Package: claws-mail
Version: 3.7.10-2
Severity: important
Stepping through the posts in an RSS feed (in this case "Planet Claws
Mail" - http://planet.claws-mail.org/rss20.xml) causes claws-mail to
segfault. I step through them one after another pressing Shift-N, but
unfortunately it doesn't seem c
The issue is happening because config page is timing out and initialization is
not successful
Can you collect the kernel messages even for the KERN_DEBUG messages also for
mpt driver?
This is to find out which config page is failing.
Also what is the f/w version of LSI53C1030 SCSI controller th
Another test that might be useful is booting from a kfreebsd-9 rescue
image and trying to import your pool from command-line (zpool import
-o altroot=/target base).
If that fails it'll probably give more useful diagnostics.
--
Robert Millan
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ..
On Tue, Dec 13, 2011 at 06:13:08AM +, Ben Hutchings wrote:
> I don't personally need any fixes. I've been build-testing every module
> package I could find against Linux 3.1. Then I spotted this problem
> after seeing the build failure.
>
> > Good catch, thanks!
>
> You're welcome.
>
> But
2011/12/12 Christoph Egger :
>> Please try setting vfs.zfs.debug=1 from GRUB and see if relevant
>> output turns up.
>
> [...]
Can't see anything relevant in those messages. Could you rebuild
kfreebsd-9 with debug options (see attachment) and try that? The
internal sanity checks might bring up s
On Thu, 2011-12-01 at 14:52 +0100, Mirco Bauer wrote:
> tags 633526 + patch
> retitle 633526 NFS client uid/gid cache broken on VServer kernels
> thanks
>
> Herbert Poetzl wrote:
>
> > we now understand the problem, and it was fixed for
> > 3.0.4 with the following patch:
> >
> > http://vserver
(adding #648744 to CC)
2011/12/13 Steven Chamberlain :
> Now that kfreebsd-9 is in testing, I tried to install it using the
> latest businesscard d-i image. It works fine, except there is no
> installable zfsutils for it in Wheezy yet, so #648744 is a really
> awkward problem.
I guess we should
Dear maintainer of localization-config and Debian translators,
Some days ago, I sent a notice to the maintainer of the localization-config
Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
I announced the intent to build and possibly upload a no
Package: ipmitool
Severity: grave
Tags: security
Justification: user security hole
Hi,
an insecure file permission flaw was found in the way ipmitool handled
the PID files creation.
There's more info in the Red Hat bug, along with a patch, see
https://bugzilla.redhat.com/show_bug.cgi?id=742837
severity 411585 important
tag 411585 +confirmed
thanks
I am marking this bug as important and confirmed for various reasons. I
am finding it with purge rather than unregister. However it seems likely
that that purge is defined in terms of unregister, or at least that they
share code. Unregister is
On Tue, Dec 13, 2011 at 05:23:23AM +, Andy Smith wrote:
> What I'm noticing is the occasional incorrect checksum and "ICMPv6
> packet too big" messages seen above around 23:59:00.672905 and
> 23:59:01.240946 after a packet of length 2856. These do not occur
> on the server with the e1000e driv
On Tue, 2011-12-13 at 16:29 +1030, Ron wrote:
[...]
> > I'm rating this as grave due to the risk of data loss.
>
> The risk is low, because nobody should actually be using the module that
> this code is in since a long time ago - but I'll really stop building it
> everywhere now, and that will fix
Hi Ben,
On Mon, Dec 12, 2011 at 05:17:01PM +, Ben Hutchings wrote:
> Package: vpb-driver-source
> Version: 4.2.53-1
> Severity: grave
>
> All kernel code using x87 or SSE operations must enclose these in
> kernel_fpu_begin() ... kernel_fpu_end(). Otherwise, userland
> floating-point state m
Package: bup
Version: 0.24b-1.1
Severity: normal
Dear Maintainer,
I saw the 0.25 version is availibble for many other architectures, but not for
amd64. Due to this I can not install it
due to the python (<2.7) dependency.
Can you ensure 0.25 is availible for amd64 as well?
Thanks
-- System In
Hi!
On Fri, 2011-12-09 at 16:40:41 +0100, Svante Signell wrote:
> Source: rsyslog
> Version: 5.8.6-1
> Severity: important
> Tags: patch
> User: debian-h...@lists.debian.org
> Usertags: hurd
> rsyslog FTBFS on GNU/Hurd due to the usage of PATH_MAX in one function
> static rsRetVal Load(uchar *pMo
I just realised I still haven't replied to this. Sorry for the delay.
