Try Citri-Strip adhesive remover. I used it to remove sail number goo.
Joel
On Tue, Nov 22, 2016 at 5:16 AM, Damian Greene via CnC-List <
cnc-list@cnc-list.com> wrote:
> Thanks for the recommendation - and for what does not work. I see they
> have Good Off at Lowe's. I will try this in the Spri
Thanks for the recommendation - and for what does not work. I see they have Good Off at Lowe's. I will try this in the Spring.
Damian
___
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our c
We tried Goo Gone and contact cement solvent, and a few other things, the only
thing that worked was a product called Goof Off, bought at Canadian Tire.
Dampen a rag with it and hold it in place on the glue, it's takes a few minutes
to soften the original glue. Wear nitrile gloves and make very
On Sun, Nov 20, 2016 at 7:26 AM, Damian Greene via CnC-List <
cnc-list@cnc-list.com> wrote:
> Now - if someone could tell me what would work to remove the dried Velcro
> adhesive residue from my headliner?
Side grinder? Flame thrower?
Seriously, that stuff is tenacious. I used acetone and lo
st [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *ALAN
> BERGEN via CnC-List
> *Sent:* Saturday, November 19, 2016 11:47
>
>
> *To:* C&C
> *Cc:* ALAN BERGEN
> *Subject:* Stus-List Velcro Adhesive
>
>
>
> I'm replacing all of the ceiling access panels (
N BERGEN
Subject: Stus-List Velcro Adhesive
I'm replacing all of the ceiling access panels (1/8" plywood with cloth
covering) with FRP (fiberglass reinforced plastic). The existing ones are
screwed in. I want to use Velcro instead. What is the recommended adhesive
for this? Inp
headliner?
Damian Greene1982 C&C 34 GhostBass Harbor, Maine
From: Dennis C. via CnC-List
To: CnClist
Cc: Dennis C.
Sent: Sunday, November 20, 2016 5:43 AM
Subject: Re: Stus-List Velcro Adhesive
On Sat, Nov 19, 2016 at 10:18 PM, Lee Youngblood via CnC-List
wrote:
What do
On Sat, Nov 19, 2016 at 10:18 PM, Lee Youngblood via CnC-List <
cnc-list@cnc-list.com> wrote:
> What do you mean Snap In? Did you install snaps or maybe build a teak
> frame and stretch mosquito screen like a painting, and wedge it into the
> fiberglass liner somehow making it stay there?
Lee,
Alan, practical sailor reviewed hook and loop fasteners recently. Suffice
it to say, as with everything boat related, evolution happens... in a good
way. I was very impressed with the options available, some absurdly strong.
I will track it down and send to you.
Are you out tomorrow for the Sunday
OK Dennis,
What do you mean Snap In? Did you install snaps or maybe build a teak frame
and stretch mosquito screen like a painting, and wedge it into the fiberglass
liner somehow making it stay there? Surely you have some cleaver hocos-pocus
or little round head screws?
Please say master. .
Alan.
Isn't FRP "blasphemy" in a salon or so I thought that was the consensus when I
did mine. I tried the Velcro route and didn't like the look. Too bulky at the
edges. I used 4200 to secure the panels. So semi-permanent. I re-bedded
everything prior. Had to brace the panels in place unt
Try some 3M Command strips. They make some with hook and loop. I think
they may be the picture hanging strips. At the very least, the adhesive
will come off without staining.
I use 3M Command hooks in the galley to hang important things like bottle
openers. :) They've been attached to the cab
Before messing with glue, at least try the self-adhesive industrial Velcro. A
different breed, very tenacious.
Dave.
Message: 1
Date: Sat, 19 Nov 2016 09:03:59 -0800
From: Jim Watts
To: 1 CnC List
Subject: Re: Stus-List Velcro Adhesive
Message-ID:
Content-Type: text/plain; charset
, but I also don’t expect to remove the tape anytime
soon.
Hope that helps,
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of ALAN BERGEN
via CnC-List
Sent: Saturday, November 19, 2016 10:47 AM
To: C&C
Cc: ALAN BERGEN
Subject: Stus-List Velcro Adhesive
I'm repl
My panels are velcro'd all around and screwed in each corner. The velcro
that the PO used was the self-adhesive kind and it hasn't lasted well. It
also left sticky bits in all the wrong places as it failed, so it's
difficult to replace. If it was my choice, I would use a good quality
solvent-based
I'm replacing all of the ceiling access panels (1/8" plywood with cloth
covering) with FRP (fiberglass reinforced plastic). The existing ones are
screwed in. I want to use Velcro instead. What is the recommended
adhesive for this? Input from anyone who has first hand experience would be
appreci
16 matches
Mail list logo
