Hi Mike,
I'm trying to catch up with the list, so sorry for the late reply!
I was in a similar situation to yours 4 years ago (wedges falling down below)
and also went for Spartite. I really like the solution and wouldn't go back to
wood wedges. After four years, the spartite is still sou
It varies on each point around the mast and from boat to boat. Heck, on
my boat the hole through the deck is about 3/8" off center. The first
time, I made rough chocks and then spent a day on the dock with a belt
sander forming the chocks to fit. The second time, I did a generic
spar-tite th
Thanks Rich, yes I was looking for the dimensions for the wedges at the
partners. The mast was pulled for electrical work over the winter and PO used
scrap 2x4 that wasn't doing a great job (would fall on your head in a good
breeze). I've got some scrap white oak that I want to mill them fro
Hey Dwight,
I'm thinking he wanted to bump some more lurkers off the list? :)
At 01:52 PM 02/06/2014, you wrote:
THAT'S 6 OR 7 TIMES FOR THE SAME EMAIL, I HOPE YOU GET SOME ANSWERS
--
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
wiscomik...@yahoo.com via CnC-L
Dwight,
Are we getting a wee bit cranky?
Mike
-Original Message-
From: CnC-List on behalf of dwight via CnC-List
Sent: Mon 02/06/2014 5:52 PM
To: wiscomik...@yahoo.com; cnc-list@cnc-list.com
Subject: Re: Stus-List LF 38 Mast Wedge Dimensions
THAT'S 6 OR 7 TIMES FOR THE SAME
THAT'S 6 OR 7 TIMES FOR THE SAME EMAIL, I HOPE YOU GET SOME ANSWERS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
wiscomik...@yahoo.com via CnC-List
Sent: June 2, 2014 3:44 PM
To: cnc-list@cnc-list.com
Subject: Stus-List LF 38 Mast Wedge Dimensions
Hi all, I
CnC-List
> To: wiscomik...@yahoo.com ; cnc-list@cnc-list.com
> Sent: Monday, June 02, 2014 2:53 PM
> Subject: Re: Stus-List LF 38 Mast Wedge Dimensions
>
> Mike,
>
> On my 35/3 the pieces are about 5 1/2 inches by 2 by 1/4 inch. There are 2
> or 3 on each side of m
e block at the top is about 1 1/2" thick.
Gary
much smaller boat
- Original Message -
From: Joel Aronson via CnC-List
To: wiscomik...@yahoo.com ; cnc-list@cnc-list.com
Sent: Monday, June 02, 2014 2:53 PM
Subject: Re: Stus-List LF 38 Mast Wedge Dimensions
Mike,
On my
Mike,
On my 35/3 the pieces are about 5 1/2 inches by 2 by 1/4 inch. There are 2
or 3 on each side of mast. Starboard works better than plywood.
Good luck!
Joel
35/3
Annapolis
On Mon, Jun 2, 2014 at 2:37 PM, wiscomik...@yahoo.com via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi all, I'm lau
