Per my questions a few days back, I've gotten some quotes on asymmetrical
spinnakers for Windstar- quite a difference between standard and made to
order. 'Standard' seems to involve 1.5 oz cloth (at i spinnakers and rolly
tasker) and MTO, recommended in my case at .75 oz. I have never owne
Dave, will you be using the kite in strong winds? Will you be using it a lot?
If the answers to both those questions is yes, then go with the heavier
material. But if you plan to use it while cruising to avoid having to turn the
engine on in light winds, then go for the .75.
My use is in lighter
We, often sailing in very light wind, just received a 'windseeker' sail.
Haven't tried it yet, because we had 8-10 on Wednesday (and won). The sail
is attached to the tack, hoisted on its own luff rope, and is high cut - out
of spinnaker cloth. It looks exciting. Our 155% genoa is just too heavy t
Our (Chesapeake) PHRF rules do state - must be attached to the mast, must be
less than J length without penalty. No hand holding a stick...
Gary
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
Jean-Francois J Rivard via CnC-List
Sent: Friday, August 5, 2016 8:03 PM
To: cn
It's time to replace the main and genoa on my 38 mk2 (and I actually have
the money to do it).
I'm more of a cruiser than a racer any more. I only do about 4 charity races
a year, and have been adding cruising gear to the boat for trips to the
Bahamas (and Bermuda next June). So I guess I'm loo
Try Ullman Sails in Deltaville. Jerry or Justin can help you. Good folks.
Pete W.Siren SongC&C 30-2Deltaville, Va. Message: 7
Date: Sat, 6 Aug 2016 11:45:34 -0400
From: "Rick Brass"
To: "Charlie Nelson" ,
Subject: Stus-List New sails for my 38
Message-ID: <000a01d1eff9$91f89e60$b5e9d
Hi Rick,
If you are comfortable with Chinese sailcloth you might want to contact
IslandPlanet http://islandplanetsails.com/ Island is out of Florida and
Peak Sails www.peaksailsna.com and Peak is out of Virginia (Closer to
you)
They seem to be a good compromise between the direct order f
I’ll second that recommendation. Although I haven’t bought any sails from them
I will be when the boat is put back together. I’ve seen their product up close
and in action, heard other recommendations and spoken with them.
Of course, by the time I need to purchase sails, most likely we’ll be usi
It's not as unreasonable as it sounds!
I saw in last month's issue of Cruising World that Ocean Passage
Opportunities is organizing several fleets to travel in company from the
east coast to St. Georges for the Americas Cup finals in Bermuda next June.
They seem to have a pretty good handle on
Listers-
My exterior handrail replacement project is underway - began removing the
handrails today. The bases of the exterior handrails were bedded to the
cabintop gelcoat with what appears to be some kind of silicone-like substance.
Can anybody recommend a good solvent for that stuff? I tried
Randy
The only thing I ever found to remove silicone was good old gasoline.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: RANDY via CnC-List
Sent: Saturday, August 6, 2016 3:51 PM
To: cnc-list
Cc: RANDY
Subject: Stus-List Solvent for Silicone
Listers-
My exterior handrail replacement
6].pdf
-Francois Rivard
1990 34+ "Take Five"
Lake Lanier, GA
-- next part ------
An HTML attachment was scrubbed...
URL:
<http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20160806/4beca40f/attachment-0001.html>
---
I haven't tried it but I saved this info from the list. " McKanica Silicon
calk remover"
Sent from my iPhone
> On Aug 6, 2016, at 3:51 PM, RANDY via CnC-List wrote:
>
> Listers-
>
> My exterior handrail replacement project is underway - began removing the
> handrails today. The bases of th
I use 3M 08984 General Purpose Adhesive Remover, a 5 in one knife and a
scrubby pad. There is no silver bullet for silicone removal. It takes
elbow grease.
http://www.oreillyauto.com/site/c/detail/MMM0/08984/N0440.oap
Dennis C.
On Sat, Aug 6, 2016 at 2:51 PM, RANDY via CnC-List
wrote:
> List
Hi Randy,
I've been using the MCKANICA Silicone Caulk Remover and have had very good
results. It dissolves the silicone quite well and it's very easy to remove.
It works in 10-15 minutes.
Mark McMenamy
C&C 25 "Icicle"
Fort Pierce FL
On Aug 6, 2016, at 3:52 PM, RANDY via CnC-List
mailto:cnc
DeBond
Harry
Sent from my iPhone 7 beta
> On Aug 6, 2016, at 15:51, RANDY via CnC-List wrote:
>
> Listers-
>
> My exterior handrail replacement project is underway - began removing the
> handrails today. The bases of the exterior handrails were bedded to the
> cabintop gelcoat with what app
they're quite rare, but I'm willing to sell mine; for a fair price.RonWild
CheriC&C 30-1STL
From: Tim Sippel via CnC-List
To: "cnc-list@cnc-list.com"
Cc: Tim Sippel
Sent: Friday, August 5, 2016 12:33 PM
Subject: Re: Stus-List Yanmar bolt size
You may need a metric
adjustable w
I have one but it's left handed.
Dennis C.
Sent from my iPhone
> On Aug 6, 2016, at 10:05 PM, "Ronald B. Frerker via CnC-List"
> wrote:
>
> they're quite rare, but I'm willing to sell mine; for a fair price.
> Ron
> Wild Cheri
> C&C 30-1
> STL
>
>
>
> From: Tim Sippel via CnC-List
> To:
Dennis; I 'll bet its part of a set of pliers and screw drivers.!!!
Lee 35-3 c/b
Blue Point NY
-Original Message-
From: Dennis C. via CnC-List
To: cnc-list
Cc: Dennis C.
Sent: Sun, Aug 7, 2016 1:11 am
Subject: Re: Stus-List Yanmar bolt size
I have one but it's left handed.
Dennis
Sitting in the cockpit of Alera looking out at Telegraph Harbor and the marina.
Last night of a great week end here for the 25th annual C and C northwest
Rendezvous. About 20 boats and twice that attendees. Great fun, great friends
and great food. All round great week end. Big shout out to
20 matches
Mail list logo
