I owned hull #44 for 12 years and sailed it extensively, never raced. I
now own a 30 MKII
I sailed in Fisher's Island Sound/LIS/BIS. Wind can be blowing stink on
one end of Fisher's and becalmed on the other. Some call LIS "The Dead
Sea" in August but it can be rocking at the mouths of the rive
ing?) the rudder is pretty far out of
the water, and loses effectiveness.
Gary
- Original Message -
From: Ron and Sharon via CnC-List
To: Michael Brown via CnC-List
Sent: Thursday, June 12, 2014 3:31 PM
Subject: Stus-List C&C 30 mk1 rudder design
Thankyou to all the me
> *Joe Della Barba*
>
> Coquina
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Ron
> and Sharon via CnC-List
> *Sent:* Thursday, June 12, 2014 3:31 PM
> *To:* Michael Brown via CnC-List
> *Subject:* Stus-List C&C 30 mk1 rudder design
>
>
>
The A4 is a good engine e for that boat.
Joe Della Barba
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron and
Sharon via CnC-List
Sent: Thursday, June 12, 2014 3:31 PM
To: Michael Brown via CnC-List
Subject: Stus-List C&C 30 mk1 rudder design
Thankyou to all
Thankyou to all the members who replied to my questions.
The cnc-list archives has an amazing amount of information.
I liked Antoine's reply the best and will be following his advice soon.
I am confused about the photo of the rudder on Curtis's 1980 mk1.
I visited a brokers storage lot this week wh
day, June 12, 2014 12:06 PM
To: Simon Warren; cnc-list@cnc-list.com
Subject: Re: Stus-List C&C 30 mk1 rudder design
Nope, I dont like the folding prop. I have no rev to speek of. Its dangrous..
Im going to change it as soon as I can find the money. I try to always go
froward.
Great boa
which is OK, but not much power
> in reverse.
>
> BTW I have C&C30MK1 #657, pretty close to your 675.
>
> Simon
>
> From: "Curtis via CnC-List"
> To: "Michael Brown" ,
> Subject: Stus-List C&C 30 mk1 rudder design
> Date: Wed, Jun 11,
ently have a 2 blade composite prop, which is OK, but not much power
in reverse.
BTW I have C&C30MK1 #657, pretty close to your 675.
Simon
From: "Curtis via CnC-List"
To: "Michael Brown" ,
Subject: Stus-List C&C 30 mk1 rudder design
Date: Wed, Jun 11, 2014 9:43 PM
I have a 1977 Mk 1, #467, same swept back rudder.
Sent from my Verizon Wireless 4G LTE Smartphone
- Reply message -
From: "Curtis via CnC-List"
To: "Michael Brown" ,
Subject: Stus-List C&C 30 mk1 rudder design
Date: Wed, Jun 11, 2014 9:43 PM
Here is the bottom
oes the high aspect ratio rudder look like? Does anyone have a
> picture of
> one? The redesign was mentioned in a few articles including from the cnc
> archive.
>
> Michael Brown
> Windburn
> C&C 30-1
>
>
> Date: Wed, 11 Jun 2014 10:00:17 -0700
> From: &quo
dder look like? Does anyone have a picture of
one? The redesign was mentioned in a few articles including from the cnc
archive.
Michael Brown
Windburn
C&C 30-1
Date: Wed, 11 Jun 2014 10:00:17 -0700
From: "Ron and Sharon"
To:
Subject: Stus-List C&C 30 mk1 rud
oat
for racing or cruising with 4 – 5 crew.
Don Wagner
C&C 41 CB
Der Baron
From: Della Barba, Joe via CnC-List
Sent: Wednesday, June 11, 2014 3:10 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List C&C 30 mk1 rudder design
My boat is a big version of the old C&C 30. I have noticed
From: Della Barba, Joe via CnC-List
Sent: Wednesday, June 11, 2014 3:10 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List C&C 30 mk1 rudder design
My boat is a big version of the old C&C 30. I have noticed no issues in reverse
with my rudder. I rarely use my tiller, so I can’t rea
Hi Ron,
I have a C&C 30 1973 (hull built in 1972) with that exact rudder.
Yes, there are some weather helm, especially on a reach with a tiller.
When I purchased the boat in 2000, I noted that an earlier owner bolted a piece
of wood in front of the rudder to increase the compensation by adding sur
helm is a wrestling match you need
some sail trim or sail reduction.
Joe Della Barba
Coquina C&C 35 MK I
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron and
Sharon via CnC-List
Sent: Wednesday, June 11, 2014 1:00 PM
To: cnc-list@cnc-list.com
Subject: Stus-List C&C 30
nesday, June 11, 2014 1:00 PM
Subject: Stus-List C&C 30 mk1 rudder design
Good morning,
This is my first entry on the cnc-list. I have 40 yrs. of sailing experiece;
mostly on Petersons.
I am presently without a boat and have been looking at older C&C 30 mk1's
(1973-75).
There are
Good morning,
This is my first entry on the cnc-list. I have 40 yrs. of sailing experiece;
mostly on Petersons.
I am presently without a boat and have been looking at older C&C 30 mk1's
(1973-75).
There are several for sale in my area; asking price about $16,000.
They seem to be well built and in
17 matches
Mail list logo
