Neil,

Video on replacing the HW Tank.....and this guy had to take out the teak trim 
around the locker...FYI.



https://www.youtube.com/watch?v=6vwlm4PMri4


Rob Abbott
AZURA
C&C 32-#277
Halifax, N.S.



On 5/26/2020 2:11 PM, neil.eric.ander...@gmail.com wrote:

Rob,

Boy is this familiar.  I am in the same boat (so to speak).  The lazarette doesn’t maintain the same size throughout its length, it gets narrower the farther aft you go.  I bought a 6 gallon from West Marine in the fal and am in the process of installation now.  The wood trim piece (attached be screws from underneath has to be remove and a little spreading force may ben needed to make it fit (1/4 of an inch (6-7 mm) or so ). The west Marin heater measures 13.5 inches square and the opening is “just” short of 13.5 inches at the most aft portion.

I’m going to give it a try this week and will let you know if I can make it happen.

Neil Andersen

S/V FoxFire

1982 C&C 32

Rock Hall, MD 21661


-----Original Message-----
From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Robert Abbott via CnC-List
Sent: Tuesday, May 26, 2020 9:36 AM
To: cnc-list@cnc-list.com
Cc: Robert Abbott <robertabb...@eastlink.ca>
Subject: Stus-List Hot Water Heater

My hot water heater needs replacing....the existing one is round, 14 inches in diameter.....it should just, I mean just, come out of the locker without dismantling it so the new one can be no bigger.

Can anyone with experience with hot water heaters recommend a replacement, specific model number?

Rob Abbott

AZURA

C&C 32 - #277

Halifax, N.S.

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and every one is greatly appreciated.  If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray


_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to