Yes the tiller is long "all passengers and dead weight please go to the
back "
On 15/09/2012 11:30 AM, wster1...@aol.com wrote:
Thanks Sam I will have to take a look. One other question seeing you
have the same boat does your boat have a very long tiller handle? My
wife says there is no room fo
You can find a C&C 26 on yachtsalvage.com..parts boat???
In a message dated 9/16/2012 6:52:37 P.M. Eastern Daylight Time,
d...@rogers.com writes:
What vintage is your 26 ?
Mine is a 1978 with waste tank and vent on Port side ,potable Water fill
is on the opposite side ,starboard
Waste t
What vintage is your 26 ?
Mine is a 1978 with waste tank and vent on Port side ,potable Water
fill is on the opposite side ,starboard
Waste tank is also located under the Vee berth on the port side
On 14/09/2012 8:43 PM, wster1...@aol.com wrote:
--
You will love your C&C 26. I had one for 6 years, a great boat.
John on Oxygen
London Ont
From: "wster1...@aol.com"
To: cnc-list@cnc-list.com
Sent: Saturday, September 15, 2012 11:30:07 AM
Subject: Re: Stus-List Fwd: C&C 26
Thanks Sam I
Bill,
Yes the tiller is long and when I steer I sit astride the traveller - on the
combing - and handle the traveller and the mainsheet, real close to the
companionway. The genoa trimmer (wife) works at the back of the cockpit -
astride the rudder stock - working the jib/genoa sheets at the rea
Thanks Sam I will have to take a look. One other question seeing you have
the same boat does your boat have a very long tiller handle? My wife says
there is no room for crew because it is so long. I told her I think it is for
single handed sailing as it put you close to the winches and travel
Bill,
My 1977 C&C 26 had a holding tank when I bought her about 10 years ago.
But it wasn't original, it had been retrofitted.
The tank is under the V berth. Plumbing goes from head to tank (via loop and
vacuum break) to discharge. No Y valve.
My manual says the original was self contained too.
Bill,
Congrats and welcome!
Sounds like the tank was retrofitted. Not unusual for a boat built in the
70s. I'd have the tank pumped, check the hoses and diverter valve and test
the head. It may be fine as is.
Joel
Sent from my iPad
On Sep 14, 2012, at 8:43 PM, "wster1...@aol.com" wrote:
From: wster1...@aol.com
To: cnc-list@cnc-list.com
Sent: 9/14/2012 8:09:30 P.M. Eastern Daylight Time
Subj: C&C 26
Hi- New to the list my wife and I are buying a very used C&C 26. I bought
a manual today to see how the boat was set up when it was bui
