From: CnC-List On Behalf Of Matt Wolford via
CnC-List
Sent: Tuesday, July 14, 2020 3:01 PM
To: cnc-list@cnc-list.com
Cc: wolf...@erie.net
Subject: Re: Stus-List Barient 27 winch servicing - still squeaks!
My 27s are original Barient.
My boat is a 1976 42 Custom (only six made, mine
As I recall I was able to successfully eliminate the squeal by removing the
spacer plate in my 22ST. I'll investigate again.
Josh
On Tue, Jul 14, 2020, 15:45 Andrew Means via CnC-List
wrote:
> Josh I thought that was the issue as well (and the screws have definitely
> rubbed at some point in t
Josh I thought that was the issue as well (and the screws have definitely
rubbed at some point in the past) but after adjusting the screws to make
sure they weren't rubbing I still hear the squeak.
On Tue, Jul 14, 2020 at 12:25 PM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> I miss
> Yes and yes. I eventually got it off, but I can’t recall now how I did it
> (it was a while ago). Try using some penetrating oil and let it sit before
> hitting it again. I’ll take a look at mine and see if I can recall
> anything else I may have done.
>
>
>
> *From:*
gt; > CnC-List
> > Sent: Tuesday, July 14, 2020 2:05 PM
> > To: cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com
> > Cc: Andrew Means > mailto:andrew.cnc...@gmail.com >
> > Subject: Re: Stus-List Barient 27 winch servicing - still squeaks!
> &
The screws that hold the spring tension on the line lifter are too tight
and are rubbing on the bronze spindle below. A series of small washers or
grinding of the screws short will most likely fix the problem.
All the best,
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Tue, Jul 14, 20
I misspoke... The line lifter was the wrong term. I meant the pressure
plate.
On Tue, Jul 14, 2020, 15:17 Josh Muckley wrote:
> The screws that hold the spring tension on the line lifter are too tight
> and are rubbing on the bronze spindle below. A series of small washers or
> grinding of the
Means via CnC-List
*Sent:* Tuesday, July 14, 2020 2:05 PM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* Andrew Means mailto:andrew.cnc...@gmail.com>>
*Subject:* Re: Stus-List Barient 27 winch servicing - still squeaks!
Thanks Matt! I'll try
2:49 PM
To: cnc-list@cnc-list.com
Cc: Andrew Means
Subject: Re: Stus-List Barient 27 winch servicing - still squeaks!
I think the Barient 27s are measured somehow differently than Lewmar; they're
roughly equivalent to a Lewmar 40, size-wise. What size boat do you have?
Anybody have a
spin pole topping lift.
>
>
>
> *From:* CnC-List *On Behalf Of *Andrew
> Means via CnC-List
> *Sent:* Tuesday, July 14, 2020 2:05 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Andrew Means
> *Subject:* Re: Stus-List Barient 27 winch servicing - still squeaks!
>
>
>
> Th
On Behalf Of Andrew Means via
CnC-List
Sent: Tuesday, July 14, 2020 2:05 PM
To: cnc-list@cnc-list.com
Cc: Andrew Means
Subject: Re: Stus-List Barient 27 winch servicing - still squeaks!
Thanks Matt! I'll try some penetrating oil and see where it gets me. When you
got the lifter arm off
gt; anything else I may have done.
>
>
>
> *From:* CnC-List *On Behalf Of *Andrew
> Means via CnC-List
> *Sent:* Tuesday, July 14, 2020 1:07 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Andrew Means
> *Subject:* Stus-List Barient 27 winch servicing - still squeaks!
>
>
&
via
CnC-List
Sent: Tuesday, July 14, 2020 1:07 PM
To: cnc-list@cnc-list.com
Cc: Andrew Means
Subject: Stus-List Barient 27 winch servicing - still squeaks!
Hi all -
The two Barient 27 primary winches on the Safari were in sorry shape, so last
week I decided to service them. After a
Hi all -
The two Barient 27 primary winches on the Safari were in sorry shape, so
last week I decided to service them. After a rather protracted battle I was
able to disassemble and clean/oil/grease one of them to my satisfaction,
however - when reassembling the first winch I realized that, while
14 matches
Mail list logo
