Re: Stus-List Keel Fairing

Zinc chromate applied to sanded metal helps the next layer to adhere. -Original Message- From: "Wally Bryant via CnC-List" Sent: ‎2014-‎05-‎01 2:39 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List Keel Fairing I'm assuming it's a lead keel. I did spot repairs on my lead keel in 20

Re: Stus-List Spring prep

If it ain't broke don't fix it. Are you sure it needs attention? -Original Message- From: "M Bod via CnC-List" Sent: ‎2014-‎05-‎02 2:15 PM To: "C&C list" Subject: Stus-List Spring prep This spring is challenging - the weather is just starting to warm up. Hopefully this weekend I can

Re: Stus-List Cool change and Oregon Offshore Race

Smart decision. -Original Message- From: "Alan Bergen via CnC-List" Sent: ‎2014-‎05-‎10 7:43 PM To: "C&C Photoalbum email list" Subject: Re: Stus-List Cool change and Oregon Offshore Race I received this email from Frank, this morning: As you know, we decided not to race in the Oregon

Re: Stus-List Butyl rubber

I buy it from apple auto glass. Its windshield installation tape. -Original Message- From: "via CnC-List" Sent: ‎2014-‎05-‎18 9:14 PM To: "cnc-list@cnc-list.com" Subject: Stus-List Butyl rubber Hello all A few years back I think I read a post from someone who claimed that

Re: Stus-List water pump impeller

We use vaseline on Firefly.. Second impeller in 20 years. -Original Message- From: "Marek Dziedzic via CnC-List" Sent: ‎2014-‎05-‎28 8:13 AM To: "cnc-list@cnc-list.com" Subject: Stus-List water pump impeller I have a quick question: what do you use to lube the impeller to let it survive

Re: Stus-List C&C 24 rudder question

Do you dry it out over the winter? If no, try a moisture meter to check. My 27 has drain plugs I installed to dry out over the Ontario winter.. -Original Message- From: "Ed Dooley via CnC-List" Sent: ‎2014-‎06-‎04 5:00 PM To: "cnc-list@cnc-list.com" Subject: Stus-List C&C 24 rudder que

Re: Stus-List Repositioning Mast

Don't forget a lucky coin! -Original Message- From: "Dennis C. via CnC-List" Sent: ‎2014-‎06-‎04 8:56 PM To: "Stevan Plavsa" ; "cnc-list@cnc-list.com" Subject: Re: Stus-List Repositioning Mast Steve, Others have given you good advice. Just count the turns on the shrouds as you loose

Re: Stus-List C&C 24 rudder question

t winter, 5 winters in a row since I've bought the boat. A moisture meter implies gouging a hole through the fiberglass. Is that what you're suggesting? Ed On Jun 4, 2014, at 7:21 PM, John Irvin via CnC-List wrote: Do you dry it out over the winter? If no, try a moisture meter to check.

Re: Stus-List Windows

Tooth paste works. -Original Message- From: "Charlie Nelson via CnC-List" Sent: ‎2014-‎06-‎11 12:41 PM To: "colt...@verizon.net" ; "cnc-list@cnc-list.com" ; "bstrat...@falconnect.com" Subject: Re: Stus-List Windows My windows don't leak but they are significantly 'crazed' (?) so that t

Re: Stus-List Black mold spots on teak interior

Mr Clean magic eraser? -Original Message- From: "Jerome Tauber via CnC-List" Sent: ‎2014-‎06-‎17 2:43 PM To: "cnc-list@cnc-list.com" Subject: Stus-List Black mold spots on teak interior Anyone have a recommendation for a product to remove black mold spots from interior teak. Seems to

Re: Stus-List Alternator? Belt? Suggestions?

It never hurts to change the belt -Original Message- From: "Edd Schillay via CnC-List" Sent: ‎2014-‎07-‎31 3:15 PM To: "Josh Muckley" Cc: "C&C List" Subject: Re: Stus-List Alternator? Belt? Suggestions? Josh, I’ll head out there this weekend (weather permitting), change the belt (it

cnc-list@cnc-list.com

Well done Stu. I'll be a candidate sooner rather than later. -Original Message- From: "Ed Dooley via CnC-List" Sent: ‎2014-‎08-‎02 12:45 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List Eye can see a C&C Congratulations Stu! Ed On Aug 2, 2014, at 9:49 AM, "Stu" wrote: Late last

