Bill
Have you considered one of the PVC teak and holly products. I just did my
sole with Lonseal. I think it took 20 years off the age of my boat. The
next owner will curse me when it comes time to replace as I screwed new
plywood down prior to laying the Lonseal.
Mike
S/V Persuasion
C
send you a couple of pics off
line. If you do decide to go this route let me know and I'll help you avoid
some of my pit falls.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Message-
From: Dave Godwin
Sent: Friday, November 8, 2013 5:20 PM
To: cnc-list@cnc-list.
.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
;http://www.avast.com/>
This email is free from viruses and malware because avast!
Antivirus<http://www.avast.com/>protection is active.
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.
Fred
I used these guys a couple of years ago for my ‘85 Hillerange. Very helpful.
Sent me the parts I needed and gave me a credit for the old part when I mailed
it back to them.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Frederick G Street
Sent: Wednesday, December 18, 2013
Bottoms have 3 holes
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Message-
From: jtsails
Sent: Sunday, January 5, 2014 6:11 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Edd's bikini request
I know I'm a little late here, but spent the weekend on the b
Dave
I did this shortly after I purchased Persuasion. I installed a vertical
windlass and had to cut a hole in the anchor locker cover but the base
installation could be the same for you. I didn't secure the mounting
bracket to the bulkhead although it is against the bulkhead. Here is
It’s that time of year again. Is anybody going to the TO boat show?
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
__
> This List is provided by the C&C Photo
> Albumhttp://www.cncphotoalbum.comcnc-l...@cnc-list.com
>
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
>
Ron
I've been stepping and un-stepping my mast for 30 years. Since '05 on
Persuasion. And just to add some fun I have to thread the needle because
the mast is held with Spartite. If you have your owners manual it will
show you where to pick the mast up. I'm about 2 ft
about a month and I am very satisfied.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Curtis
Sent: Wednesday, January 8, 2014 3:22 PM
To: cnc-list@cnc-list.com
Subject: Stus-List GPS Laptop or tablet set up for BVI Charter?
I'm going to charter in the BVI in April. They tell me
ing to move the mast half mile down a busy street
Thanks again,
Dave Folsom
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
--
Mike
S/V Persuasion
C&C 37 K/CB
__
his List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
--
Mike
S/V Persuasion
C&C 37 K/CB
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
Does anyone have any experience with hand crank generators. Something with
a USB connection with or without a battery. I'm thinking of getting on and
throwing it in the ditch bag with a gps, tablet and maybe a cell phone.
Thanks
--
Mike
S/V Persuasion
C&
Stus-List Installing Refrigeration on a C&C 35 Mk3Jake
Please post the video on youtube. I’ve always wondered what was in there
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Jake Brodersen
Sent: Friday, January 24, 2014 5:23 PM
To: cnc-list@cnc-list.com
Subject: Re: S
Let me see in I understand you.
You admit that you were in the wrong
You admit that you were advised of the return policy
And you say it’s not about the money
There’s an old adage “penny wise and pound foolish” that comes to mind
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Josh Muc
Jake
Thanks for the photos. I’m sure my set up is the same.
Has anyone in the group tried to apply spray foam in the voids between the
icebox and stove and icebox and hull.
Thanks
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Jake Brodersen
Sent: Thursday, February 6, 2014 6:1
Dan
Question 2
I wired mine into the house side of the 4 position switch with appropriately
sized wire and a fusible link. If I may make a comment your alternator is a
weigh too small. You need at least 100 amp output with an external smart
regulator.
Good luck
Mike
S/V Persuasion
C&
I think you forgot mosquito season!
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Frederick G Street
Sent: Tuesday, May 21, 2013 4:12 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Launch!
Actually, local wits like to say we either have two seasons (Winter and Road
Construc
disclaimers)
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Don Jonsson
Sent: Thursday, May 23, 2013 9:00 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Overheating 3GMD - the plot thickens
Hi
I had previously sent out a message about an overheating diesel. The culprit,
so I tho
HMP in Toronto had stanchions and bases when I need them, but if South Shore
has them then that is the place to go.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Joel Aronson
Sent: Saturday, May 25, 2013 1:23 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List C&C 35 MKII
T
Edd
My board has been up for about 5 years now (stuck some how and to lazy to find
out why). Prior to that I lowered it rarely, perhaps in a stiff blow. I don’t
miss it, then again I’m not a racer.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Edd Schillay
Sent: Thursday, Ma
yea I suffered from a couple of bouts of 11 foot itis, myself
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Chuck S
Sent: Wednesday, May 29, 2013 11:08 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Bigger Boat Question
Good questions. You'll do fine finding a good boat
Has any one applied Plasdeck or a similar product to their cockpit sole. I’m
contemplating doing a DIY install. Can anyone advise about any pitfalls I
might encounter?
