My 27s are original Barient.
My boat is a 1976 42 Custom (only six made, mine being the last one). I raced against it when I was kid. The original Baltic 42 was a sistership. Impressive looking boat. From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Andrew Means via CnC-List Sent: Tuesday, July 14, 2020 2:49 PM To: cnc-list@cnc-list.com Cc: Andrew Means <andrew.cnc...@gmail.com> Subject: Re: Stus-List Barient 27 winch servicing - still squeaks! I think the Barient 27s are measured somehow differently than Lewmar; they're roughly equivalent to a Lewmar 40, size-wise. What size boat do you have? Anybody have a good size comparison tool across winch brands? On Tue, Jul 14, 2020 at 11:16 AM Matt Wolford via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Sadly, it has been too long for me to remember what we did. I serviced all the winches on my boat several years ago – okay, everybody, you can chastise me now. I chuckled when I read that your boat uses size 27 for your primaries. I use mine for my spin pole topping lift. From: CnC-List <cnc-list-boun...@cnc-list.com <mailto:cnc-list-boun...@cnc-list.com> > On Behalf Of Andrew Means via CnC-List Sent: Tuesday, July 14, 2020 2:05 PM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Andrew Means <andrew.cnc...@gmail.com <mailto:andrew.cnc...@gmail.com> > Subject: Re: Stus-List Barient 27 winch servicing - still squeaks! Thanks Matt! I'll try some penetrating oil and see where it gets me. When you got the lifter arm off were you able to adjust the height so it no longer rubbed against the clamp ring? Or were you able to lubricate it a bit so it didn't squeak? Andrew On Tue, Jul 14, 2020 at 10:30 AM Matt Wolford via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Yes and yes. I eventually got it off, but I can’t recall now how I did it (it was a while ago). Try using some penetrating oil and let it sit before hitting it again. I’ll take a look at mine and see if I can recall anything else I may have done. From: CnC-List <cnc-list-boun...@cnc-list.com <mailto:cnc-list-boun...@cnc-list.com> > On Behalf Of Andrew Means via CnC-List Sent: Tuesday, July 14, 2020 1:07 PM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Andrew Means <andrew.cnc...@gmail.com <mailto:andrew.cnc...@gmail.com> > Subject: Stus-List Barient 27 winch servicing - still squeaks! Hi all - The two Barient 27 primary winches on the Safari were in sorry shape, so last week I decided to service them. After a rather protracted battle I was able to disassemble and clean/oil/grease one of them to my satisfaction, however - when reassembling the first winch I realized that, while definitely smoother internal operations, it still squeaks! I think I've traced it to the line lifter rubbing on the clamp ring (see manual here <http://svsoggypaws.com/files/Winches/Barient%2027%20ST%20Winch%20Service%20Manual.pdf> ). I didn't think I needed to remove the line lifter originally, but after tracing the squeak there I wasn't able to unscrew it (the manual says to tap it with a soft hammer - hitting it rather hard with a soft hammer didn't help either). Does anyone else have these winches on their boat? Anybody else had this problem? Andrew _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
