Re: Stus-List Gori 2 Blade Re-fit

In case you didn't see this email, sent earlier in the thread: A friend has a 25 year old 2-blade Gori folding propeller on his C&C 35 Mk.I It had started unfolding incorrectly as the pins were worn enough to allow the gear teeth to occasionally skip. He took his to a local machine shop and they

Re: Stus-List solar power setup Cont...

David, No experience with a waterproof plug, but I once considered the idea and rejected because of aesthetic reasons with the routing of wires, chance of leaks, and the trip hazard on the foredeck. The solar panel that charges the battery under my V berth is deployed on the foredeck near the

Re: Stus-List solar power setup Cont...

I have about 30 feet of cord on my solar panel and use a trolling motor plug and socket in the cockpit. Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Thursday, March 03, 2016 12:15 PM To: cnc-list@cnc-list.com Cc: Rick Brass Subject:

Re: Stus-List solar power setup Cont...

I got a Blue Sea socket and plug and wired the plug to the panel and mounted the socket near my engine panel and ran that to a Sunsaver Duo controller in the lazarette and from there up to the battery compartment. I just plug in the panel before I leave the boat and unplug when I come back and

Re: Stus-List solar power setup Cont...

David, Is your 50W thin enough to leave on the companionway hatch when sailing? In other words, can it slide with the hatch forward? If so, what panel did you use? All the best, Edd Edd M. Schillay Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Cap

Re: Stus-List Window Replacement

Charlie; There is a solvent that will loosen the bond of 5200. IIRC it came out about 2 or 3 years ago. Probably a great demand among folks who have used 5200 for a permanent seal on something that should have not have been permanently mounted. If I’m not mistaken, you can buy the solvent at

Stus-List Need a Sheave for my Outhaul

I need a sheave for the Outhaul on my Redwing 35. The old sheave is Aluminum, OD 1 3/4" Dia X 1/4" thick with a 5/16" Dia ID. I have checked Rigrite's stock sized and they don't list one. I think I will call them to see if they have anything. The old sheave did not have a bushing when I took

Re: Stus-List Need a Sheave for my Outhaul

I used www.Zephyrwerks.com for replacement sheaves for Calypso’s Palmer / Johnson custom made spin sheet blocks. Zephyrwerks is based out of a small shop in Port Townsend WA. (My favorite PNW port even after they tore down the iconic Town Tavern, a scene of much of t

Re: Stus-List Need a Sheave for my Outhaul

Check APSLTD or Garhauer. Joel On Thu, Mar 3, 2016 at 2:20 PM, Martin DeYoung via CnC-List < cnc-list@cnc-list.com> wrote: > I used www.Zephyrwerks.com for replacement sheaves for Calypso’s Palmer / > Johnson custom made spin sheet blocks. Zephyrwerks is based out of a small > shop in Port Town

Re: Stus-List Need a Sheave for my Outhaul

+1 for Zephyrwerks! The will also make custom sheave pins machined to .01mm tolerances if needed. The Best!! Chuck Gilchrest Half Magic 1975 25Mk 1 (for sale!) Orion 1983 35 Landfall Padanaram MA Sent from my iPhone > On Mar 3, 2016, at 2:20 PM, Martin DeYoung via CnC-List > wrote: > > I use

Re: Stus-List solar power setup Cont...

Dave; any chance of see photos of your rig set up on the boat? Thanks Richard 1985 C&C 37 CB; Ohio River, Mile 596; Richard N. Bush 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -Original Message- From: David Knecht via CnC-List To: CnC CnC d

Stus-List Looking for wind generator parts

Does anyone have a 12 volt, Aerogen 6, they would like to get rid of? I am looking for a set of windings inside the body but would take an entire unit, with or without blades and tail, that I can use for parts. SailorJg Callisto C&C 35 Mk II, Victoria, BC ___

Re: Stus-List Gori 2 Blade Re-fit

1000 thank yous. Shop in the Kawarthas is a wee Jackpot..Finally, a craftsmen that is in the know. On Mar 3, 2016 8:02 AM, "Ken Heaton via CnC-List" wrote: > In case you didn't see this email, sent earlier in the thread: > > A friend has a 25 year old 2-blade Gori folding propeller on his C&C 35

Re: Stus-List Looking for wind generator parts

Rewinding a generator is not rocket science. There are probably a number of shops where you are that can burn the old windings out and rewind the stator. Then they would either drip or vacuum impregnate the windings for insulation. Look for electric motor repair shops (after all a generator is