Re: Stus-List C&C 35 Mark III

Probably didn't know the words. Sorry quarantine humor. We had a Venture 21 and the cable to the centerboard would hum at a certain speed. There has to be something moving (vibrating) to get noise. Could you try putting it in gear and try different positions of the prop? Ron Wild Cheri C&C 30-1

Re: Stus-List C&C 35 Mark III

manuals call >> for a neutral gear, when sailing. Iirc, Yanmar had a special bulletin where >> they said that if you don't sail in neutral, they would void your warranty >> (like this really matters for our boats). >> >> >> >> Marek >> >> &

Re: Stus-List C&C 35 Mark III

t; > > George Cone > > 1981 C&C 40 > > > > *From:* CnC-List *On Behalf Of *Marek > Dziedzic via CnC-List > > > *Sent:* Wednesday, June 17, 2020 2:42 PM > *To:* cnc-list@cnc-list.com > *Cc:* Marek Dziedzic > *Subject:* Re: Stus-List C&C 35 Mark III >

Re: Stus-List C&C 35 Mark III

Our 27-III, Atomic 4, Martec . Always in reverse when sailing. Sent from Mail for Windows 10 From: Robert Abbott via CnC-List Sent: June 17, 2020 7:27 PM To: cnc-list@cnc-list.com Cc: Rober

Re: Stus-List C&C 35 Mark III

Hi Dwight, No more hum. Hum is a speed robber. Like I stated, the noise is gone since upgrading to wheel and adding grease fittings to the rudder bearings. 7.3 seems to be her sweet spot going upwind. If she has a clean bottom and wind over 8 knots, she will make her own wind and accelerate

Re: Stus-List C&C 35 Mark III

, 2020 5:45:40 PM To: cnc-list@cnc-list.com Cc: dwight veinot Subject: Re: Stus-List C&C 35 Mark III Chuck. That must have been awesome. Above 7 kts and she starts singin she’s happy. Does she sing often? On Wed, Jun 17, 2020 at 10:59 AM CHARLES SCHEAFFER via CnC-List mailto:cnc-list

Re: Stus-List C&C 35 Mark III

Chuck. That must have been awesome. Above 7 kts and she starts singin she’s happy. Does she sing often? On Wed, Jun 17, 2020 at 10:59 AM CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Resolute had rudder "hum: when we first brought her home. It started when > we were sailing ab

Re: Stus-List C&C 35 Mark III

the Transmissions. > > Bill > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com > <mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of schiller via CnC-List > Sent: Wednesday, June 17, 2020 12:09 PM > To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com&g

Re: Stus-List C&C 35 Mark III

ears the accepted recommendation was to put it into > Reverse? > > > > George Cone > > 1981 C&C 40 > > > > *From:* CnC-List *On Behalf Of *Marek > Dziedzic via CnC-List > *Sent:* Wednesday, June 17, 2020 2:42 PM > *To:* cnc-list@cnc-list.com > *Cc:* Marek

Re: Stus-List C&C 35 Mark III

I thought over the years the accepted recommendation was to put it into Reverse? George Cone 1981 C&C 40 From: CnC-List On Behalf Of Marek Dziedzic via CnC-List Sent: Wednesday, June 17, 2020 2:42 PM To: cnc-list@cnc-list.com Cc: Marek Dziedzic Subject: Re: Stus-List C&C 35 Mark III

Re: Stus-List C&C 35 Mark III

-list.com Cc: Marek Dziedzic Subject: Re: Stus-List C&C 35 Mark III Most (as in "check your transmission manual") transmission manuals call for a neutral gear, when sailing. Iirc, Yanmar had a special bulletin where they said that if you don't sail in neutral, they would void your

Re: Stus-List C&C 35 Mark III

-- Original message From: Bill Coleman via CnC-List Date: 2020-06-17 13:05 (GMT-05:00) To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List C&C 35 Mark III I see. I just mention it, because I think from past discussions there was mention that shafts spinning in neutr