On Mon, 2011-03-07 at 17:54 +0100, Luk Claes wrote:
> On 03/06/2011 07:37 PM, Ben Hutchings wrote:
> > On Sun, 2011-03-06 at 18:41 +0100, Luk Claes wrote:
> >> On 03/06/2011 06:11 PM, Ben Hutchings wrote:
>
> >> I'm willing to
Package: xserver-xorg-video-intel
Version: 2:2.17.0-1
Severity: normal
Dear Maintainer,
I'm using a Asus eeePC 701 which has a native resolution of 800x480.
I wish to be able to pan the screen to something bigger sometimes, like
1024x768, using "xrandr --output LVDS1 --panning 1024x768"
Since s
Package: linux-2.6
Version: 2.6.32-38
Severity: important
Tags: ipv6
I have three squeeze servers running:
ii linux-image-2.6.32-5-xen-amd64 2.6.32-38 Linux 2.6.32 for 64-bit
PCs, Xen dom0 support
All three servers have Intel gigabit NICs, but one server uses the
e1000e driver and the
affects 619465 darktable
bye
This also affects darktable. I have used the following workaround:
sed -i.orig '/gettext_domain/d' /usr/share/gconf/schemas/darktable.schemas
This is a very annoying bug as it yells even if you do not touch that
specific package - anything that will talk to gconf wil
On Mon, Dec 12, 2011 at 11:56 PM, Jonathan Nieder wrote:
> tags 651912 - unreproducible
> retitle 651912 sandboxing-related renderer crash ("Aw, snap") when loading
> NSS modules
> quit
>
> Jeffry Smith wrote:
>
>> Put there a while ago to fix a different bug - I'd have to trace it
>> back. Shou
After testing the new version, I can confirm it is faster and more
responsive than the previous one (1.6). The upgrade also seems to go
smoothly.
I have a package available, if people are interested I can upload to
experimental.
--
From the age of uniformity, from the age of solitude, from the a
tags 651912 - unreproducible
retitle 651912 sandboxing-related renderer crash ("Aw, snap") when loading NSS
modules
quit
Jeffry Smith wrote:
> Put there a while ago to fix a different bug - I'd have to trace it
> back. Should I remove the symlink?
Sure, that will get chromium working again.
B
Put there a while ago to fix a different bug - I'd have to trace it
back. Should I remove the symlink?
On Mon, Dec 12, 2011 at 11:47 PM, Jonathan Nieder wrote:
> Jeffry Smith wrote:
>
>> ls -ld /usr/lib/nss
>> lrwxrwxrwx 1 root root 30 Nov 23 09:40 /usr/lib/nss ->
>> /usr/lib/x86_64-linux-gnu/n
Jeffry Smith wrote:
> ls -ld /usr/lib/nss
> lrwxrwxrwx 1 root root 30 Nov 23 09:40 /usr/lib/nss ->
> /usr/lib/x86_64-linux-gnu/nss/
Yep, this is your bug (or rather, this is how you escaped the
workaround to the still-present chromium bug). How did that symlink
get there?
--
To UNSUBSCRIBE,
On Mon, Dec 12, 2011 at 11:34 PM, Jonathan Nieder wrote:
> severity 651912 important
> found 651912 chromium-browser/15.0.874.121~r109964-1
> tags 651912 + unreproducible
> quit
>
> Hi Jeffry,
>
> Jeffry Smith wrote:
>
>> Still get "Aw Snap!" when trying to start Chromium.
>
> Thanks for reporting
severity 651912 important
found 651912 chromium-browser/15.0.874.121~r109964-1
tags 651912 + unreproducible
quit
Hi Jeffry,
Jeffry Smith wrote:
> Still get "Aw Snap!" when trying to start Chromium.
Thanks for reporting it.
Please send output from
ldd /usr/lib/chromium/chromium
Package: wodim
Severity: grave
This severity should be right for this one cause it burns corrupt DVD-RW
on this device when setting timeout=1000 as a workaround for the above bug.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble?
Package: liferea
Version: 1.6.5-1.2+b1
Severity: wishlist
1.8.0 was apparently released (according to the topic of the IRC
channel). Unfortunately, no tags on git can confirm that, and the
homepage still lists rc1, but it is fairly clear in the changelog in
git that 1.8.0 has been released.
