st
Subject: Re: Stus-List Deck hardware for mooring
A lot of harbour masters on the East Coast would disagree with you. I am in
12-15' of water with 30' of 1" bottom chain and 15' of 5/8" top chain and 18'
of pendants. It takes a lot to lift the bottom chain.
: Saturday, March 14, 2015 10:59 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Deck hardware for mooring
I wouldnt be so sure about the catenary providing much shock absorption. In
about 30 knots of wind my mooring chain is pretty much stretched out taught.
I have 30 feet of chain in 12 feet of
ey seem to recommend pretty big lines.
From: rickbr...@earthlink.net
To: pjbake...@hotmail.com; cnc-list@cnc-list.com
Subject: RE: Stus-List Deck hardware for mooring
Date: Sat, 14 Mar 2015 21:59:02 -0400
Like some of the others, I suspected your plan to use at least ¾” pendants to
be overkill for a 27
torm.
Jack Brennan
Former C&C 25
Shanachie, 1974 Bristol 30
Sent from my Samsung Galaxy Tab®|PRO
Original message
From: Joe Della Barba via CnC-List
Date:03/14/2015 10:58 PM (GMT-05:00)
To: cnc-list@cnc-list.com
Subject: Re: Stus-List De
Brass via CnC-List
> *Sent:* Saturday, March 14, 2015 9:59 PM
> *To:* 'Paul Baker'; cnc-list@cnc-list.com
> *Subject:* Re: Stus-List Deck hardware for mooring
>
>
>
> Like some of the others, I suspected your plan to use at least ¾” pendants
> to be overkill for a 27 f
Dang, act of God clause...
Brent Driedger
27-5
Lake Winnipeg
Sent from my iPhone
> On Mar 14, 2015, at 5:08 PM, robert via CnC-List
> wrote:
>
> And remember, no matter where our boats are in a hurricane, they are always
> in God's handsthat's why we have insurance.
>
> Rob Abbott
> AZU
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick
Brass via CnC-List
Sent: Saturday, March 14, 2015 9:59 PM
To: 'Paul Baker'; cnc-list@cnc-list.com
Subject: Re: Stus-List Deck hardware for mooring
Like some of the others, I suspected your plan to use at least ¾
Like some of the others, I suspected your plan to use at least ¾ pendants
to be overkill for a 27 foot boat.
Someone else pointed out that you want some stretch to cushion the shock and
¾ line will have no stretch to speak of at the loads your boat will
generate. But the desirability of stre
You can almost see my house from one of the gallery pics! Certainly can see my
neighbour.
Peter Fell
Sidney, BC
Cygnet
C&C 27 MkIII
From: Jim Watts via CnC-List
Sent: Saturday, March 14, 2015 10:10 AM
To: jackbrennan ; 1 CnC List
Subject: Re: Stus-List Deck hardware for mooring
Paul,
t at least, likely way more in our harbour.
Thanks for everyone's thoughts on this.
Cheers,
Paul.
Date: Sat, 14 Mar 2015 19:08:46 -0300
From: robertabb...@eastlink.ca
To: pjbake...@hotmail.com; cnc-list@cnc-list.com
Subject: Re: Stus-List Deck hardware for mooring
Paul:
Jim wrote:
Be very careful with snubbers.
Right. I use a single snubber, tied on with a modified rolling hitch.
It has held fine in 50 with gusts to 70, but after that it was about
four feet longer. Now it's a dock line, and I have a new snubber.
(Actually, I'm a few snubbers past that.)
inal Message -
From: "Jim Watts via CnC-List"
To: "Eric Cahn" , "1 CnC List"
Sent: Saturday, March 14, 2015 6:52:14 PM
Subject: Re: Stus-List Deck hardware for mooring
Be very careful with snubbers. When I worked at West we had to replace several
sets of moori
Nyack Boat Club is on the Hudson River and the anchorage is unprotected. In
a north east blow this is seven miles of fetch. From the east there is
about 2 miles.
