.
via CnC-List
Sent: Tuesday, September 22, 2015 9:19 PM
To: cnc-list@cnc-list.com
Cc: Dennis C.
Subject: Re: Stus-List C&C trademark stripe.
Get a 3M Stripe Off wheel and remove the old tape. It's basically a round
rubber eraser on a mandrel. 10 minutes a side.
3M part 07498
Dennis
away.
Chuck
Resolute
1990 C&C 34R
Broad Creek, Magothy River, Md
- Original Message -
From: "Chuck S via CnC-List"
To: "CNC boat owners, cnc-list"
Cc: "Chuck S"
Sent: Tuesday, September 22, 2015 8:46:23 PM
Subject: Re: Stus-List C&C trademark
Message -
From: "David via CnC-List"
To: "CNC CNC"
Cc: "David"
Sent: Tuesday, September 22, 2015 11:21:30 AM
Subject: Re: Stus-List C&C trademark stripe.
Got it. My stripe resides in a molded recess to make re-applying easier, but
will the wheel work i
; cleaning thoroughly?
>
> David F. Risch
> (401) 419-4650 (cell)
>
>
> --
> To: cnc-list@cnc-list.com
> Date: Tue, 22 Sep 2015 10:59:05 -0400
> Subject: Re: Stus-List C&C trademark stripe.
> From: cnc-list@cnc-list.com
> CC: billbin
Ahoy,
For the trademark strip I used 1/2' tape in seagreen. At the ever friendly and
helpful and affordable http://www.hollandmarine.com in Canada you will be able
to purchase the stars and pointed tips as well, and in different colors - but
if I remember right their decal supplies are limited.
time.
David DonnellyC&C 26 Mistress
Sent from my Samsung device
Original message
From: Bill Bina - gmail via CnC-List
Date: 09-22-2015 9:11 AM (GMT-07:00)
To: cnc-list@cnc-list.com
Cc: Bill Bina - gmail
Subject: Re: Stus-List C&C trademark stripe.
I wo
t; most of the time.
>
> David Donnelly
> C&C 26 Mistress
>
>
>
> Sent from my Samsung device
>
>
> Original message
> From: Bill Bina - gmail via CnC-List
> Date: 09-22-2015 9:11 AM (GMT-07:00)
> To: cnc-list@cnc-list.com
> C
Thanks all. Tape it is! I will try Holland Marine at Ken's suggestion. I am an
hour north of his store and Peter will even mail it. I should have looked there
to start with, he has a surprising C&C OEM inventory. A couple of years ago I
was able to source an original holding tank and that's not
Hey that's practically one stop shopping , thanks
Tim
C&C 33mkii
Matico
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
Jean-Francois J Rivard via CnC-List
Sent: Tuesday, September 22, 2015 1:29 PM
To: cnc-list@cnc-list.com
Cc: Jean-Francois J Rivard
Subject: Stus
Hi Len,
I re-did mine a couple years and used a multi-step approach that provided
an "As New" look.
I got the trademark enblems / stars for both ends from Holland Marine in
Toronto. Those are actual originals. (http://www.hollandmarine.com/) they
also have the ready made triple stripe in s
Ahoy,
For the trademark strip I use 1/2' tape. At the ever friendly and helpful and affordable www.hollandmarine.com in Canada you will be able to purchase the stars and points as well - I think their supplies are limited.
cheers
Janko
--
Point of View New York City: A Game of The City You
side.
We finished the tips with an X-acto knife.
Michael Brown
Windburn
C&C 30-1
Date: Tue, 22 Sep 2015 10:21:14 -0400
From: Mitchell's
To: CNC List
Subject: Stus-List C&C trademark stripe.
Message-ID: <8bf31be7-ce00-4762-b1a1-1fc1e641b...@yahoo.ca>
Content-Type: text/plain;
Check out the C&C Stars and stripes on this page (scroll down a bit):
http://www.hollandmarine.com/CCfolder/CC001.html
>From this: http://www.hollandmarine.com/
Ken H.
On 22 September 2015 at 11:21, Mitchell's via CnC-List <
cnc-list@cnc-list.com> wrote:
> The paint in my recessed stripes and s
cnc-list@cnc-list.com
Cc: Bill Bina - gmail
Subject: Re: Stus-List C&C trademark stripe.
I would highly recommend removing
the old tape. Just make sure to measure and mark when it goes
with a grease pencil before removing the original. I measured
the dis
Got it. My stripe resides in a molded recess to make re-applying easier, but
will the wheel work in that recess?
David F. Risch
(401) 419-4650 (cell)
To: cnc-list@cnc-list.com
Date: Tue, 22 Sep 2015 11:11:27 -0400
Subject: Re: Stus-List C&C trademark stripe.
From: cnc-list@cnc-list.co
We are re-doing ours as well. Can you apply tape over old tape after cleaning
thoroughly?
David F. Risch
(401) 419-4650 (cell)
To: cnc-list@cnc-list.com
Date: Tue, 22 Sep 2015 10:59:05 -0400
Subject: Re: Stus-List C&C trademark stripe.
From: cnc-list@cnc-list.com
CC: billbinal...@gmail
cleaning thoroughly?
David F. Risch
(401) 419-4650 (cell)
To: cnc-list@cnc-list.com
Date: Tue, 22 Sep 2015 10:59:05 -0400
Subject: Re: Stus-List C&C trademark stripe.
From: cnc-list@cnc-list.com
CC: billbinal...@gmail.com
Len:
The 'cove strip' on our boat is a blue tape.was there when we bought
the boat 10 years ago..not sure when it was actually
applied.looks as good now as it did in 2006. Not certain but I
think the PO got it from an automotive store.
Point being, tape will work just fine if it
Any place that sells autobody supplies can get you scotchlite tape in
any color and width you like. It lasts about 20-30 years.
http://solutions.3m.com/wps/portal/3M/en_US/ScotchliteNA/Scotchlite/
Bill Bina
On 9/22/2015 10:21 AM, Mitchell's via CnC-List wrote:
The paint in my recessed stripes
West Marine. Jerry. J&J.
Sent from my iPhone
> On Sep 22, 2015, at 10:21 AM, Mitchell's via CnC-List
> wrote:
>
> The paint in my recessed stripes and stars is fading and peeling. Anyone have
> success with tape? How long tape will it last in the sun? Where did you get
> the tape?
> Len
The paint in my recessed stripes and stars is fading and peeling. Anyone have
success with tape? How long tape will it last in the sun? Where did you get the
tape?
Len Mitchell
Crazy Legs
1989 37+
Sent from my mobile device.
___
Email address:
CnC-Li
21 matches
Mail list logo