I hav
Package: Chromium
Still get "Aw Snap!" when trying to start Chromium.
Chromium: aptitude versions chromium
p 14.0.835.202~r103287-1 testing 500
i 15.0.874.121~r109964-1 unstable 500
Libnss3-1d: aptitude version
On 12/13/2011 03:18 AM, Robert Millan wrote:
> Package: zfs-fuse
> Severity: wishlist
> Tags: patch
>
> I've recently added this to zfsutils. I figured that you might find it useful
> for zfs-fuse.
>
> Btw, maybe it'd be a good idea to set up a "zfs-common" package for things
> like
> this (and
On Sun, Dec 11, 2011 at 5:01 PM, Jonathan Nieder wrote:
> Hi Ralph,
>
> Ralph A. Smith wrote:
>
> > ghostscript 8.71 segfaults when invoked by CUPS (via the pdftoraster
> filter)
> > to print to a Seiko Smart Label Printer (SLP) using the PPD provided
> > by Seiko (at www.siibusinessproducts.com)
Package: wnpp
Severity: RFP
Code Browser is released under the GPL v2 License.
http://tibleiz.net/code-browser/download.html
The software appears to have been under steady development since it was created
in 2003.
It seems to be a useful editor in any case and one of the few editors which
sup
Hi,
I'v just uploaded a newer Debian release of the package (1.2.0.6-2), it should
be in unstable in a few minutes. Can you check whether it solves your problem?
At least here it seems to fix the bug.
Greetings and thanks,
Miry
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debi
On Mon, Dec 12, 2011 at 11:57:29AM -0800, Jesse Gross wrote:
> On Mon, Dec 12, 2011 at 12:26 AM, Simon Horman wrote:
> > On Mon, Dec 12, 2011 at 08:00:25AM +, Ben Hutchings wrote:
> >> Since a version of Open vSwitch has been accepted for inclusion in
> >> mainline Linux 3.3, perhaps it could
Package: apt
Version: 0.8.15.9
Severity: important
If I attempt to install gpib-modules-source on an unstable system with
stable sources available, APT proposes the following:
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatica
Package: gliv
Version: 1.9.7-2
Severity: normal
Hi,
gliv is nice and fast!
Unfortunately the mouse wheel zoom feature is backwards (ie it
zooms in when it should zoom out and vise versa.)
I think it should zoom the same way as google maps by default at
least. Perhaps make it configurable if you
Package: wnpp
Severity: wishlist
* Package name: docx2txt
Version : 1.1
Upstream Author : Sandeep Kumar
* URL : http://docx2txt.sourceforge.net/
* License : GPL
Programming Lang: Perl
Description : convert Microsoft OOXML files to plain text
docx2txt i
On Tue, 2011-12-13 at 01:38 +0100, Bill Allombert wrote:
> On Mon, Dec 12, 2011 at 11:49:35PM +, Ben Hutchings wrote:
> > Package: popularity-contest
> > Severity: normal
> >
> > The graphs of 'Number of submissions per architecture' at
> > http://popcon.debian.org appears to show that there a
Source: ido
Version: 0.2.2-1
Severity: serious
Tags: patch
Justification: fails to build from source
IDO FTBFS because it uses G_CONST_RETURN which is deprecated
and also defines G_DISABLE_DEPRECATED.
The attched patch removes G_DISABLE_DEPRECATED from the
makefiles.
-- System Information:
Debia
On Thu, Dec 8, 2011 at 5:11 AM, Fabio wrote:
>> Now that enet is taken care of, I believe the only remaining
>> embedded library is libmozjs/spidermonkey.
>
> In current SVN (will be in 0ad alpha 8) there is support for building against
> libmozjs185 (tested on Ubuntu). Dunno however if it will wo
tags 651905 pending
thanks
The fix is in alioth, will build and upload within 12 hours or so.
On Mon, 2011-12-12 at 19:32 -0500, Adam C Powell IV wrote:
> Package: src:illuminator
> Version: 0.11.0-10
> Severity: serious
>
> The conversion to build-arch and build-indep targets caused illuminator
On Fri, 2011-12-09 at 18:52 +0100, D. Barbier wrote:
> tags 651105 + pending
> thanks
>
> Adam, can you please upload? Dependencies should be fine now, I
> checked with pbuilder.
It's building now, will upload in 12 hours or so.
