s Bay, NS
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S
Sent: January 23, 2013 11:02 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
Dwight,
Here I am all safety minded and you spoil it with common sense.
Thanks. Now I can st
: cnc-list@cnc-list.com
Sent: Wednesday, January 23, 2013 6:47:26 PM
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
Hey Rich
How much effort you figure those tradesmen put into recertifying a 20 lb
tank.have a quick look, stamp on a new expiry date and give it a fresh pain
ent: Wednesday, January 23, 2013 6:47:26 PM
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
Hey Rich
How much effort you figure those tradesmen put into recertifying a 20 lb
tank…have a quick look, stamp on a new expiry date and give it a fresh paint
job or something more
filled at
home.
Chuck
Resolute
1990 C&C 34R
Atlantic City, NJ
- Original Message -
From: "Harry"
To: cnc-list@cnc-list.com
Sent: Wednesday, January 23, 2013 8:47:37 PM
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
Rick,
NFPA 58 LP Gas Code
tank. The upside is that it is an easy refit.
Harry
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick
Brass
Sent: Wednesday, January 23, 2013 11:41 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Do I really need OPV Valve on LPG tanks
h Knowles
Sent: January 23, 2013 7:04 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
Dunno about y'all down south, but up here in Kanada ALL propane work has to be
done by licensed tradesmen and installers. As Fred sez, do it right! Blam
Rich K
Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich
Knowles
Sent: January 23, 2013 7:04 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
Dunno about y&#
I had my 10lb aluminum tank re-valved and re-certified a couple years ago.
I seem to recall it was about 1/4 of the cost of a new aluminum tank.
I brought it to a local place "American Compressed Gas" that refills
propane tanks.
I am sure if they can't re-certify they will tell you.
Eric
C&C 34/
Dunno about y'all down south, but up here in Kanada ALL propane work has to be
done by licensed tradesmen and installers. As Fred sez, do it right! Blam
Rich Knowles
Indigo. LF38
Halifax
On 2013-01-23, at 18:41, Frederick G Street wrote:
Really, I wouldn't try this myself; any sort of acc
Really, I wouldn't try this myself; any sort of accident or explosion, and your
insurance company would refuse to pay, and rightly so. It doesn't cost that
much that I'd take the chance.
And I don't think the propane places that do this work would sell you just the
valve, in any case.
Fred St
faster. Our customer
service hot line at 1-800-446-1071 is open 7 days a week 7:00 am - 9:00 pm CST.
Terry Johnson
From: Frederick G Street
Sent: Wednesday, January 23, 2013 12:07 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
On Jan 23, 2013, at
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
On Jan 23, 2013, at 1:54 PM, Fred Hazzard wrote:
Assuming I get a OPV valve, how is that going to effect the operation of my
propane stove and water heater? The water heater is a demand system that
lights when water flows.
I
No. CNG is not a liquid and cannot be overfilled the same way.
Joe Della Barba
CNG STOVE USER ;)
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob Moriarty
Sent: Wednesday, January 23, 2013 3:16 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Do I really need OPV Valve
Does the OPV valve requirement also apply to CNG?
Bob M
Ox 33-1
Jax, FL
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
I got a fiberglass tank that fit in the existing locker. Fiberglass tanks have
to be recertified. I think the interval is every five years.
The OPV valve will not affect the operation of your stove or hot water heater.
Alan Bergen
C&C 35 Mk III Thirsty
Rose City YC
Portland, OR
__
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
On Jan 23, 2013, at 1:54 PM, Fred Hazzard
mailto:fredhazz...@spiritone.com>> wrote:
Assuming I get a OPV valve, how is that going to effect the operation of my
propane stove and water heater? The water heater is a demand
On Jan 23, 2013, at 1:54 PM, Fred Hazzard wrote:
> Assuming I get a OPV valve, how is that going to effect the operation of my
> propane stove and water heater? The water heater is a demand system that
> lights when water flows.
I switched over the valves on my system a few years back, and h
3
Seattle
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Fred Hazzard
Sent: Wednesday, January 23, 2013 11:54 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
Assuming I get a OPV valve, how is that going to effect the operat
; another question; how and where do I get a tank recertified?
Fred Hazzard
S/V Fury
C&C44
Portland, Or
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alan Bergen
Sent: Wednesday, January 23, 2013 11:19 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Do I really need
I had to replace a tank when I couldn't get it filled, because it didn't have
an OPV release valve. It was too old so I didn't have a valve installed.
Aluminum tanks are expensive, so it might be cost effective to have valves
installed.
Alan Bergen
C&C 35 Mk III Thirsty
Rose City YC
Portla
107
> 800-562-7797, 206-784-9903, Fax: 206-784-0506
>
> Martin
> Calypso
> 1970 C&C 43
> Seattle
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass
> Sent: Wednesday, January 23, 2013 8:41 AM
> To: cnc-list@cnc-list.com
> Subject: Stus-List Do I
, ON
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Martin DeYoung
Sent: Wednesday, January 23, 2013 1:20 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Do I really need OPV Valve on LPG tanks
Rick,
I use Sure Marine for Calypso's pr
0-562-7797, 206-784-9903, Fax: 206-784-0506
Martin
Calypso
1970 C&C 43
Seattle
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass
Sent: Wednesday, January 23, 2013 8:41 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Do I really need
need OPV Valve on LPG tanks
I'm in the early stages of converting Imzadi from an old Galley Maid alcohol
stove to a propane stove. I got a great deal on a Flavel stove from a friend
who decided to install a 3 burner model in his trawler after already purchasing
the two burner stove I b
I'm in the early stages of converting Imzadi from an old Galley Maid alcohol
stove to a propane stove. I got a great deal on a Flavel stove from a friend
who decided to install a 3 burner model in his trawler after already
purchasing the two burner stove I bought from him. That made propane a "when
25 matches
Mail list logo