Thanks
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault___
This List is prov
Any one have any experience with a Kiwi prop? I been thinking about one for a
couple of years now. The reviews seem to say they are good for a couple of
years then they start to fail, pins or something.
Any comments would be appreciated good or bad.
Thanks
Mike
S/V Persuasion
C&C 37 Kee
time the
Admiral pulls out a storage bin with decorations and low and behold there is
the missing mike. I can laugh now but it wasn’t funny at the time.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Richard Walter
Sent: Sunday, June 23, 2013 9:53 PM
To: cnc-list@cnc-list.com
Sub
. For
piece of mind I get someone to look at it.
It’s kind of ironic that after years of stalling your channel finally gets
dredged and you ground your boat on the spoils. Hopefully the rock in the
middle is gone.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Bob Hickson
Sent: Mo
HAPPY CANADA DAY!!!
and
HAPPY INDEPENDENCE DAY on July 4th for all our friends south of the border.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
but you’ll need a chest of gold!!
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Stevan Plavsa
Sent: Friday, July 12, 2013 10:06 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List C&C 37+ Overhead Panels
Ken that is really nice, count me among the impressed. I've been thi
I trust that the pump was set in the right position. This happened to me once
(OK maybe more) and I found the pump set to flush and as we were sailing the
bowl filled up.
Good luck
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Peter Delean
Sent: Thursday, July 11, 2013 7:56 AM
To:
Dave
I’m just sitting back listening to everyone rant about their boat knowing full
well that I have the best boat on the planet.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Dave Godwin
Sent: Wednesday, July 10, 2013 11:20 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Be
marina has free wifi.
I’ll be around there from this Sat to the 16th Aug. Give me a shout on ch 16
and maybe we can meet up.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Stevan Plavsa
Sent: Thursday, July 25, 2013 9:10 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Toronto to the Thou
C&C for making an
extra heavy cockpit sole.
So does anyone know where I can source a flat head 1/2” X 6” (5” would work)
aluminum bolt. If a pinch I would use a stainless.
Thanks
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault___
This
yea it has a slotted head. If I could find some 1/2” aluminum ready rod or a
hex head bolt I could probably shape it into a flat head and slot it with a
hacksaw.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Chuck S
Sent: Friday, July 26, 2013 7:41 AM
To: cnc-list@cnc-list
Steve
Thanks for the suggestion. I called them and they have aluminum hex bolts. So
a little filing and it should work.
Isn’t this list awesome!!
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Steve Thomas
Sent: Friday, July 26, 2013 8:40 AM
To: cnc-list@cnc-list.com
Subject
Thanks Graham
I’ve already order a hex head. I do a little filing and maybe cut a slot with
the hack saw.
Sitting a the Brockville Yacht club. Thousland Island tomorrow...yea
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Graham Collins
Sent: Friday, July 26, 2013 6:06 PM
To:
Let the games begin!!!
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Russ & Melody
Sent: Saturday, July 27, 2013 3:40 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List 35-1 galley down light
Hi Dennis,
Try a different approach to the problem... pour the Admiral another glass
bcXEqh6M%3Bhttp%253A%252F%252Fww2.justanswer.com%252Fuploads%252Famdhcds%252F2012-06-11_231053_impact-screwdriver.jpg%3Bhttp%253A%252F%252Fwww.justanswer.com%252Fhonda%252F6s24d-07-honda-pilot-front-brake-rotor-off.html%3B640%3B480
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Dr. Mar
Edd
I replaced all of my overhead panels with FRP. It’s used for shower stalls and
comes in 4’ X 8’ sheets. It is extremely white so much so I had to paint all
of the head liner with Interlux Brightside blu-glow white. Pictures available
is you want.
Mike
S/V Persuasion
C&C 37 Keel/CB
Ok, I re-worked the picture size so hopefully it will go through. The panels
are FRP from Home Depot and the paint is Interlux Brightside blu-glow white.