Thanks,
Adam
--
GPG fingerprint: D54D 1AEE B11C CE9B A02B C5DD 5
package: binutils-m68hc1x
version: 1:2.18-3.1
severity: serious
dpkg-buildflags now supplies -Werror=format-security by default. This
makes binutils-m68hc1x FTBFS.
I first noticed the failure when looking at armhf (and s390x as a
confirming point) build logs. but I
can reproduce the issue lo
Hi,
the latest 0.9.2-1 release will be soon available in unstable, please
try to reproduce this bug with it.
Regards,
--
Alessio Treglia | www.alessiotreglia.com
Debian Developer | ales...@debian.org
Ubuntu Core Developer | quadris...@ubuntu.com
0416 0004 A827 6E40 BB98 90FB
On Mon, Dec 12, 2011 at 11:49:35PM +, Ben Hutchings wrote:
> Package: popularity-contest
> Severity: normal
>
> The graphs of 'Number of submissions per architecture' at
> http://popcon.debian.org appears to show that there are about 90,000
> current submissions for i386 and amd64, whereas the
On Sun, Dec 11, 2011 at 11:32:02PM +, peter green wrote:
> Pal FTBFS in sid
>
> It turns out that the package depends on and links against ncursesw
> but uses the headers from ncurses.
> This seems wrong to me but I don't know enough details about ncurses
> to know just how bad it is.
A quote
Package: src:illuminator
Version: 0.11.0-10
Severity: serious
The conversion to build-arch and build-indep targets caused illuminator
to FTBFS, because buildds do "debian/rules build" which triggers
build-indep without installing the Build-Depends-Indep packages.
Temporary workaround: change to "
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Is there a reason this is still tagged as needs info?
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk7mm1sACgkQJ4UciIs+XuKcUgCguuibssZxh12iyG9W+GV93vcZ
L6o
Thanks for the report. I saw a message from a buildbot and figured it
was a temporary issue for that architechture, but clearly it's a wider
problem.
The big hint to me was that BOTH armhf and s390x failed, these are both
new architectures but they are totally unrelated to each other. So if
somet
Package: ftp.debian.org
Severity: normal
Hi,
libframeworkd-glib is deprecated. These days libfso-glib is used for the
same task.
Currently libframeworkd-glib has one reverse dependency, libphone-ui,
which is also maintained by me. I uploaded a new version of libphone-ui
some minutes ago, which u
I had a similar problem, althoug the error message is not the same. I searched
the web and I found https://bugs.launchpad.net/kubuntu-ppa/+bug/827407 and
https://bugzilla.novell.com/show_bug.cgi?id=709376#c0 .
On the other hand, kmail1 is dead upstream, so maybe this should be a wontfix
:-(
si
Package: popularity-contest
Severity: normal
The graphs of 'Number of submissions per architecture' at
http://popcon.debian.org appears to show that there are about 90,000
current submissions for i386 and amd64, whereas the table to the left
shows about 60,000 for each.
In general, it seems that
Package: iptables-persistent
Version: 0.5.3
Severity: normal
Dear Maintainer,
* What led up to the situation?
I ran an apt-get upgrade and iptables-persistent failed with the following
error message:
---
Setting up iptables-persistent (0.5.3) ...
ip6tables-save v1.4.12: Cannot initialize: Ad
Hi Thomas,
adding the `resolvconf -u' indeed fixes this problem. Thank you very
much!
Just to let you know my use-case:
I have a /etc/resolvconf/resolv.conf.d/tail with some fall-back
nameserver entries. This is probably not the correct way, but it worked,
and saves me specifying these fall-backs
reassign 651900 libdrm-intel1
forcemerge 651316 651900
thanks
On 13.12.2011 00:18, Javier Barroso wrote:
> package: gnome-core
> version: 1:3.0+6
> Severity: normal
>
> Hi,
>
> When I try to see a video (or to see a v4l2 device) with vlc, X will
> restart and my gnome session is out. (with mplay
On Montag, 12. Dezember 2011, Damien Raude-Morvan wrote:
> You should have a look at old "make-jpkg" tool[..]
No, thanks, I shall not. I already have a working solution.
> (but someone has to do the work to support newer JDK in this
> tool).
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ.