Re: Stus-List Thoughts on repowering with outboard

Me three on that. The A4 is overall the best answer. -Original Message- From: "Gary Nylander via CnC-List" Sent: ‎2014-‎08-‎04 3:07 PM To: "Paul and Darlene Clarke" ; "cnc-list@cnc-list.com" Subject: Re: Stus-List Thoughts on repowering with outboard Looking at all the wonderful $5-700

Re: Stus-List follow-up on outboards

Good thing the border is close for most boat owners. -Original Message- From: "Peter Fell via CnC-List" Sent: ‎2014-‎08-‎05 1:58 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List follow-up on outboards It’s my understanding that Moyer won’t ship large items like blocks and rebuilt

Re: Stus-List Replacing Rub Rail - Landfall 35

Vim or some cleaner with a bit of grit works on the rubrail and also on dirty fenders. -Original Message- From: "Robert Boyer via CnC-List" Sent: ‎2014-‎08-‎06 1:08 PM To: "CnC-List@cnc-list.com" Subject: Stus-List Replacing Rub Rail - Landfall 35 I have a Landfall 38 and I replaced a

Re: Stus-List block lubricant

Or Captain Phab -Original Message- From: "Pete Shelquist via CnC-List" Sent: ‎2014-‎08-‎13 1:46 PM To: "cnc-list@cnc-list.com" Subject: Stus-List block lubricant We just finished a week long distance race series and during the race I noticed that the blocks that we lube with T-9 become

Re: Stus-List Rigid vang

Very pleased with my Garhauer vang for racing and cruising. -Original Message- From: "Dr. Mark Bodnar via CnC-List" Sent: ‎2015-‎09-‎29 5:33 PM To: "cnc-list@cnc-list.com" Cc: "Dr. Mark Bodnar" Subject: Stus-List Rigid vang Thinking about projects for the boat. I definitely need a new

Re: Stus-List Deisel Fuel Additives?

Available in US auto parts stores. Doesn't ship across the border. -Original Message- From: "Russ & Melody via CnC-List" Sent: ‎2015-‎10-‎14 10:18 PM To: "cnc-list@cnc-list.com" Cc: "Russ & Melody" Subject: Re: Stus-List Deisel Fuel Additives? Seafoam reminds me of the Marvel Mystery

Re: Stus-List Boat tools

Forget duct tape. The new "Gorilla Tape" has made it obsolete. Comes in clear for sail repair, too. -Original Message- From: "Josh Muckley via CnC-List" Sent: ‎2015-‎12-‎08 5:21 PM To: "C&C List" Cc: "Josh Muckley" Subject: Re: Stus-List Boat tools 10 in 1 screw driver. Does large an

Re: Stus-List C&C shirts

Sure would love XL if someone could pick up. Contact me off list of it can be managed. -Original Message- From: "Dave Godwin via CnC-List" Sent: ‎2016-‎01-‎08 10:28 AM To: "cnc-list@cnc-list.com" Cc: "Dave Godwin" Subject: Re: Stus-List C&C shirts I have one of those in my closet som

Re: Stus-List C&C nameplate envy

No sniffing! -Original Message- From: "Joel Aronson via CnC-List" Sent: ‎2016-‎01-‎16 4:10 PM To: "cnc-list@cnc-list.com" Cc: "Joel Aronson" Subject: Stus-List C&C nameplate envy With all the discussion about new nameplates I decided to clean up my aluminum plates that are about 2 x

Re: Stus-List Boom vanging...

Same feelings on Garhauer. -Original Message- From: "wwadjo...@aol.com via CnC-List" Sent: ‎2016-‎01-‎28 1:51 PM To: "cnc-list@cnc-list.com" Cc: "wwadjo...@aol.com" Subject: Re: Stus-List Boom vanging... Garhauer. Call and they will walk through sizing, etc. Bill Walker Sent from my

Re: Stus-List Mystery Coolant

I generally leave RV or plumbing antifreeze in the bilge, but I'm in frozen Ottawa. -Original Message- From: "Ryan Doyle via CnC-List" Sent: ‎2016-‎01-‎29 2:00 PM To: "cnc-list@cnc-list.com" Cc: "Ryan Doyle" Subject: Re: Stus-List Mystery Coolant Joe and Joel - thank you guys. Apolo

Re: Stus-List Mystery Coolant

You need antifreeze for winter storage in climates which freeze. Plumbing antifreeze is fine as it's biodegradable. -Original Message- From: "Joseph Bognar via CnC-List" Sent: ‎2016-‎01-‎30 2:18 PM To: "cnc-list@cnc-list.com" Cc: "Joseph Bognar" Subject: Re: Stus-List Mystery Coolant