Light is temporary until I find something I like. A friend made the mast wrap.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From:
As always Google has the answer.
http://workshopcompanion.com/KnowHow/Design/Nature_of_Wood/3_Wood_Strength/3_Wood_Strength.htm#strengthchart
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Steve Thomas
Date: 6 August, 2013 19:15:01 EDT
To:
Subject: Re: Stus-List C&C 30 m
over the cowl vent so
I cannot access it from the inside.
Thanks
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
Every fall we haul our boats out up here in the great white north. I always
fill mine then treat. Usually hauled for 7 months. Never had a fuel issue
yet. touch wood
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Eric Frank
Sent: Sunday, August 11, 2013 7:05 PM
To: cnc-list
Try 2 adults and 4 kids under 10 on/in a Helsun 22 poptop. At night all of
the bags of clothing and cooler went to the cockpit. Daytime reverse the
process. If I recall that little piece of heaven lasted 1 week.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Mes
. All hale the great butyl
tape!!
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: cenel...@aol.com
Sent: Friday, August 23, 2013 12:30 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Sky-liners
My 1995 36 XL/kcb has a 'sky liner' also--and it has a few leaks or at least
I believe the proper spelling is LABOUR Day. ;)
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Message-
From: Wally Bryant
Sent: Monday, September 2, 2013 11:12 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List two helms?
Double your pleasure, double your fun,
d the "Campbell
Sailor" appears to have good reviews. My preference is a 3 blade fixede as
I will be doing extensive cruising next year.
Does anyone have any experience with a Campbell sailor prop. I would
especially like to here from other 37 footers.
Thanks
--
Mike
S
. For movie night I swing it
out into the salon so there are no cheap seats. If you want I could take a pic
and send it to you.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Chuck S
Sent: Sunday, October 13, 2013 1:39 PM
To: cnc-list CNC boat owners
Subject: Stus-List TV bracket
Chuck
I’ll send you a couple off list.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Chuck S
Sent: Monday, October 14, 2013 11:04 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Fw: TV bracket
Yes, I'd like to see a picture of your arrangement thanks.
Chuck
Resolute
199
armchair sailing. Eventually I’ll load Active
Captain but I’m not sure how useful it will be in Canada
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Fair, Mike
Sent: Wednesday, February 19, 2014 12:05 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Navigation Software
7;s no reason," she says loudly. "What if your mom was a crappy
hockey player, and your dad was a crappy hockey player? Would that mean
that you're a crappy hockey player too?" A pause, and a smile. Then, says
Kristen, "Nope! That'd mean I'm an American!"
--
Mi
__
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
> _______
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
--
Mike
S/V Persuasion
C&C 37 K/CB
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
CC-1701-B
City Island, NY
Starship Enterprise's Captain's
Log<http://enterpriseb.blogspot.com/>
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
--
Mike
S/V Persuasion
C&C 37 K/CB
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
gt; keel has its advantages, especially for cruising. And, a next owner would
> not need to continually inspect and possibly repair the cable.
>
>
>
> Upwind performance is the biggie. But, in less than 10, I
> find the boat runs slower VMG than with the board up. And in Western LI
> Sound, we
Great
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Stu
Sent: Saturday, March 8, 2014 5:56 PM
To: C&C Email List
Subject: Stus-List Owners database
Some of the preliminary work has been done on the NEW owners database. The
registration is complete and waits for your comm
Fred
Out of courisity what is wrong with your unit.
Sent from my Xperia™ tablet
Original Message
Subject: Re: Stus-List Autopilot under the deck for C&C 38 Landfall
Sent: Mar 12, 2014 5:15 PM
From: davidrisch75
To: CNC CNC
Cc:
___
This
Sorry about that. Also I just read what I wrote and for clarification I am
talking about the autopilot and am not interested in lubrication
Sent from my Xperia™ tablet
Original Message
Subject: Re: Stus-List FW: Re: Autopilot under the deck for C&C 38 Landfall
Sent: Mar 12, 2014 6:39
Have a look at Campbell Sailer
Sent from my Xperia™ tablet
Original Message
Subject: Stus-List Propeller Suggestions?
Sent: Mar 13, 2014 7:04 AM
From: "Dr. Brian C. Morrison"
To: cnc-list@cnc-list.com
Cc:
___
This List is provided by the C
Jim
Can you reach maximum rpm. If not you are over prop'd if you over revyou are
under prop'd. I'd start there.
Mike
PERSUASION
C&C 37 K/CB
Long Sault
Sent from my Xperia™ tablet
Original Message
Subject: Stus-List Prop adjustments and cruising speeds
Sent: Ma
1 #83
Mandeville, LA
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
--
Mike
S/V Persuasion
C&C 37 K/CB
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
difficult. Comments? Opinions? Experiences?
