ners, cnc-list"
Sent: Tuesday, August 12, 2014 3:54:45 PM
Subject: Re: Stus-List Engine stalling after shifting
Dave,
How low is the idle speed?
Joel
On Tue, Aug 12, 2014 at 3:49 PM, David Knecht via CnC-List
wrote:
The Universal M4-30 in my boat tends to stall freque
ess vibration and no stalling.
>
> Chuck
> Resolute
> 1990 C&C 34R
> Broad Creek, Magothy River, Md
>
> --
> *From: *"CNC boat owners, cnc-list"
> *To: *"David Knecht" , "CNC boat owners,
> cnc-list"
> *Sent: *
Sent: Tuesday, August 12, 2014 3:54:45 PM
Subject: Re: Stus-List Engine stalling after shifting
Dave,
How low is the idle speed?
Joel
On Tue, Aug 12, 2014 at 3:49 PM, David Knecht via CnC-List <
cnc-list@cnc-list.com > wrote:
The Universal M4-30 in my boat tends to stall freq
I got a laser-tach from Amazon for ~$20. It came with reflective tape
which you cut to size. I put a piece on the main pully and transmission
output shaft. I used it to make sure of the accuracy of the installed tach
and verify the gear ratio. Then I also used it to set the low idle speed.
Low
I had the same problem and did two things.
1. I made sure the fuel system was well bled A small amount of air
trapped in the high pressure lines can create a lot of trouble with idle
and stalling.
2. The second thing I did was add Howe's diesel fuel treatment to the fuel
every time I fill up.
Dave,
How low is the idle speed?
Joel
On Tue, Aug 12, 2014 at 3:49 PM, David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> The Universal M4-30 in my boat tends to stall frequently when shifting.
> This primarily happens when moving forward and shifting into reverse,
> which is of cour
