computer a cron job by apt-listbugs, which compares
the status of some critical bugs (which pin some packages using
/etc/apt/preferences) to the
Package: kboincspy
Version: 0.9.1-5
Severity: normal
KBoincSpy wrongly assumes that localhost BOINC client is configured to
work online and running computation based on preferences even if either
network activity or computation had been temporarily suspended.
Steps to reproduce: with BOINC clie
On Sun, Oct 19, 2008 at 05:05:12PM +0300, Niko Tyni wrote:
> #502435 shows a perl regression with Time::HiRes alarms and kernels >=
> 2.6.22, including the Etch-And-A-Half 2.6.24.
>
> Would it be possible to get an updated version with the attached debdiff
> into the next point release?
Yes, plea
> severity 503274 wishlist
> thanks
>
> On Fri, Oct 24, 2008 at 11:33:54AM +0200, Stefan wrote:
> > Package: proftpd-dfsg
> > Version: 1.3.1-15
> >
> > Hi,
> >
> > I would like you to consider enabling the configuration option
> > "--enable-nls". The UTF8 encoding support won't work as it should if
2008/10/6 Daniel <[EMAIL PROTECTED]>:
> On Sun, Oct 05, 2008 at 07:23:59PM +0300, Eddy Petrișor wrote:
>> >ii libgl1-mesa-glx [libgl 6.5.2-5~etch A free implementation of the
>> >OpenG
>> >ii libglu1-mesa [libglu1] 6.5.1-0.6 The OpenGL utility library
>> >(GLU)
>>
>> I see your syste
Package: pmacct
Version: 0.11.4-1
Severity: minor
I would appreciate if you added init.d scripts, an /etc/default configuration
and an /etc/*/sfacctd.conf file so people can run the sfacctd, too. Of course
the same would apply to the nfacctd. pmacctd was the only software I found
that could deal w
Tags 434647 + patch
thanks
Hi,
> The culprit is the line from kaffe.prerm
> update-alternatives --auto $file || true
yep, I agree with this assessment.
> Please remove this line. No maintainer scripts should ever run this
> line as it (by definition) overrides the system administrator's
> prefe
I compiled vanilla version 2.6.27.3 with CONFIG_MMC_SDHCI_PCI enabled and the
SD card reader now works again.
I tested latest debian kernel 2.6.26-9 as well with no success.
thanks,
Andrea.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAI
do you mean an init-script, so that the server package can be configured
to launch the openarena server binary while the system is booting?
cheers - fuddl
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
Ferenc Wagner wrote:
> a possible workaround is to use
> modprobe qla2xxx ql2xfdmienable=0
> to disable FDMI completely.
actually, the workaround isn't all that obvious; modinfo qla2xxx says:
...
ql2xfdmienable:Enables FDMI registratons Default is 0 ...
so another possible "fix" would be to just
Package: xen-3
Severity: important
After testing with waldi, he found out that the kernel arch cant be different
as the xen-utils. So when using xen-amd64 with xen-utils-i386
the dom'Us wont work.
xm create /etc/xen/test2.cfg gets:
VmError: (22, 'Invalid argument')
Debug:
[2008-10-23 18:01:48
On Fri, Oct 24, 2008 at 01:01:00PM +0200, Julien Danjou wrote:
> At 1224823738 time_t, Kumar Appaiah wrote:
> > I hope you are able to use the patch to fix these bugs. If you need me
> > to do something more, please tell me (anything except learning Perl! ;-)).
>
> I've at least push it. I've no t
> do you mean an init-script, so that the server package can be configured
> to launch the openarena server binary while the system is booting?
Yes, that's the one.
And then have probably a /etc/default/openarena.conf or so file in which
the commandline parameters can be given.
Folkert van Heusd
Package: buildbot
Version: 0.7.9-1
Severity: important
Hi,
for me, issuing /etc/init.d/buildbot reload (after changing master
configuration, eg.), slaves die, since they don't seem to like getting a
SIGHUP. I have solved this by changing reload_buildbot to the following:
70 reload_buildbot() {
7
Hi, i'm currently investigating open64 and i would like to know what's
the ITP status.
Eventually, i could spend some spare time on licenses stuff, as well on
shape/splitups contribs.
ciao,
--
Alessandro Ogier
gpg --keyserver pgp.mit.edu --recv-keys EEBB4D0D
--
To UNSUBSCRIBE, email to [EMA
package axiom
forcemerge 501616 475171 499468
thanks
Hi,
I'm hereby forcebly merging the three bugs reporting new upstream versions of
axiom.