John McLaughlin
C&C29 Mark II
"Falcon"
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
--
Mike
S/V Pers
When I finally got fed up with Poly-Glow I tried Poly-prep to remove it to no
avail. Good old Easy Off oven cleaner did a great job. Spray it on watch foam
turn yellow hose it off. Be careful though it is caustic and can cause a nasty
burn.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long S
-List@cnc-list.com
>>>>
>>>> ___
>>>> This List is provided by the C&C Photo Album
>>>> http://www.cncphotoalbum.com
>>>> CnC-List@cnc-list.com
>>>>
>>>
>>>
>&
experience this and how did you over come
it. The engine is a 3HMF.
Thanks
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
If you can call it sailing.
https://www.youtube.com/watch?v=IzGCYaJbf0A
--
Mike
S/V Persuasion
C&C 37 K/CB
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
Murray
> 16 Richards Dr.
> Unit 53 Maplewood Dr
> RR#2, Tiverton, ON, CA.,
> N0G 2T0
> Phone – 1-519-708-0787
>
> Thanks
> Stu
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
>
m
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
--
Mike
S/V Persuasion
C&C 37 K/CB
___
This List is provi
I would
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Bill Coleman
Sent: Monday, April 21, 2014 5:00 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Ice Box seal...
I put it on in the middle of 2012. Still going strong. Would you like to see
pictures of it in action?
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
--
Mike
S/V Persuasion
C&C 37 K/CB
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
I thought the polar vortex was sitting over Alaska. At least that is what I
thought and kept saying those darn Americans are screwing up my weather and my
launch.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long S
registered vessels.
http://wwwapps.tc.gc.ca/Saf-Sec-Sur/4/vrqs-srib/m.aspx?lang=e
Mike
S/V Persuasion
C&C 37 Keel C/B
From: Knowles Rich
Sent: Wednesday, March 20, 2013 2:49 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Boat registration
That is a license number. A registered vessel just
Registration is not free. In ‘06 it cost $250.00
Mike
From: dwight veinot
Sent: Wednesday, March 20, 2013 2:19 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Boat registration
I was talked into registering my boat by some government people at their booth
at the Halifax Boat show a few y
Hey Fellow C&Cers
Thinking about my next boat project. I'm looking for advise on an AIS
transponder. I'm thinking about a Class B. Anyone been down this road
that can help?
Thanks
--
Mike
S/V Persuasion
C&C 37 K/CB
___
This L
Sorry for not putting a subject in my original post.
Joel
Did you buy a separate VHF splitter or an independent antenna.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Joel Aronson
Sent: Friday, March 22, 2013 6:40 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List (no subject)
Bo
Thanks to those that responded. I’m now convinced I want an AIS. The problem
is which one. It will be connected directly to the pc chart plotter. The
Raymarine, Garmin and SiTex (new to me) all look promising.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Joel Aronson
Sent: Fr
want a transponder or just a receiver? If just a receiver, consider a
VHF radio with AIS. I have a one interfaced with my chart plotter.
Also having an AIS can give a false sense of security. Not all vessels have
AIS.
Dennis C.
Sent from my iPhone
On Mar 25, 2013, at 7:13 AM, "Persu
-List Fw: (no subject) now AIS
I can’t think of any bad units, but those are not the cheapest ones out there.
Any reason you are not looking at the others? Do you need a display on the unit
itself?
Joe Della Barba
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Persuasion
Fred
I had the Admiral call Defender today and order the Si Tex transceiver and
splitter. First time shopping at Defender and it looks like it won’t be the
last as they even honoured their weekend price (usual disclaimers).
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Frederi
Fred
When I gave up on PolyGlo we used Easy Off oven cleaner to remove it completely.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Fred Hazzard
Sent: Friday, March 29, 2013 12:19 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Poly Glo removal
I am needing to remove stained Poly
Terry
When we purchased Persuasion the name was painted on and we used Easy Off oven
cleaner for that job too. We did not sand but if I remember correctly we used
a polishing compound. What was interesting was that the gel coat appeared to
be thicker where a paint was. I chalked it up to UV
scrub brush on a
handle.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Fred Hazzard
Sent: Friday, March 29, 2013 2:43 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Fw: Poly Glo removal
Sam,
Contrary to Poly Glo recommendations I used Poly Glo on the decks. Over time
We had no luck with poly prep.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Message-
From: Colin Kilgour
Sent: Friday, March 29, 2013 5:14 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Poly Glo removal
Polyprep works too...
