McKanica makes a silicone remover that has worked very well for me. It's a gel that you put on the silicone. After an hour or so it breaks down and comes right off. It's on Amazon.
Mark On Jan 15, 2017, at 8:23 PM, Danny Haughey via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I've been carefully scraping with a single edge razor blade. It still leaves a residue... I'm thinking the caulk is probably silicone. Danny Sent from my T-Mobile 4G LTE Device -------- Original message -------- From: G Collins via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Date: 1/15/17 7:02 PM (GMT-05:00) To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: G Collins <cnclistforw...@hotmail.com<mailto:cnclistforw...@hotmail.com>> Subject: Re: Stus-List Removing caulk residue get a 1" chisel, very carefully use it to scrape the surface clean. It might be best to round off the corners of the chisel if you are not sure of your hand... Graham Collins Secret Plans C&C 35-III #11 On 2017-01-15 7:48 PM, Danny Haughey via CnC-List wrote: Hello all, I'm in the process of replacing all my hatches. I've removed them and trying to clean the surface where they bed. I have the de-bond marine product. I applied that and scraped again but, there is still residue. Anyone have a secret method to get that surface clean? I'm going to try something abrasive like scotch Brite pads. Danny Sent from my T-Mobile 4G LTE Device _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
