I was convinced my old Raritan water heater was leaking.after a
close inspection yesterday with the assistance of a mechanic familiar
with these issues, we concluded it was not leaking. The wooden platform
it sits on was dry, pressure valve outlet dry, valve to empty the tank
on the bottom
Does anyone have a source for marine grade euro style connectors like this:
https://focusattack.com/philmore-12-terminal-euro-style-18-20-awg-barrier-strip/
I find lots of non-marine grade but no tinned connectors.
--
Dennis C.
Touche' 35-1 #83
Mandeville, LA
__
not tinned, but they seem to hold up:
http://www.downwindmarine.com/Connector-Strips-Newmar-p-9147.html
Joel
On Wed, May 27, 2020 at 10:34 AM Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:
> Does anyone have a source for marine grade euro style connectors like this:
>
>
> https://fo
As I have said before, replace the relief valve. It opened occasionally on
my Raritan
Joel
On Wed, May 27, 2020 at 9:11 AM Robert Abbott via CnC-List <
cnc-list@cnc-list.com> wrote:
> I was convinced my old Raritan water heater was leaking.after a
> close inspection yesterday with the assis
I have found them on Amazon and FleaBay. I am not a huge fan, the quality is
variable. They are nice for experiments where you will be rearranging things.
Joe Della Barba Coquina C&C 35 MK I
www.dellabarba.com
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
via C
Joel,
There is a hose on my relief valve that directs any water from it to the
bilge.I will place a container under the hose to see if catches any
water.
Thanks for the tipwill let you know what happens.
Rob Abbott
AZURA
C&C 32- #277
Halifax, N.S.
On 5/27/2020 11:41 AM, Joel Aronson
If not, add food coloring to the tank. Easier to find the leak
On Wed, May 27, 2020 at 1:23 PM Robert Abbott via CnC-List <
cnc-list@cnc-list.com> wrote:
> Joel,
>
> There is a hose on my relief valve that directs any water from it to the
> bilge.I will place a container under the hose to see
Any one have experience pressing in a new seal in the 3gm raw water pump.
Thanks
Gerry Fianna 1985 35 MK3 ___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list
Gerry,
When pressing in a new lip seal there are a couple of things to look for.
first make sure the seal is orientated correctly, the open side (side with
spring) should face the liquid
second I use a socket that covers the seal completely, I invert the socket
and then insert an extension and driv
Rob,
You can use _water soluble markers_ to make lines in strategic places. If water
leaks over them, it will show.
Marek
-Original Message-
From: CnC-List On Behalf Of Robert Abbott via CnC-List
Sent: 27 May, 2020 09:11
To: cnc-list@cnc-list.com
Cc: Robert Abbott
Subject: Stus-List Ho
The pressure relief valves have a bad habit of leaking if they are opened up.
They seem not to want to seal completely again.
Marek
From: CnC-List On Behalf Of Robert Abbott via CnC-List
Sent: 27 May, 2020 13:23
To: cnc-list@cnc-list.com
Cc: Robert Abbott
Subject: Re: Stus-List Hot Water Heater
Marek,
In 15 years,I have never opened the relief valve and thanks for the
water marker tip.now I have to source it.
Rob Abbott
AZURA
C&C 32 - #277
Halifax N.S.
On 5/27/2020 5:24 PM, Marek Dziedzic via CnC-List wrote:
The pressure relief valves have a bad habit of leaking if they are
o
On 5/27/2020 11:41 AM, Joel Aronson via CnC-List wrote:
As I have said before, replace the relief valve. It opened
occasionally on my Raritan
Joel, question? Did the relief valve open occasionally only
when the engine was running with engine coolant heating the
water
Neil,
Video on replacing the HW Tank.and this guy had to take out the teak trim
around the locker...FYI.
https://www.youtube.com/watch?v=6vwlm4PMri4
Rob Abbott
AZURA
C&C 32-#277
Halifax, N.S.
On 5/26/2020 2:11 PM, neil.eric.ander...@gmail.com wrote:
Rob,
Boy is this familiar. I a
Any children's marker should do (most are supposed to be water soluble)
Marek
Original message
From: Robert Abbott via CnC-List
Date: 2020-05-27 17:58 (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: Robert Abbott
Subject: Stus-List Hot Water Heater
Marek,
In 15 years,I have never
The T&P (relief) valves are supposed to be tested on a certain frequency.
If you've never heard of water heater rocket launching you should look it
up. It happens as a result of the T&P getting clogged or stuck shut and
then the thermostat getting stuck on.
https://youtu.be/rGWmONHipVo
If they l
https://youtu.be/rGWmONHipVo
On Wed, May 27, 2020, 18:04 Robert Abbott via CnC-List <
cnc-list@cnc-list.com> wrote:
> On 5/27/2020 11:41 AM, Joel Aronson via CnC-List wrote:
>
> As I have said before, replace the relief valve. It opened occasionally
>> on my Raritan
>>
>>
>
> Joel, question? D
When inspecting chainplates prior to re-rigging (standing rigging), what
should I know about disassembling the bow chainplate and stemhead casting?
As that area reasonably serviceable? Stainless galling and oxide seizing
notwithstanding.
One chainplate has already been done and looked pristine. Pl
18 matches
Mail list logo