Re: Stus-List Old C&C factories on Google Street View

Or open a ski area! -Original Message- From: "Bill Coleman via CnC-List" Sent: ‎2016-‎02-‎01 7:35 PM To: "cnc-list@cnc-list.com" Cc: "Bill Coleman" Subject: Re: Stus-List Old C&C factories on Google Street View The saying goes, “ If you want to make a small fortune, take a large for

Re: Stus-List Made an offer on a C&C 35 mk2

Echo Steve's comments. Firefly's A4 is 40 years old. Still reliable as hell. Marvel Mystery Oil gets some of the credit Mid-range fuel is better now that there's no lead.. -Original Message- From: "Stevan Plavsa via CnC-List" Sent: ‎2016-‎02-‎03 3:32 PM To: "cnc-list@cnc-list.com" Cc:

Re: Stus-List Butyl tape

I buy mine from Apple Auto Glass -Original Message- From: "Mike Amirault via CnC-List" Sent: ‎2016-‎02-‎09 4:39 PM To: "cnc-list@cnc-list.com" Cc: "Mike Amirault" Subject: Re: Stus-List Butyl tape I bought my Butyl tape at in industrial supplier in Dartmouth, NS, Arrow Construction. I

Re: Stus-List 35-3 stern boarding ladder

A good friend made me teak steps to go on the standard 27 ladder. Big improvement and they look great. -Original Message- From: "Jake Brodersen via CnC-List" Sent: ‎2016-‎02-‎17 8:16 PM To: "cnc-list@cnc-list.com" Cc: "Jake Brodersen" Subject: Re: Stus-List 35-3 stern boarding ladder

Re: Stus-List Gori 2 Blade Re-fit

If you are close enough Bayview Propeller in Lakefied ON does rebuilds. -Original Message- From: "J Roger via CnC-List" Sent: ‎2016-‎03-‎02 9:10 AM To: "CnC-List@cnc-list.com" Cc: "J Roger" Subject: Stus-List Gori 2 Blade Re-fit Hi..I have a 12 x 9 LH Gori with the gears for my C&C 27

Re: Stus-List Email List or Forum

I'd stay with the list, Stu You never know what you're going t learn and it's easy to delete what doesn't interest you. I am grateful for the every time I access it. Many thanks. -Original Message- From: "Dennis C. via CnC-List" Sent: ‎2015-‎03-‎13 6:16 PM To: "Stu" ; "CnClist" Subje

Re: Stus-List Email list, etc

Gracious thanks, Stu. -Original Message- From: "Stu via CnC-List" Sent: ‎2015-‎03-‎17 9:06 PM To: "cnc-list@cnc-list.com" Subject: Stus-List Email list, etc Just a brief update on the list and other items: 1. There will NO Facebook, Twitter or other social networking URL associated wit

Re: Stus-List C&C ball caps

I have a guy here in. Ottawa I have dealt with for years. He did a terrific job on our crew shirts and he has done hats for several regattas I have been involve with. Should I check him out? -Original Message- From: "Bill Bina - gmail via CnC-List" Sent: ‎2015-‎03-‎18 3:11 PM To: "cnc-l

Re: Stus-List First aid kit

Check with a friendly doctor who sails if you know one. Lots of variable needs depending where you are sailing and for how long. -Original Message- From: "Marek Dziedzic via CnC-List" Sent: ‎2015-‎03-‎26 7:42 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List First aid kit I would r

Re: Stus-List running wire for chart plotter etc

I changed to a more robust pedestal guard and installed extra wiring for eventual needs. Made sense to me. -Original Message- From: "Jean-Francois J Rivard via CnC-List" Sent: ‎2015-‎03-‎31 1:08 PM To: "cnc-list@cnc-list.com" Cc: "lumg...@hotmail.com" Subject: Stus-List running wire f

Re: Stus-List Tiller on C&C 35 Mkiii?

Lucky man! -Original Message- From: "David Castor via CnC-List" Sent: ‎2015-‎04-‎16 6:02 PM To: "robert" ; "cnc-list@cnc-list.com" Subject: Re: Stus-List Tiller on C&C 35 Mkiii? Rob, Thanks for that link - I'll definitely take a look. We own a little trailer sailor at present (Pott

Re: Stus-List rig tuning

Doing the doctor route again. Maybe later. -Original Message- From: "Josh Muckley via CnC-List" Sent: ‎2015-‎04-‎28 10:47 AM To: "C&C List" ; "Pete Shelquist" Subject: Re: Stus-List rig tuning Most insurance policies have blanket statements stating something to the effect of, "Vessel

