Joel I’ve replaced the access panels on my headliner with 1/8” FRP that can be bought at Home Depot in 4 X 8 sheets. Used the old panels as templates. I tried attaching a couple of panels with velcro. Didn’t like the look. Too thick. Next I tried screws like the originals were attached. Admiral didn’t like. Tried a couple of panels with 4200 and screws. Had to remove these panels to get rid of the screws. Admiral’s order. I found the 4200 to be very effective. Next spring all panels will be secured with 4200 only. To dress up the headliner itself I painted that with Intrelux Brightside Blue Glo White. IMHO the shiny stipple texture of the FRB with the blue glo white certainly lightened up the salon.
Mike S/V Persuasion C&C 37 K/CB Stormont Yacht Club http://www.stormontyachtclub.ca/ From: Joel Aronson Sent: Tuesday, November 13, 2012 1:43 PM To: cnc-list@cnc-list.com Subject: Stus-List Headliner access panels Several of the panels have delaminated. 1/4 inch plywood would be too thick. Is there a better replacement? Has anyone either re-used the vinyl or found a replacement? What glue would you use? Thanks! -- Joel 301 541 8551 -------------------------------------------------------------------------------- _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
