Alan. Isn't FRP "blasphemy" in a salon or so I thought that was the consensus when I did mine. I tried the Velcro route and didn't like the look. Too bulky at the edges. I used 4200 to secure the panels. So semi-permanent. I re-bedded everything prior. Had to brace the panels in place until the 4200 set. There are a few pictures Persuasion37.com under "the boat". I put the bubble side down and painted the head liner Interlux Perfection "blue glo" white. Really brightens the salon.
Mike PERSUASION www.persuasion37.com C&C 37 K/CB Long Sault > On Nov 19, 2016, at 11:46 AM, ALAN BERGEN via CnC-List > <cnc-list@cnc-list.com> wrote: > > I'm replacing all of the ceiling access panels (1/8" plywood with cloth > covering) with FRP (fiberglass reinforced plastic). The existing ones are > screwed in. I want to use Velcro instead. What is the recommended adhesive > for this? Input from anyone who has first hand experience would be > appreciated. > > Alan Bergen > 35 Mk III Thirsty > Rose City YC > Portland, OR > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