Re: Stus-List Antifreeze Mystery

Sounds like leaky impeller gasket. -Original Message- From: "robert via CnC-List" Sent: ‎2015-‎05-‎26 10:12 AM To: "cnc-list@cnc-list.com" Cc: "robert" Subject: Stus-List Antifreeze Mystery Burt: If you are referring to the 'water pump' on the front of the engine, that is not where t

Stus-List Edson Pedestal

Someone posted on this topic a while ago. If anyone still has it I would appreciate a copy or a reference Thanks, posters. -Original Message- From: "Bill Bina via CnC-List" Sent: ‎2015-‎05-‎28 6:22 PM To: "cnc-list@cnc-list.com" Cc: "Bill Bina" Subject: Re: Stus-List AirBnB boat

Re: Stus-List Edson Pedestal

it our tech support web pageor contact Edson: By Email: i...@edsonintl.com By Phone: (508) 995-9711 Chuck Resolute 1990 C&C 34R Broad Creek, Magothy River, Md From: "John Irvin via CnC-List" To: cnc-list@cnc-list.com Cc: "John Irvin" Sent: Thursday, May 28, 2015 8

Re: Stus-List Universal Engine panel wiring

Sure glad I have an Atomic 4! -Original Message- From: "Josh Muckley via CnC-List" Sent: ‎2015-‎08-‎11 12:27 PM To: "C&C List" Cc: "Josh Muckley" Subject: Re: Stus-List Universal Engine panel wiring I checked the specs of the universal glo-plugs and they average 2 ohms. This equates

Re: Stus-List Adjustable Genoa Cars

I have had Garhauer for years. Great product. -Original Message- From: "Tom Buscaglia via CnC-List" Sent: ‎2015-‎08-‎22 1:16 PM To: "cnc-list@cnc-list.com" Cc: "Tom Buscaglia" Subject: Stus-List Adjustable Genoa Cars Any thoughts on adjustable cars. Like, are they all that? Also, whi

Re: Stus-List Adjustable Genoa Cars

Me three! -Original Message- From: "William Walker via CnC-List" Sent: ‎2015-‎08-‎23 11:53 AM To: "cnc-list@cnc-list.com" Cc: "wwadjo...@aol.com" Subject: Re: Stus-List Adjustable Genoa Cars I have garhauer. I like their products. Bill Walker Sent from AOL Mobile Mail On Satu

Re: Stus-List boat names

I like Born to Run -Original Message- From: "Tom Lynch via CnC-List" Sent: ‎2015-‎09-‎17 2:50 PM To: "cnc-list@cnc-list.com" Cc: "Tom Lynch" Subject: Re: Stus-List boat names Danny, I've been struggling with a rename for over a year: On the song name theme, some names I'm consider

Re: Stus-List 2GM20F Engine will not start - Possible Fuse Issue.

Corrosion? -Original Message- From: "Brad Crawford via CnC-List" Sent: ‎2014-‎08-‎15 12:55 AM To: "'Martin DeYoung'" ; "cnc-list@cnc-list.com" ; "'Raymond Macklin'" Subject: Re: Stus-List 2GM20F Engine will not start - Possible Fuse Issue. I had a similar issue this last weekend. We m

Re: Stus-List How to paint small surfaces on deck?

I have seen ads for gelcoat in a spray can. -Original Message- From: "Sébastien Lemieux via CnC-List" Sent: ‎2014-‎08-‎17 12:32 PM To: "cnc-list@cnc-list.com" Subject: Stus-List How to paint small surfaces on deck? Hello everyone, I made a few repairs on my deck (changed rope clutche

Re: Stus-List [Bulk] Re: Ok more atomic 4 issues...dammit!

Our club has switched to premium because the newer outboard require it. -Original Message- From: "David Drake via CnC-List" Sent: ‎2014-‎08-‎18 12:18 PM To: "Russ & Melody" ; "cnc-list@cnc-list.com" Subject: Re: Stus-List [Bulk] Re: Ok more atomic 4 issues...dammit! The importance. Of

Re: Stus-List [Bulk] Re: Ok more atomic 4 issues...dammit!

MARVEL MYSTERY OIL -Original Message- From: "Wally Bryant via CnC-List" Sent: ‎2014-‎08-‎18 5:43 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List [Bulk] Re: Ok more atomic 4 issues...dammit! you wrote: > It is a Shell station that he pointed me to I've always enjoyed searching for

Re: Stus-List Sailing Totem - "(C&C's) Keels Falling Off!"