Package: maven-repo-helper
Version: 1.7ubuntu1~ppa5
Severity: normal
We should be able to specify the option --create-link for a POM file generating
a jar
-- System Information:
Debian Release: wheezy/sid
APT prefers oneiric-updates
APT policy: (500, 'oneiric-updates'), (500, 'oneiric-secur
package: gnome-core
version: 1:3.0+6
Severity: normal
Hi,
When I try to see a video (or to see a v4l2 device) with vlc, X will
restart and my gnome session is out. (with mplayer or cheese it works ok)
Inside awesome wm I can use vlc and not crash is produced (that is why I
don't open this bug ag
Package: gnome-shell
Version: 3.0.2-8+b1
Severity: important
Hi,
gnome-shell sometimes freezes when I am switching workspaces, The mouse
still moves, but the UI does not respond at all. It seems like the click
events are still passing through the windows, but I cannot interact
with them or view t
Package: ecryptfs-utils
Version: 93-1
Severity: important
Whenever I unlock gnome-screensaver, if some time has passed in the locked
state, instead of showing the unlock box, a blank screen with only the title
bar (incl. date/time) is shown. The area of the screen that would be occupied
by the unl
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: pu
Hi
The security team asked us to consider an upload to pu fixing 2 low severity
security issues (which don't warrant a DSA).
Attached a debdiff of the proposed upload.
Cheers
Luk
diff -Nru c
Robert Millan writes:
> 2011/12/12 Christoph Egger :
>>> Maybe they've fixed this bug recently. I just uploaded a new SVN
>>> snapshot to experimental (9.0~svn228246-1), can you try?
>>
>> Still the same failure.
>
> Please try setting vfs.zfs.debug=1 from GRUB and see if relevant
> output turns
found 637234 2.6.32-39
notfound 637234 3.0.0-1
thanks
On Mon, Dec 12, 2011 at 08:35:47AM +, Ian Campbell wrote:
> On Sun, 2011-12-11 at 22:02 +, Dominic Hargreaves wrote:
> > This problem is also present with ext3 by default now, following the
> > barriers-by-default change in Linux 3.1 (
Hi all,
Le dimanche 11 décembre 2011 17:25:41, Holger Levsen a écrit :
> On Sonntag, 11. Dezember 2011, Matthias Klose wrote:
> > the DLJ bundles were created because you are not allowed to re-distribute
> > the jdk packages from oracle. Did that change recently?
>
> I believe inside an organisat
Hi Guy,
Guy Harris writes:
> Using libnl to create a monN interface works better than using Wireless
> Extension ioctls to turn on monitor mode, which is what libpcap does if
> *not* linked with libnl.
Can you provide more information about the problems the libnl mode fixes?
How exactly does it
On Sun, Dec 11, 2011 at 11:32:02PM +, peter green wrote:
> package: pal
> severity: serious
> version: 0.4.3-7
> tags: patch
>
> Pal FTBFS in sid
Thanks for the report. I saw a message from a buildbot and figured it
was a temporary issue for that architechture, but clearly it's a wider
proble
On 12/12/2011 09:32 PM, Marcus Osdoba wrote:
>> as i said before, that does not matter.
> Accepted. I ignored the mounting errors - but the hostname stays empty
> and I (and possibly other uers, too) expect a valid hostname inside the
> container.
no; for the last time.. hostname does get set.
>
reassign 651891 src:nvidia-graphics-modules
retitle 651891 [nvidia] soft lockup in _nv014253rm
quit
Hi,
Grzegorz Andruszkiewicz wrote:
> Version: 3.1.1-1
[...]
> I was using KDE, 2 browsers, some other applications. At the time it actually
> hanged there was no-one sitting at the computer.
Than
tags 650726 + pending
thanks
New init file attached, test it if you like to.
Thanks,
Eduard.
#! /bin/sh
### BEGIN INIT INFO
# Provides: apt-cacher-ng
# Required-Start:$local_fs $network $remote_fs
# Required-Stop: $local_fs $network $remote_fs
# Should-Start: bind9
# Default
X-Debbugs-Cc: Alexander Reichle-Schmehl , Julien
Cristau
Dear Alexander and Julien,
Please accept my apologies for uploading just now without incorporating
yoru recent changes. I had not seen your NMU uploads because they came
via the BTS system to debian-science-maintainers, a very high traffi
Package: njam
Version: 1.25-5
Justification: user security hole
Severity: grave
Tags: security
*** Please type your report below this line ***
The setgid(games) binary /usr/games/njam makes insecure use of the
environmental variable SDL_VIDEODRIVER.