Re: Stus-List C&C 35 Mark III

-list@cnc-list.com Cc: schiller Subject: Re: Stus-List C&C 35 Mark III Bill, It is a two blade fixed prop. It spins! The singing is probably around 400 hz. I might use my phone with the db app and find what actual frequency it is. It is not a concerning sound, just wondered if we

Re: Stus-List C&C 35 Mark III

*On Behalf Of *schiller via CnC-List *Sent:* Wednesday, June 17, 2020 7:38 AM *To:* cnc-list@cnc-list.com *Cc:* schiller *Subject:* Re: Stus-List C&C 35 Mark III Ron, Yes.  We sail with the transmission in neutral and can tell that the shaft is spinning.  We noted it the day that we sailed

Re: Stus-List C&C 35 Mark III

Resolute had rudder "hum: when we first brought her home. It started when we were sailing above 7knots. I could hear it and also feel it through the tiller. There was a little bit of play in the rudder shaft and it all went away after I installed grease fittings and greased the rudder shaft a

Re: Stus-List C&C 35 Mark III

, 2020 10:45 AM To: cnc-list Cc: Joel Aronson Subject: Re: Stus-List C&C 35 Mark III The Office would hum at 6 knots. Joel On Wed, Jun 17, 2020 at 9:41 AM Bill Coleman via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I don’t think your shaft should be spinning. Can’t you put it in

Re: Stus-List C&C 35 Mark III

ave a folding prop – > > > > Bill Coleman > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of > *schiller > via CnC-List > *Sent:* Wednesday, June 17, 2020 7:38 AM > *To:* cnc-list@cnc-list.com > *Cc:* schiller > *Subject:* Re: Stus-

Re: Stus-List C&C 35 Mark III

, 2020 7:38 AM To: cnc-list@cnc-list.com Cc: schiller Subject: Re: Stus-List C&C 35 Mark III Ron, Yes. We sail with the transmission in neutral and can tell that the shaft is spinning. We noted it the day that we sailed here home almost three years ago. We tried to locate the source whe

Re: Stus-List C&C 35 Mark III

Ron, Yes.  We sail with the transmission in neutral and can tell that the shaft is spinning.  We noted it the day that we sailed here home almost three years ago.  We tried to locate the source when we first heard it but can't really locate the source.  She sings on both tacks.  It doesn't co

Re: Stus-List C&C 35 Mark III

Does it always happen at that speed; in other words, does a different alignment of the prop change anything? Ron Wild Cheri C&C 30-1 STL On Tuesday, June 16, 2020, 08:11:05 PM CDT, Graham Collins via CnC-List wrote: Hi Neil No singing on hull #11.  We originally had a 2 blade fix

Re: Stus-List C&C 35 Mark III

Hi Neil No singing on hull #11.  We originally had a 2 blade fixed prop, and now are running a Kiwi Prop. Graham Collins Secret Plans C&C 35-III #11 On 2020-06-16 7:22 p.m., schiller via CnC-List wrote: OK Mark III owners, our C&C 35-3 "signs" with speeds between about 4.5 to 5 knots.  It is

Re: Stus-List C&C 35 Mark III

Spell check is your worst enema!  should read "sings" On 6/16/2020 6:22 PM, schiller via CnC-List wrote: OK Mark III owners, our C&C 35-3 "signs" with speeds between about 4.5 to 5 knots.  It is a definite harmonic signing that I have never been able to isolate.  We have a 2 blade fixed prop an

Re: Stus-List C&C 35 Mark III

Tim Someone is going to get a great boat! Joel On Saturday, October 3, 2015, Tim Goodyear via CnC-List < cnc-list@cnc-list.com> wrote: > I have decided to sell my 1984 C&C 35 Mark III, Mojito, with a heavy > heart. > > I'll be selling through a broker, but wanted to share this with the list > i