Could there have been incidents with new ones.? 110,99,etc. -Original Message- From: "Danny Haughey via CnC-List" Sent: ‎2014-‎08-‎20 1:23 PM To: "rickbr...@earthlink.net" ; "cnc-list@cnc-list.com" Subject: Re: Stus-List Sailing Totem - "(C&C's) Keels Falling Off!" Fk*n Wally... That

Re: Stus-List Re-chrome Barient 27 ST?

Get them knurled. -Original Message- From: "Don Harben via CnC-List" Sent: ‎2014-‎09-‎11 5:58 PM To: "cnc-list@cnc-list.com" Subject: Stus-List Re-chrome Barient 27 ST? My two Barient 27 ST winches work very well, however the chrome on the drum shows that! Has anyone been successful ha

Re: Stus-List sailing under jib alone

I often go jib only when shorthanded. You lose a little point on the 27-3 but that's all. -Original Message- From: "Joel Aronson via CnC-List" Sent: ‎2014-‎09-‎19 12:04 PM To: "cnc-list@cnc-list.com" Subject: Stus-List sailing under jib alone All, Earlier this week I went out for a l

Re: Stus-List C&C30MK1 windows and hatch replacements

I have a 27 Mk lll. Replaced windows with 1/4 in Plexiglas held in place by double.-sided butyl tape. Foolproof. -Original Message- From: "Dr. Mark Bodnar via CnC-List" Sent: ‎2014-‎09-‎23 1:28 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List C&C30MK1 windows and hatch replacements

Re: Stus-List Hi, Just bought a 1985 C&C 41

Use Marlow rope here slippery. -Original Message- From: "Rex & Jennifer Delay via CnC-List" Sent: ‎2014-‎11-‎13 7:39 PM To: "cnc-list@cnc-list.com" Subject: Stus-List Hi, Just bought a 1985 C&C 41 Recently bought a 41 with full knowledge that there were some issues, mainly with the ri

Re: Stus-List Using 12v trickle charger to test components?

I also use mine to power the blender on Margarita Weekend! -Original Message- From: "Marek Dziedzic via CnC-List" Sent: ‎2014-‎11-‎24 11:53 AM To: "CNC boat owners, cnc-list" Subject: Re: Stus-List Using 12v trickle charger to test components? For testing i usually use a "power in a buc

Re: Stus-List Dribble

I wear contacts for distance and have dollar store backups everywhere. -Original Message- From: "Marek Dziedzic via CnC-List" Sent: ‎2014-‎12-‎20 12:06 AM To: "'D Harben'" ; "cnc-list@cnc-list.com" Subject: Re: Stus-List Dribble The only sure way is to have a full set in every potentia

Re: Stus-List Dorade

I have used white plastic plumbing elbows successfully. -Original Message- From: "Peter Derviller via CnC-List" Sent: ‎2014-‎12-‎27 2:06 PM To: "cnc-list@cnc-list.com" Subject: Stus-List Dorade Hello all: this is my first post on cnc-list. I carelessly knocked a vent overboard. Does an

Re: Stus-List Port light Gaskets Material

Double-sided butyl tape is the way to go -Original Message- From: "Peter via CnC-List" Sent: ‎2015-‎01-‎18 8:48 PM To: "cnc-list@cnc-list.com" Subject: Stus-List Port light Gaskets Material My boat has spent the last few off-seasons on the hard in Mexico. Last time I was there one of

Stus-List Magazines

I am a huge fan of Sailing Magazine___ This List is provided by the C&C Photo Album. Please donate to the C&C Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubsc

Re: Stus-List Cunningham

I have one on my 27-3 -Original Message- From: "David Paine via CnC-List" Sent: ‎2015-‎01-‎25 6:32 PM To: "cnc-list@cnc-list.com" Subject: Stus-List Cunningham Hi All, I'm buying a new mainsail and I am going to ask a ridiculous-sounding question. Do you have a Cunningham grommet i

cnc-list@cnc-list.com

Look at the Mirage 24. It's essentially the same boat. -Original Message- From: "Marek Dziedzic via CnC-List" Sent: ‎2015-‎02-‎04 7:21 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List C&C24 Actually, it seems that there were multiple versions of that arrangement. The original C&C 2

Re: Stus-List Window Installation - 1985 41

Still a fan of double-sided butyl tape. . -Original Message- From: "John and Maryann Read via CnC-List" Sent: ‎2015-‎02-‎08 12:02 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List Window Installation - 1985 41 Rex This is a topic of MUCH discussion over the years. Suggest you che