I think that the "Gold" version should be packaged ( axiom-july2008-src.tgz ).
Regards,
OdyX
--
Didier Raboud, proud Debian user.
CH-1802 Corseaux
[
Package: pgadmin3
Version: 1.8.4-3
Severity: wishlist
It's very confusing for new users when pgadmin3 brings up a window (just go to
tools->server status) telling the user quite some stuff about adminpack. Part
of this information is not at all relevant for a Debian system, but the
information whe
Package: libgsl0-dev
Version: 1.8-2
Severity: wishlist
Hi,
Many programs one might use gsl for, one might also want to profile to
try and optimise. It would be nice if a version of gsl with profiling
information in it was available.
The best way to do this would be, I think, to build static li
Jim Meyering wrote:
A desire for compatibility makes "+" look good.
"." is appealing for SELinux-only because it's inconspicuous.
Speaking as a fairly new SELinux user/admin, having a "."
next to every file in my ls output is just as useful or
non-useful as having a "+" next to them, so does
Package: dupload
Version: 2.6.4ubuntu3
Severity: wishlist
Hi, the patch below adds a new "cp" method for local uploads.
Thanks,
Free
-- BEGIN PATCH --
--- /usr/bin/dupload.ori2006-08-14 16:25:40.795862312 +0100
+++ /usr/bin/dupload2006-08-14 16:30:02.718044088 +0100
@@ -464,6 +464,8
Hello
Hi, i'm currently investigating open64 and i would like to know what's
the ITP status.
Eventually, i could spend some spare time on licenses stuff, as well on
shape/splitups contribs.
I never got to build version 4.1 nor 4.2 of open64 :(
If you get it to build, that'd be cool.
Yours,
G
> subject says it all, my NMU of tinymce is now in unstable, so please
> update wordpress now.
Yesterday I made the package and sent it to Thijs (my sponsor) so
Wordpress is going to be updloaded in a few hours/days (as soon as my
sponsor uploads it).
Thank you very much for your NMU.
Cheers.
A
Package: linux-latest-2.6
Version: 16
Severity: wishlist
User: [EMAIL PROTECTED]
Usertag: package-creation
Hi there!
This discussion started on the smartphones-kernel mailing list [1],
please keep at least that list cc:ed, TIA. If you do so, no need to cc:
me, I read the list.
NB, I decided to
Hi Matthew,
On 24 October 2008 at 14:16, Matthew Vernon wrote:
| Package: libgsl0-dev
| Version: 1.8-2
| Severity: wishlist
|
| Hi,
|
| Many programs one might use gsl for, one might also want to profile to
| try and optimise. It would be nice if a version of gsl with profiling
| information
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
According to Mike Edenfield on 10/24/2008 7:19 AM:
> Based on the kind of real-world problems I've had, the most useful thing
> ls could tell me about a file on my SELinux system would be that it
> *should* have a label and *doesn't*, something like:
>
Package: libsnmp-python
Version: 5.4.1~dfsg-10
Severity: important
Tags: patch
Hi,
I would like to re-open netsnmp Bug "[ 1868278 ] A bug in python useing
netsnmp.snmpwalk".
That's because cited patch (
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=497656 ) was addressing a seg
fault.
I
Il giorno ven, 24/10/2008 alle 15.23 +0200, Gürkan Sengün ha scritto:
> Hello
>
> > Hi, i'm currently investigating open64 and i would like to know what's
> > the ITP status.
> >
> > Eventually, i could spend some spare time on licenses stuff, as well on
> > shape/splitups contribs.
>
> I never
Package: munin-node
Version: 1.2.6-7
Severity: normal
When I install munin-node I get this errors.
System is just installed (minimal installation and dist-upgrade)
Initializing plugins..# There were some errors:
# Got junk from postgres_block_read_: Can't locate DBI.pm in @INC (@INC
contains: /
Hi,
I've tried to reproduce your bug in a freshly installed chroot
environment as well as on a running system. On my systems, all
packages are successfully build: pcscd, libpcsclite-dev and
libpcsclite1.
Are you sure libusb-dev is a build dependency for pcsc-lite source
package?
Cheers,
Xavi
This bug was reported over 2 months ago and Lenny will be released soon.
But this bug is still not fixed. Looks like nothing was done to fix it.
I have to say I'm loosing faith in quality of Debian if bugs like this
are just ignored.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Hi,
what is with http://bugzilla.gnome.org/show_bug.cgi?id=541872#c39 ?
Tim Niemeyer
signature.asc
Description: Digital signature
1 - 100 of 313 matches
Mail list logo
