Re: Stus-List Gooseneck fitting - now searching cnc list archives

Even better than the #2 method noted below, searching for content on a specific site would be done using the search string: rudder site:cnc-list.com See here: https://support.google.com/websearch/answer/2466433?hl=en From: Alan Liles via CnC-List Sent: Saturday, March 12, 2016 4:37 PM To: cnc-

Re: Stus-List Gooseneck fitting

I suggest check with Offshore spars, they are probably the manufacturer and have spare parts. Bruno lachance Becassine 33 mk II 87 New Richmond, Qc Envoyé de mon iPad > Le 12 mars 2016 à 12:22, Alan Liles via CnC-List a > écrit : > > Preparing to remove my rig, I found the gooseneck fitting

Re: Stus-List winch grease

My interpretation of what I have read is that it is not about the compatibility of the grease with the plastic (although that could be an issue), but more about how to effectively lubricate a plastic bearing. I think they are thinking about the stickiness of the grease (any grease) and suggest

Stus-List Searching the Photo Album archives

There are 2 functions on the Photo Album for searching: 1. Enter your search word and press go. This will search the Photo Album for any articles containing your search word. 2. Enter your search word and press go. This will search our email list archives for your search word. It doesn’t g

Re: Stus-List Gooseneck fitting

If I am understanding you correctly, I would think you could bore those holes slightly oversize, and squeeze in either a stainless tube bushing, or Nylon of Delrin bushing, which would make a much nicer bearing surface. Bill Coleman C&C 39 Erie, PA -Original Message- From: CnC-L

Re: Stus-List Wiring an inverter

Just a note here, I notice Del City is now handling a lot of Blue Sea inventory. http://www.delcity.net/productsearch?search=blue+sea&x=0&y=0&it=#search=blue %20sea&mpp=72 Don't know how their prices compare. Bill Coleman C&C 39 Erie, PA -Original Message- From: CnC-List [mailto:cnc-l

Re: Stus-List winch grease

When I worked at Edson, we used nylon caged stainless steel needle bearings in our pedestals, similar to what I’ve seen used in Lewmar and Barient winches. Our recommended lubricant was a Teflon based lubricant called Super Lube, available in small .3 oz tubes with an applicator nozzle or in 3o

Re: Stus-List winch grease

Remember that grease is simply an oil in a binder material. Most of the red greases are an oil (synthetic or petroleum) in a very fine clay binder (read kitty litter). When the oil migrates out of the binder, you are the left with a gooey mess. Other greases use a soap (lithium) binder. Bra

Re: Stus-List winch grease

I cleaned greased and oiled all of my winches (11 in total all Barient) with Harken Performance white winch grease and Harken pawl oil, rather pricey stuff for the amount you get...I was surprised at first to find some plastic rollers in some of these old winches but I guess that's normal. After ge

Re: Stus-List Wiring an inverter

Thanks - will definitely compare. Scary when you start to add up all the "little" pieces. It's going to be a fortune just in shrink terminals! John Sent from my iPad > On Mar 13, 2016, at 11:10 AM, Bill Coleman via CnC-List > wrote: > > Just a note here, I notice Del City is now handling

Re: Stus-List Searching the Photo Album archives

I was accessing the archive from the cncphotoalbum site. There are no search tools there. The Mail-Archive site is news to me, so, again, the List succeeds. Cheers, Al > On Mar 13, 2016, at 7:39 AM, Stu via CnC-List wrote: > > There are 2 functions on the Photo Album for searching: > > 1.

Re: Stus-List Wiring an inverter

John — I recently found an online supplier with what I think is the lowest prices on genuine Molex heat shrink crimp terminals: www.waytekwire.com You’ll easily save about half of what you'd spend buying Ancor-branded (but really Molex…) terminals at Waste Marine...

Stus-List Interesting Reading

Thanks to Dennis C., I have posted 2 new items on the Photo Album: a) Practical Sailor Used Boat Survey C&C 35 b) Redwing 35 Equipment List Check them out on the Main Page of the Photo Album. Stu___ Email address: CnC-List@cnc-list.com To change your

Stus-List redline41mk1

___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List winch grease

Hi Dwight As you know the tooth brush is a handy tool, but do you know the tooth brush was invented in Cumberland, a coal mining community on Vancouver Island? Yeah, if it was invented anywhere else it would have been called the teeth brush ba boom! Cheers, Russ Sweet

Re: Stus-List winch grease

I have always bought a hard tooth brush because my teeth were hard. Am I doing this wrong? Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 13 March 2016 at 20:18, Russ & Melody via CnC-List wrote: > Hi Dwight > > As you know the tooth brush is a handy tool, but do you know the tooth > br