Hi Derek,
I purchased a 29-2 in 2012 - 1985 hull 693.
In have looked at a lot of 29-2's over the last few years.
Most do not have any signs of cracks in the hulls either below the waterline
or above.
I have seen a couple with cracks radiating out from the forward edge and
trailing edge of th
Of Bob Hickson
Sent: Monday, June 24, 2013 6:09 PM
To: cnc-list@cnc-list.com
Subject: Stus-List 29-2 keel bolts
I have a 29-2 that I bought a year ago.
Up until 3 weeks ago there were no leaks into the bilge around the keel bolts /
mast step.
The channel between the bay where I keep t
at the C&C factories intended.
>
> Kirk Sneddon
> C&C 29 Mk II – Flying Cloud
>
>
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob Hickson
> Sent: Monday, June 24, 2013 6:09 PM
> To: cnc-list@cnc-list.com
> Subject: Stus-List 29-2 keel
29 Mk II Flying Cloud
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
Hickson
Sent: Monday, June 24, 2013 6:09 PM
To: cnc-list@cnc-list.com
Subject: Stus-List 29-2 keel bolts
I have a 29-2 that I bought a year ago.
Up until 3 weeks ago there were no leaks into t
I would resist the urge to fill those holes with anything. Access to
oxygen is what keeps those stainless steel bolts from corroding. Add
sealant, and you could cause a much greater problem than the one you
have now. If you have water coming in from the keel joint, that is where
you need to add
Bob,
If I were you, I'd get the boat hauled and looked at by a professional.
My father hit a rock once in the Enterprise-A that started as a slow leak and
worsened very quickly.
The keel had to be dropped and everything rebedded. $8,000 in repairs, but
covered by insurance.
All the best,
n VA
cid:image001.png@01CE3D06.5A990940
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
Hickson
Sent: Monday, June 24, 2013 6:09 PM
To: cnc-list@cnc-list.com
Subject: Stus-List 29-2 keel bolts
I have a 29-2 that I bought a year ago.
Up until 3 weeks ago there wer
I have a 29-2 that I bought a year ago.
Up until 3 weeks ago there were no leaks into the bilge around the keel
bolts / mast step.
The channel between the bay where I keep the boat and Lake Ontario is
currently under re-construction and dredging.
Three weeks ago, I hit a pile of mud / sand tha