This potentially allows the execution of arb
Package: cups-client
Version: 1.5.0-12
Severity: normal
As normal user:
helge@sneo:~$ lpstat
FS-1020D-86 helge 47788032 Mo 12 Dez 2011
21:37:01 CET
FS-1020D-87 helge 7391232 Mo 12 Dez 2011
21:54:45 CET
As root:
root@sneo:~# lpstat
Speicherzugriffsfehle
Make that 384 MB of ram. :)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
2011/12/12 Luca Falavigna :
> What about grub2?
>
> # Broken Build-Depends:
> grub2: libnvpair-dev
> libzfs-dev
Those Build-Depends were removed in 1.99-13.
--
Robert Millan
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? C
retitle 651426 ITA: libpuzzle
owner !
thanks
Hi Andreas,
On Thu, Dec 08, 2011 at 04:01:40PM +0100, Andreas Metzler wrote:
[...]
> libpuzzle is maintained in the pkg-phototools GIT repository. Cyril
> Brulebois who did all the maintainer uploads had to reshuffle his
> priorities in January:
> htt
What about grub2?
# Broken Build-Depends:
grub2: libnvpair-dev
libzfs-dev
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
--On Monday, December 12, 2011 10:54 PM +0100 Julien Cristau
wrote:
On Mon, Dec 12, 2011 at 13:35:50 -0800, Quanah Gibson-Mount wrote:
OpenLDAP was compiled using 5.1.25, and the libs were updated to
5.1.29. OpenLDAP *must* be recompiled against 5.1.29 as well in that
case. If that is done,
On Mon, Dec 12, 2011 at 13:35:50 -0800, Quanah Gibson-Mount wrote:
> OpenLDAP was compiled using 5.1.25, and the libs were updated to
> 5.1.29. OpenLDAP *must* be recompiled against 5.1.29 as well in that
> case. If that is done, then everything will move along happily.
>
> This is by design bec
Hi again Elke,
Also, please make the change I described earlier in this bug thread and let
me know whether or not this fixes your problem.
(The change is to add a "resolvconf -u" to the initscript just after
"resolvconf --create-runtime-directories".)
--
Thomas
> Do you happen to know which platforms fall into this category?
FreeBSD 4.x is the one, according to ZooKeeper Programmer's Guide.
http://zookeeper.apache.org/doc/trunk/zookeeperProgrammers.html#C+Binding
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
On Mon, Dec 12, 2011 at 11:25:01AM -0500, Jon Daley wrote:
> Package: apt-cacher
> Version: 1.7.2
> Severity: normal
> Tags: patch
>
> I've been running apt-cacher with xinetd, and made my own
> /etc/xinetd.d/apt-cacher:
> service apt-cacher
> {
> disable = no
> type
Hi there and thanks very much for the additional information.
The mere absence of a file /etc/resolv.conf is not a bug. This is an
allowed situation if there is no nameserver information; the resolver does
not require the file to be present.
But from the fact that you are reporting here I infer
I occasionally see the same on Thinkpad X220 too. You don't need to
shut down the machine in that case, pressing Ctrl-C is sufficient to
interrupt udev and continue to boot. And I see the same messages about
killing stuck modprobe, will confirm next time it happens.
Best regards,
--
Jurij Smak
We are currently giving out loans to any part of the world at 2% interest rate.
If interested, send your name, Resident country and Phone number to Mrs.Kady
Hogan with the email address bellow eloandeskdptu...@ozledim.net or call:
+447045798621
Regards
Mrs.Kady Hogan
--
To UNSUBSCRIBE, ema
> "MB" == Michael Biebl writes:
MB> On 12.12.2011 19:32, Anders Boström wrote:
>> Package: network-manager
>> Version: 0.9.2.0-1
>> Severity: important
>>
>> Hi!
>>
>> network-manager replaced my working /etc/resolv.conf file with an file
>> looking like this:
>>
>> eckert:~# ca
Package: osmosis
Version: 0.39+ds1-6
Followup-For: Bug #650617
Changing the path on /etc/osmosis/plexus.conf solves the problem
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Lin
Package: cupt
Version: 2.3.1
Severity: important
Hello.