Re: Stus-List Garhauer Rigid Boom Vang

Just go with the appropriate new Garhauer. -Original Message- From: "Peter Fell via CnC-List" Sent: ‎2015-‎03-‎02 7:24 PM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List Garhauer Rigid Boom Vang An update The seller posted up a price ... $400 !!! I discussed it with him, armed with

Re: Stus-List Stove

Alcohol stove fires can easily be extinguished with water Surely a plus. -Original Message- From: "Bill Bina - gmail via CnC-List" Sent: ‎2015-‎03-‎06 11:55 AM To: "cnc-list@cnc-list.com" Subject: Re: Stus-List Stove You would have also discovered that many insurance companies will not

Re: Stus-List Fuel conditioners

I swear by it. Have used it in the Atomic 4 as long as I have had my boat. Hard to get in Canada but readily available in US auto stores. Moyer even recommends it. Sent from my iPhone On Jun 18, 2017, at 12:55 PM, svpegasus38 via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hi all, My new (t

Re: Stus-List engine shut-off t-handle repair or replacement

Start with Ottawa Fasteners on ROBERTSON Rd Sent from my iPhone On Jun 19, 2017, at 7:42 PM, Marek Dziedzic via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hello, My t-handle on the engine shut-off has some broken threads. When I pulled the handle to turn off the engine, it stayed in my ha

Re: Stus-List Winch handle holder

Try the Chandlery in Ottawa _ on line. Sent from my iPhone On Jul 6, 2017, at 12:48 PM, Joel Aronson via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Its metal: http://www.defender.com/product3.jsp?name=suncor-winch-handle-holder&path=-1|118|2358547|2358553&id=1611093 On Thu, Jul 6, 2017 a

Re: Stus-List 25MKII, Tiller Length

Extensions are a good solution. More flexibility. Sent from my iPhone On Jul 10, 2017, at 4:47 PM, David Kaseler via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hi. Good plan. My guess is the Anytiller guys know the original specks. Did you ask? We, on our 33 mark 1 bought a longer stock ti

Re: Stus-List 1986 C&C 44 balsa core isolated or not

I'm surprised the surveyor doesn't know most of these answers himself. Sent from my iPhone On Jul 10, 2017, at 4:10 PM, Dan via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Regarding the 1986 C&C 44 I'm buying: My surveyor got back to me having done only the moisture meter readings on the h

Re: Stus-List traveller track/cars Harken vs others

My experience is if you plan to race, go Harken. Sent from my iPhone On Jul 12, 2017, at 6:55 PM, Dennis C. via CnC-List mailto:cnc-list@cnc-list.com>> wrote: When looking at "ball bearing" traveler and genoa car systems (as opposed to pin stop or slide track), design is a factor. While some

Re: Stus-List 80' C&C 30 Smile Photo

My experience, 20+ years with a 27-3, is to fill with a flexible compound, not something firm like epoxy. The boat flexes, you need to allow it to do so. Sent from my iPhone On Jul 21, 2017, at 11:03 AM, Chris Hobson via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Forgot the photo! https:/

Re: Stus-List New owner, 1980 C&C 30' MK1, SV "Going"

Good attitude -good luck! Sent from my iPhone On Jul 26, 2017, at 3:50 PM, svpegasus38 via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I felt the same 2 months ago when I bought my LF39. I had almost finished upgrading my other boat, a LF38. When my neighbor comes up to my girlfriend and s

Re: Stus-List Refit for a 1981 Landfall 38

So far I have not seen anything about rigging - inspections, checks, replacement? Sent from my iPhone On Aug 1, 2017, at 12:58 PM, Hoyt, Mike via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Paul I looked at your engine rebuilt post. What a daunting job! Great work Mike Persistence Halif

Re: Stus-List Refit for a 1981 Landfall 38

Sounds like you are on top of things. Bon voyage! Sent from my iPhone On Aug 1, 2017, at 9:11 PM, john wright via CnC-List mailto:cnc-list@cnc-list.com>> wrote: That was great and helpful. Thank Dave On Aug 1, 2017, at 6:35 AM, Dave S via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Inspec

Re: Stus-List Southern Nova Scotia

Don't miss Mahone Bay. Sent from my iPhone On Aug 18, 2017, at 1:32 PM, Dan via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Mahone Bay is a joy, but old town Lunenburg has lots of good food, shops, museums and history to check out. You will want to see "The Ovens" - look it up on google. I

Re: Stus-List Learning to sail in a small boat

Very good points. Windsurfing will substitute nicely for mall boat sailing. Sent from my iPhone On Aug 29, 2017, at 9:26 PM, Neil Andersen via CnC-List mailto:cnc-list@cnc-list.com>> wrote: For what it's worth, many of the sailing schools that I have heard of start novices out in Catalina/Capr

