My panels are velcro'd all around and screwed in each corner. The velcro that the PO used was the self-adhesive kind and it hasn't lasted well. It also left sticky bits in all the wrong places as it failed, so it's difficult to replace. If it was my choice, I would use a good quality solvent-based contact cement.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 19 November 2016 at 08:46, ALAN BERGEN via CnC-List < cnc-list@cnc-list.com> wrote: > I'm replacing all of the ceiling access panels (1/8" plywood with cloth > covering) with FRP (fiberglass reinforced plastic). The existing ones are > screwed in. I want to use Velcro instead. What is the recommended > adhesive for this? Input from anyone who has first hand experience would be > appreciated. > > Alan Bergen > 35 Mk III Thirsty > Rose City YC > Portland, OR > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