In the fall during a Nor'easter we would usually lose a boat or two. We
seemed to accept this as "normal".
However after hurricane Sand
Be very careful with snubbers. When I worked at West we had to replace
several sets of mooring lines that had been eaten by WM snubbers. Those
were not a good design at all.
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 14 March 2015 at 15:42, Eric Cahn via CnC-List
wrote:
> {{{>You wa
{{{>You want to size mooring lines so there is some give, just like an
anchor
> line. Bigger is not necessarily better.
>
> In a large storm, stagger maybe 5 lines of different length so that one
> takes over as another breaks. They will break in big storms.
>
> I never saw a mooring cleat pull out
-
Date: Sat, 14 Mar 2015 10:10:15 -0700
To: jackbren...@bellsouth.net; cnc-list@cnc-list.com
Subject: Re: Stus-List Deck hardware for mooring
From: cnc-list@cnc-list.com
Paul, you will be happy to know you can keep track of your boat when
it's out
makes good chafe guard in a fix.
Jack BrennanFormer C&C 25Shanachie, 1974 Bristol 30Tierra Verde, Fl.
Sent from my Samsung Galaxy Tab®|PRO
Original message
From: Graham Collins via CnC-List
Date:03/14/2015 11:06 AM (GMT-05:00)
To: Paul Baker ,cnc-list@cnc-list.com
>
> Duct tape makes good chafe guard in a fix.
>
> Jack Brennan
> Former C&C 25
> Shanachie, 1974 Bristol 30
> Tierra Verde, Fl.
>
>
>
>
> Sent from my Samsung Galaxy Tab®|PRO
>
>
> Original message
> From: Graham Collins via C
ra Verde, Fl.
Sent from my Samsung Galaxy Tab®|PRO
Original message
From: Graham Collins via CnC-List
Date:03/14/2015 11:06 AM (GMT-05:00)
To: Paul Baker ,cnc-list@cnc-list.com
Subject: Re: Stus-List Deck hardware for mooring
null___
buoy
mast/hook looks a fine idea indeed.
Cheers,
Paul.
Date: Fri, 13 Mar 2015 23:27:45 -0300
From: cnclistforw...@hotmail.com
To: pjbake...@hotmail.com; cnc-list@cnc-list.com
Subject: Re: Stus-List Deck hardware for mooring
st-boun...@cnc-list.com] On Behalf Of Rick
Brass via CnC-List
Sent: Friday, March 13, 2015 9:46 PM
To: 'Paul Baker'; cnc-list@cnc-list.com
Subject: Re: Stus-List Deck hardware for mooring
If your 27 is like my 1975 25, the foredeck is cored with ¾ marine plywood.
I have a central cleat w
oy mast/hook looks a fine idea indeed.
Cheers,
Paul.
Date: Fri, 13 Mar 2015 23:27:45 -0300
From: cnclistforw...@hotmail.com
To: pjbake...@hotmail.com; cnc-list@cnc-list.com
Subject: Re: Stus-List Deck hardware for mooring
Hi Paul
My boat lives on a mooring, the setup is a
Hi Paul
My boat lives on a mooring, the setup is a chock on each side and a
cleat aft of each. I would not use the anchor roller for mooring lines.
3/4" pendants are overkill, I'm running 3/4 and am probably 12000 lbs.
I had an Aloha 27, I used 5/8 pendants for it, similar size to the C&C 27
you indicate you do not have them now.
Rick Brass
Washington, NC
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul
Baker via CnC-List
Sent: Friday, March 13, 2015 8:28 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Deck hardware for mooring
So, I am going t
So, I am going to be moving my boat from a nice, safe and secluded slip, to a
mooring buoy out in the harbour. Yes, the mooring is big enough, yes I will be
using at least 2 unequal pendants of good quality (probably at least 3/4"), and
yes I will be using chafe guard where appropriate. Assume
25 matches
Mail list logo