Re: Stus-List Garhauer Genoa Cars

Add me to the last st of very satisfied customers - vang, cars on a C&C 27-III. Sent from my iPhone On Aug 30, 2017, at 10:11 AM, Gary Russell via CnC-List mailto:cnc-list@cnc-list.com>> wrote: It was posted a while ago, that Garhauer Marine no longer sells ball bearing jib cars but only sold

Re: Stus-List A4 Cutting Out

Check the fuel bowl for sediment. Sent from my iPhone > On Sep 18, 2017, at 10:30 AM, Randal Stafford via CnC-List > wrote: > > Listers- > > I’m having a problem with my Atomic 4, and hoped you might have some thoughts > to share. > > When I went out for a sail yesterday, she started right

Re: Stus-List Garhauer Story...

Thanks for posting this. Sent from my iPhone On Sep 18, 2017, at 10:47 AM, David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: So I have been volunteering at the Marion-Bermuda Race for the past 10 years or so and the booth that is located right across from ours is Garhauer. I would see

Re: Stus-List question about a C&C 30 mkii keel

I believe that the secret to a successful smile repair is to use a filling compound which flexes. The keel flexes under sail and hard fillers eventually crack, have to be routed out. Firefly (27-111) uses marine goop successfully in fresh water. Good luck! Sent from Mail

Re: Stus-List C&C 35-3 Rudder Drain Holes

We drain the rudder on the 27-3 as follows. Make 3 drain holes, one high up on the trading edge of the rudder, one 3-4 inches from the tip, and one on the bottom of the rudder. We drilled 1/4 in holes and then tapped them to accept hex-head cap screws. Water comes out in the fall, cold weather t

Re: Stus-List To Rod Stright

I got it. Sent from my iPhone On Oct 22, 2017, at 12:38 PM, Greg Sutherland via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I did Mike. Greg On Oct 22, 2017, at 1:20 PM, Persuasion37 via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Did everyone get this email. Mike PERSUASION C&C 37 K/

Re: Stus-List C&C 30 MKII - Winter or Spring anti-fouling/bottom job?

Firefly-C&C27-3 is in fresh water. We sand for smoothness and touch up. Not a full cover every season. Sent from my iPhone On Oct 23, 2017, at 12:07 PM, Ronald B. Frerker via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Do you need a complete bottom job? Each time I repaint the bottom, I wet

Re: Stus-List Fundraising results

Couldn’t agree more with Bill’s comments. Sent from my iPhone On Oct 26, 2017, at 1:20 PM, Bill Bina - gmail via CnC-List mailto:cnc-list@cnc-list.com>> wrote: We lived through this discussion a long time ago at very great length. We do not need to re-litigate it again. We were all originally

Re: Stus-List News story

My spider sense is tingling. Sent from my iPhone On Oct 26, 2017, at 7:57 PM, svpegasus38 via CnC-List mailto:cnc-list@cnc-list.com>> wrote: How do you get stranded on an "otherwise functional sailboat"? The engine is called auxiliary for a reason!! Just asking. Sent from my T-Mobile 4G LT

Re: Stus-List Adjustable Genoa Cars, 1994 C&C 37/40+

Did you include the track size? There are standard widths. You may have to change track . Sent from my iPhone On Dec 19, 2017, at 5:23 PM, Ken Heaton via CnC-List mailto:cnc-list@cnc-list.com>> wrote: The Genoa Tracks on our 1990 C&C 37/40 XL have line adjustable cars and are made by Harken U

Re: Stus-List Keel bolt torque

On the 27- mik III I just make sure the extension stays vertical. Not dealing with that much torque. Sent from my iPhone On Jan 15, 2018, at 10:44 AM, Dennis C. via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hopefully, I'm visualizing the situation correctly. The configuration I see is t

Re: Stus-List Battery Equalizer Solution?

Recommend it for batteries you can top up deep cycle or starting. Not snake oil in my experience. Sent from my iPhone > On Jan 26, 2018, at 3:17 PM, Lee Youngblood via CnC-List > wrote: > > Hi All, > > Any one used this Battery Equalizer solution? > https://www.batterystuff.com/battery-res

Re: Stus-List Best place to find what I need?

Garhauer are an excellent replacement parts source. Sent from my iPhone > On Feb 25, 2018, at 3:10 PM, Chuck Gilchrest via CnC-List > wrote: > > Sigrid, > Congratulations on your Landfall 35 purchase. > The closest thing to Catalina Direct would be South Shore Yachts in Niagra > on the Lak

Re: Stus-List Some Saturday morning reading.