On 3/29/13, Gary Nylander wrote:
Try
KY
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert
Abbott
Sent: April 10, 2013 6:35 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Question
Background on the question..replaced
KY
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert
Abbott
Sent: April 10, 2013 6:35 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Question
Background on the question..replaced the muf
you know
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: dwight veinot
Sent: Wednesday, April 10, 2013 7:41 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Fw: Question
Kentucky what??
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret&#
I used FRP from HomeDepot
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Message-
From: Jake Brodersen
Sent: Friday, April 12, 2013 6:17 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Adhesive
Joel,
I painted the bare plywood. Looks great after five years. I
Fred
After some recommendations from this list I downloaded “what’s where” and I am
impressed. You can import a drawing of your boat, add labels to various
locations and then build a data base. It is freeware though you can donate if
you desire.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long S
What’s where by cinnamon
http://www.cinnamonsoftware.com/whats_where.htm
Have fun
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: David Knecht
Sent: Friday, April 19, 2013 10:13 AM
To: Persuasion
Subject: Re: Stus-List Fw: Stowing stuff on your boat
I can't find software by
were marked 1 US
quart well now they are 750 ml. all for the same price as last year. Way to go
Interlux you got a 20% mark up on your product and it cost you nothing.
Buyer beware!
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault___
This List is prov
Replacement washers and buttons are available at Home Depot
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Pat Nevitt
Sent: Wednesday, April 24, 2013 11:40 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List removing headliner access panels
Take a thin blade pocket knife and sli
You are ahead of us. Ours go in Saturday.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Ken Heaton
Sent: Monday, April 22, 2013 5:18 PM
To: cnc-list
Subject: Re: Stus-List Fwd: the day after...
Ah yes, but here in Sydney, Nova Scotia we're at 46° N, 60° W. Actually, the
Now Bill tell us what you really think
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Bill Bina
Sent: Tuesday, April 30, 2013 10:58 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Spinlock Clutches
I would visit a gypsy psychic and have tea leaves read before I would cons
arrived
shortly. He is a veterinarian. A couple of sips of wine and three staples she
was as good as new.
Naw; nobody teased her about going to a vet
Mike
S/V Persuasion
C&C 37 K/CB
From: Dennis C.
Sent: Friday, August 31, 2012 7:43 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-
electric fuel pump and I’m looking for recommendations. Any
particular make/model, gph, etc.
Mike
S/V Persuasion
C&C 37 K/CB ___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
oil after every 250 hours of operation.
Mike
S/V Persuasion
C&C 37 K/CB
From: Pat Nevitt
Sent: Friday, September 07, 2012 2:49 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Transmission oil
Is it necessary to use a marine grade oil in the transmission of a Yanmar? For
the engine I always
an electric one as a
spare.
Thanks again;
Mike
S/V Persuasion
C&C 37 K/CB
From: Martin DeYoung
Sent: Friday, September 07, 2012 8:29 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Fuel pump
Mike,
I did not see any reply specific to Yanmar fuel pumps but here is what I used
Intrelux Brightside Blue Glo White.
IMHO the shiny stipple texture of the FRB with the blue glo white certainly
lightened up the salon.
Mike
S/V Persuasion
C&C 37 K/CB
Stormont Yacht Club
http://www.stormontyachtclub.ca/
From: Joel Aronson
Sent: Tuesday, November 13, 2012 1:43 PM
To: cnc-list
Anybody with a 37 would know. For that matter anybody with a 35 would know
also.
Mike
S/V Persuasion
C&C 37 K/CB
Stormont Yacht Club
http://www.stormontyachtclub.ca/
-Original Message-
From: Pete Shelquist
Sent: Monday, November 19, 2012 9:51 PM
To: cnc-list@cnc-list.com
Sub
bed...
> URL:
> <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20140502/e39816e0/attachment-0001.html>
>
> Tom Buscaglia
> SV Alera
> C&C 37+/40
> Vashon Island WA
> (206) 463-9200
> www.sv-alera.com
>
>
Dennis
I highly doubt that you are 7 of 9. And no I don’t want a picture of you in
spandex
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Dennis C.
Sent: Friday, May 2, 2014 1:57 PM
To: Persuasion ; CnClist
Subject: Re: Stus-List List
We are the "listers". You will
1 - 100 of 103 matches
Mail list logo