Following example should probably end with a mistake, not a failure.
example:
#cat /etc/cupt/preferences.d/iotop
Package: iotop
Pin: release n=lenny
Pin-Priority: 100
#cupt policy iotop
.
terminate called after throwing
Package: wnpp
Severity: wishlist
* Package name: pyew
Version : 2.0-1
Upstream Author : Joxean Koret
* URL : http://code.google.com/p/pyew/
* License : GPL-2
Programming Lang: Python
Description : a Python tool like radare or *iew for malware analysis
--On Sunday, December 11, 2011 12:14 PM +0100 "stor...@club-internet.fr"
wrote:
Package: slapd
Version: 2.4.25-4+b1
Severity: important
Dear Maintainer,
I think that the openldap package was not compiled with the last
version :
bdb_back_initialize: BDB library version mismatch: expected Berk
Package: ngircd
Severity: wishlist
Tags: l10n patch
Please include the attached Danish ngircd translations.
joe@joe-desktop:~/over/debian/ngircd$ msgfmt --statistics -c -v -o /dev/null
da.po
da.po: 10 oversatte tekster.
bye
Joe
da.po
Description: Binary data
--On Monday, December 12, 2011 1:29 PM -0800 Quanah Gibson-Mount
wrote:
--On Sunday, December 11, 2011 12:14 PM +0100 "stor...@club-internet.fr"
wrote:
Package: slapd
Version: 2.4.25-4+b1
Severity: important
Dear Maintainer,
I think that the openldap package was not compiled with the last
Package: resolvconf
Version: 1.62
Followup-For: Bug #651801
Dear Thomas,
I have the same issue as Teodor:
After a reboot my wireless interface is up and working but
/etc/resolv.conf points to /run/resolvconf/resolv.conf, which does not
exist.
After a reboot the layout of /etc/resolvconf/ is
#
On Vi, 09 dec 11, 22:59:34, Andrei Popescu wrote:
> On Mi, 03 aug 11, 11:26:53, Andrei POPESCU wrote:
> > On Ma, 02 aug 11, 00:07:03, Andreas Beckmann wrote:
> > > On 2011-06-20 09:24, Andrei POPESCU wrote:
> > > >>> Sorry, my stable install is i386 and I switched the sid install as
> > > >>> well
n Mon, 2011-12-12 at 19:28 +0100, malnati wrote:
> I'm printing to a shared (SMB) windows printer using CUPS.
> If I export the uxf file to other file format (pdf, png, svg, ...) I
> can print the generated file using other application. Can you suggest
> me a java based application to test?
Freemi
A time limit for reproducibility, unless someone else affected by
the same bug arrives. Help tracking this bug down and getting it in
upstream hands would be welcome.
--- Begin Message ---
> Forwarding to the bug log.
...sorry, I wasn't sure about spamming the log. I'm not familiar with the
BTS-
Package: cupt
Version: 2.3.1
Severity: normal
Hi.
Pinning is not supported package, using the host name.
example:
#cat /etc/cupt/preferences.d/iotop
Package: iotop
Pin: origin "ftp.pl.debian.org"
Pin-Priority: 1
#cupt policy iotop
...
iotop:
Installed: 0.4.4-1~bpo60+1
Preferred: 0.
Package: cupt
Version: 2.3.1
Severity: normal
Hello.
When you add the option "-a" to get the error.
$cupt show -a 'gnash*'
...
E: unable to find the binary package 'gnash*'
E: error performing command 'show'
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.38-bpo.2
I’m seeing this too on my ThinkPad X201i. The kernel I’m
running is linux-image-3.1.0-1-686-pae version 3.1.1-1.
It happens quite frequently, most often when first booting in the
morning; forcing a shutdown and trying booting again usually results
in a normal boot.
If there’s some debug output I
tag 624516 pending
thanks
Date: Fri Jul 1 20:58:53 2011 +0200
Author: Paul Gevers
Commit ID: 7a1fa4a2b1d0034fc4548d309d5bc6ae00c10d4a
Commit URL:
http://git.debian.org/?p=pkg-cacti/cacti.git;a=commitdiff;h=7a1fa4a2b1d0034fc4548d309d5bc6ae00c10d4a
Patch URL:
http://git.debian.org/?p=pkg-cacti/ca
Package: klipper
Version: 4:4.4.5-7+squeeze1
Severity: normal
*** Please type your report below this line ***
I can reproduce the same problem here.
Removing klipperrc or restarting klipper does not help.
Shortcuts for klipper, however, work: so it seems to work otherwise.
-- System Informatio
1 - 100 of 312 matches
Mail list logo