Thank you for this post. Sent from my iPhone On Mar 9, 2018, at 10:01 PM, Ken Heaton via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Grab a coffee and get comfortable, here is a bit of Saturday morning reading for you. Below is a link to another of my occasional histories of remarkable C&C

Re: Stus-List Traveler fit?

Talk to Garhauer as well. Sent from my iPhone On Apr 14, 2018, at 11:55 AM, Chuck Saur via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hello from frozen Michigan. I am still spending my kids' inheritance on deck hardware. Question for 35-3 owners or others: Has anyone replaced the aging

Re: Stus-List Fresh Water Conversion Yanmar 3HM

Curiouser and curiouser, Alice. Sent from my iPhone On Apr 30, 2018, at 3:03 PM, John Conklin via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Following along !! I have the same 3HM in my new to me 1982 37 Having some Issues with overheating right now. There is an anti freeze tank and some

Re: Stus-List C&C crest

I would be up for crests or decals , too. Sent from Mail for Windows 10 From: CnC-List on behalf of Allan Hester via CnC-List Sent: Friday, May 11, 2018 10:54:23 AM To: cnc-list@cnc-list.com Cc: Allan Hester S

Re: Stus-List El Faro

Incredible story. Thanks for posting. Sent from my iPhone On May 27, 2018, at 5:50 PM, Stevan Plavsa via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Not C&C related, but certainly maritime related - dramatic story about the El Faro, a 1970s container ship that was lost at sea on October 1st

Re: Stus-List C&C 34 1981 Wet rudder - necessary to rebuild/replace?

Same problem on a 27 Mk III. What we do is have rain holes, one near the top of the rudder , one low down on the leading edge, one on the bottom. In sailing season we insert threaded plugs sealed with Vaseline to keep the rudder dry. They come out in the fall, a few drops leak out and the rudder

Re: Stus-List Barient 28 two speed self tailing winch bearings

Try taking it’s mate to a bearing supply and see if they can match it. Sent from my iPhone On Jul 4, 2018, at 4:42 PM, Glenn Gambel via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I decided to clean my Barient 28 two speed self tailing winches today. It was sunny and nice and I had been p

Re: Stus-List Removing old stickers

Try “Goof-Off” Sent from my iPhone On Jul 18, 2018, at 12:07 PM, Dennis C. via CnC-List mailto:cnc-list@cnc-list.com>> wrote: 3M stripe off wheel 07498 with mandrel in a drill. Dennis C. On Wed, Jul 18, 2018 at 10:59 AM, Charlie Nelson via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I hav

Re: Stus-List Wisper has launched!

Recommend you look at Garhauer for your bang. Sent from my iPhone > On Jul 28, 2018, at 2:08 PM, Nathan Post via CnC-List > wrote: > > Hi All, > > We finally have Wisper - our 1981 C&C 34 CB we purchased in May in the water! > Excited to take her for a first sail tomorrow from Scituate up t

Re: Stus-List Wisper has launched!

Read bang! Damn autocorrect! Sent from my iPhone > On Jul 28, 2018, at 2:44 PM, John Irvin via CnC-List > wrote: > > Recommend you look at Garhauer for your bang. > > Sent from my iPhone > >> On Jul 28, 2018, at 2:08 PM, Nathan Post via CnC-List >> wrote:

Re: Stus-List Wisper has launched!

Depends on boat size. Probably No 2, for a 35’ Boat Sent from my iPhone > On Jul 29, 2018, at 7:17 AM, John and Maryann Read via CnC-List > wrote: > > Congratulations Nathan. We have owned our 34 for 20 years and love it. It > sails like a dream. Regarding the rudder, we rebuilt ours and

Re: Stus-List How narrow a berth is too narrow

A foot either side is the norm in our harbour. Sent from my iPhone > On Aug 7, 2018, at 2:04 PM, Jeremy Ralph via CnC-List > wrote: > > I have an opportunity for a new slip an a highly desirable location. From > the edge of the finger to the neighboring boat is 12' and my beam is 11' not >

Re: Stus-List anyone see this mine?

Perfect. What time works? Remember it’s Labour Day. Sent from my iPhone On Aug 29, 2018, at 12:09 PM, Della Barba, Joe via CnC-List mailto:cnc-list@cnc-list.com>> wrote: https://www.seattletimes.com/seattle-news/unexploded-device-floating-in-puget-sound-off-bainbridge-island/ Yikes! __

  1   2   3   >