eeze to come out.
>
>
> From: Tom Buscaglia
>> To: cnc-list@cnc-list.com
>> Cc:
>> Bcc:
>> Date: Sun, 2 Feb 2020 11:06:27 -0800
>> Subject: Stus-List Raw water blockage
>> I have checked the intake, pump, strainer, heat exchanger, mixing elbow.
>>
> From: Tom Buscaglia
>> To: cnc-list@cnc-list.com
>> Cc:
>> Bcc:
>> Date: Sun, 2 Feb 2020 11:06:27 -0800
>> Subject: Stus-List Raw water blockage
>> I have checked the intake, pump, strainer, heat exchanger, mixing elbow.
>> All are clear, elbow is n
: Sun, 2 Feb 2020 11:06:27 -0800
> Subject: Stus-List Raw water blockage
> I have checked the intake, pump, strainer, heat exchanger, mixing elbow.
> All are clear, elbow is new. Still, no water out exhaust.
>
> I am wondering if the vented loop between the heat exchanger and
Tom,
Upon launch one Spring, I started the engine and there was no water
coming out of the exhaust. After much searching , discovered the top of
the raw water strainer was not tightened sufficiently and air was
leaking in. I always empty the strainer bowl of water before winter lay
up and b
-list@cnc-list.com
Cc: Tom Buscaglia
Subject: Stus-List Raw water blockage
I have checked the intake, pump, strainer, heat exchanger, mixing elbow. All
are clear, elbow is new. Still, no water out exhaust.
I am wondering if the vented loop between the heat exchanger and mixing elbow
could
Here’s what I would do:
take the hose off the through hull and open the valve, making sure you get good
flow.
Check the gasket on the strainer and make sure it's tightened evenly to make
sure you’re not getting air from there.
Take the hose off the raw water pump and start the engine to make s
I have checked the intake, pump, strainer, heat exchanger, mixing elbow. All
are clear, elbow is new. Still, no water out exhaust.
I am wondering if the vented loop between the heat exchanger and mixing elbow
could be the culprit. It is even necessary on my boat? Seems that the elbow
is wel
