Hello again,
I just wanted to offer an update with regard to cleaning off the old caulk,
So, I carefully scraped as much caulk as I could off with a razor
blade. 2 of the hatches are located right in the non skid! (that
sucked!) This ate up 2 boat days!
Then, I got the McKanica Silicon caul
Another vote for butyl tape. It depends on kind of caulk you are trying to
remove. McKanica works pretty well on Silicone. If it's a urethane caulk,
mechanical methods and Debond may work. Butyl tape will probably respond
to mineral spirits, but is easy to remove mechanically, anyway.
Good luc
ing it and cleaning up the excess.
YMMV,
Charlie Nelson
Water Phantom
C&C 36 XL/kcb
cenel...@aol.com
-Original Message-
From: Mark McMenamy via CnC-List
To: cnc-list
Cc: Mark McMenamy
Sent: Sun, Jan 15, 2017 8:35 pm
Subject: Re: Stus-List Removing
xcess.
YMMV,
Charlie Nelson
Water Phantom
C&C 36 XL/kcb
cenel...@aol.com
-Original Message-
From: Mark McMenamy via CnC-List
To: cnc-list
Cc: Mark McMenamy
Sent: Sun, Jan 15, 2017 8:35 pm
Subject: Re: Stus-List Removing caulk residue
McKanica makes a silicone remover
;>
Date: 1/15/17 7:02 PM (GMT-05:00)
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: G Collins mailto:cnclistforw...@hotmail.com>>
Subject: Re: Stus-List Removing caulk residue
get a 1" chisel, very carefully use it to scrape the surface clean. It might
be best to r
cnc-list@cnc-list.com Cc: G Collins Subject: Re:
Stus-List Removing caulk residue
get a 1" chisel, very carefully use it to scrape the surface clean. It might
be best to round off the corners of the chisel if you are not sure of your
hand...
Graham Collins
Secret Plans
C&C 35-III
get a 1" chisel, very carefully use it to scrape the surface clean. It might
be best to round off the corners of the chisel if you are not sure of your
hand...
Graham Collins
Secret Plans
C&C 35-III #11
On 2017-01-15 7:48 PM, Danny Haughey via CnC-List wrote:
Hello all,
I'm in the process of r
