for
> eventual needs. Made sense to me.
> --
> From: Jean-Francois J Rivard via CnC-List
> Sent: 2015-03-31 1:08 PM
> To: cnc-list@cnc-list.com
> Cc: lumg...@hotmail.com
> Subject: Stus-List running wire for chart plotter etc
>
> Hi Brad,
>
day, March 30, 2015 5:26:11 PM
Subject: Stus-List running wire for chart plotter etc
How much stuff is inside the Edson pedestal on a C&C 33 II? Shift cable,
throttle cable and steering shaft? I've seen a few references to drilling into
the guard and running the wiring inside it,
been almost impossible to manage all the extra cables inside the
> pedestal.
>
> Regards,
> Ron
> Ronald V. Ricci
> S/V Patriot
> C&C 37+
> Bristol, RI
> ron.ri...@1968.usna.com
>
>
>
> -Original Message-
> From: Bradley Lumgair [mailto:lumg...@ho
From: Bradley Lumgair [mailto:lumg...@hotmail.com]
Sent: Monday, March 30, 2015 5:26 PM
To: cnc-list@cnc-list.com
Subject: Stus-List running wire for chart plotter etc
How much stuff is inside the Edson pedestal on a C&C 33 II? Shift cable,
throttle cable and steering shaft? I've seen a
installed the Zeus and
there was plenty of space in the pedestal / holes at the bottom. Like you
I already had power and other wheelpilot related wiring
From: "Bradley Lumgair via CnC-List"
To: cnc-list@cnc-list.com
Sent: Monday, March 30, 2015 5:26:11 PM
Subject: Stus-List ru
: cnc-list@cnc-list.com
Sent: Monday, March 30, 2015 5:26:11 PM
Subject: Stus-List running wire for chart plotter etc
How much stuff is inside the Edson pedestal on a C&C 33 II? Shift cable,
throttle cable and steering shaft? I've seen a few references to drilling into
the guard and runni
Hi Brad
There is room inside the pedestal, I've got the power and Seatalk NG
wires for a Ray chartplotter running through mine. The reason I went
that route was that there had previously been the wiring for the wheel
drive (autopilot) running through there, so there is already a hole in
the p
wire for chart plotter etc
How much stuff is inside the Edson pedestal on a C&C 33 II? Shift cable,
throttle cable and steering shaft? I've seen a few references to drilling
into the guard and running the wiring inside it, but wondered if there was
more empty space in the pedestal itse
Bradley, I have removed my edson pedestal on my 33 mkII for a paint job, so I
can easily answer that question. There is a shifter cable and a throttle cable
which are fastened to the rear of the pedestal. (there should be an acorn nut
visible on the back side of the pedestal) The steering cables
How much stuff is inside the Edson pedestal on a C&C 33 II? Shift cable,
throttle cable and steering shaft? I've seen a few references to drilling into
the guard and running the wiring inside it, but wondered if there was more
empty space in the pedestal itself? There should already be a substan
10 matches
Mail list logo
