Don Give Martin a call a Port Whitby Marine Supply. He’s a great guy. He has been able to get me Yanmar parts when no one else could. When I sailed out of Whitby he was my go to guy. Now I still call him when I need parts and he does mail order. I find his price very reasonable. (usual disclaimers)
Mike S/V Persuasion C&C 37 Keel/CB Long Sault From: Don Jonsson Sent: Thursday, May 23, 2013 9:00 PM To: cnc-list@cnc-list.com Subject: Stus-List Overheating 3GMD - the plot thickens Hi I had previously sent out a message about an overheating diesel. The culprit, so I thought, was the knuckle going into the mixing elbow, because generally when I cleaned it, it worked again. For a while. So I finally took of the mixing elbow and gave everything a proper cleaning. I checked the water pump. I checked all hoses by blowing through them and the engine. I put it all back together and it all worked and water pumped like it is supposed to, except the water pump leaked a bit – needed a new gasket, but I knew that and just wanted to see if it would work. Got a new gasket and put it on. Started up and no water. I took out the thermostat and checked to see it worked – slightly corroded but it worked, i.e. opened in hot water. Put everything back together and started it up and a bit of water but too much steam. Took the thermostat out and put it in more carefully. Tried again, water running, no steam everything is perfect. Ran it for a while just to be sure. Turned it off. Waited a while (an hour) and started it up again. No water. So the problem is not the mixing elbow (and likely never was as it wasn’t that bad). Not the pump as it looks fine. Not the thermostat – I don’t think although I will replace it. The problem is sometimes the engine pumps water and sometimes not. And I’m stumped. This is a raw water cooled engine which makes things different. Has anyone had a similar problem and ideas for a solution. Also, it seems hard to get part numbers for a 3GMD and the local mechanic had to go find an old book. Is there any place online to find part numbers for that engine? Thanks to anyone that can help. Don -------------------------------------------------------------------------------- _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
