Stus-List Re: Potential "Next" Boat - Keel Issue ?'s

Look at the aft end of the keel internally. Is it pushed up? Run. Sent from my Android. Please forgive typos. Thank you. From: nausetbe...@optonline.net Sent: Monday, September 28, 2020 4:47:35 PM To: 'Stus-List' Subject: Stus-List Potential "Next" Boat - Keel

Stus-List Re: Potential "Next" Boat - Keel Issue ?'s

Hard to tell from the photo but I had a boat surveyed and the keel looked similar to your picture. The surveyor looked aft of the keel, and went inside and promptly removed all the floor boards. It had a grounding, and from what he said had a very poor (cosmetic) repair done. /John > On Sep 2

Stus-List Re: Potential "Next" Boat - Keel Issue ?'s

I had a smile like that on my Viking 33. I had the yard patch it up, when they blasted all the old paint off, and it never reappeared during my ownership of 5 years. The repair was not at all expensive as I recall. You'd still do well with a good survey if you really wanted to buy the boat.

Stus-List Re: Mast painting

Seem like I remember an old saying, “old paint that doesn’t want to come off is your best primer” I did mine in 2018, did what you said as far as sanding and such, and gave it a good coat rolled and tipped. Well, not exactly. I was rolling it on with a 4” roller, and it was taking too long, a

Stus-List Re: Potential "Next" Boat - Keel Issue ?'s

I would have a very good look at this one before buying. This looks to me like a rough prior repair exposing itself but hard to say. It does not look as though it came from the builder that way. If it were me I would check the where the keel bolts land but also the structure around it - the f

Stus-List Re: Potential "Next" Boat - Keel Issue ?'s

Judging by the aft section, it doesn’t seem to have shifted aft. Looks more like the front keel bolts needed tightening for quite awhile, and weren’t . Bill Coleman Entrada, Erie, PA From: nausetbe...@optonline.net [mailto:nausetbe...@optonline.net] Sent: Monday, September 28, 20

Stus-List Re: Potential "Next" Boat - Keel Issue ?'s

Anything can be repaired, but I wouldn't undertake that job - I would walk away. It is quite possible that the structural stringers in the bottom of the hull have been broken. On the other hand, if you can verify that structurally everything is sound, it might just need some patching and fairi

Stus-List Potential "Next" Boat - Keel Issue ?'s

I looked at a boat yesterday that seemed like a good contender for a “next” boat, right up until just prior to leaving I looked more closely at the keel and found something that does not look particularly good. I am hoping for some sage advice from the list, as in a) walk away, or b) might be repa

Stus-List Boat striping tape supplier

The effort to get Touche' repaired from Hurricane Sally damage is progressing. Due to the large number of boats needing repair, the contractor is running full speed. One critical item needed is new cove stripe tape. 3M is discontinuing their striping tape. The 5/8 inch width which fits the cove

Stus-List Re: Digest emails

Stu, MSN is the carrier. Use “Stus-List cnc-list@cnc-list.com” as the redirect. Still getting emails to Junk and normal inbox and a few to the redirect… From: Stu Sent: Monday, September 28, 2020 9:02 AM To: Stus-List Subject: Stus-List Digest emails Tom – I

Stus-List Re: cheap hatch leak fix

I painted a thin line around the corner on the outside where the glass meets the frame. It is not invisible like the Creeping Crack Cure, but it beats getting dripped on every night, it was about aimed to land right on my head ☹ Anyway, if you want it to not really show you might get an artistic

Stus-List Re: cheap hatch leak fix

did you paint it right onto the glass where it goes into the frame Joe? Outside I'm guessing not inside? Wade Oh Boy 33-2 Lake of the Woods On Mon, Sep 28, 2020 at 8:08 AM Joe Della Barba wrote: > My 47 year old original hatches will sometimes leak around the screws. I > have been sealing them

Stus-List cheap hatch leak fix

My 47 year old original hatches will sometimes leak around the screws. I have been sealing them with Creeping Crack Cure to good effect, but one corner of one hatch just would not quit dripping. I just happened to have some Liquid Rubber for electrical connections sitting around and had an idea

Stus-List Re: Digest emails

Stu, MSN is the carrier. Use “Stus-List cnc-list@cnc-list.com” as the redirect. Still getting emails to Junk and normal inbox and a few to Redirect… From: Stu Sent: Monday, September 28, 2020 9:02 AM To: Stus-List Subject: Stus-List Digest emails Tom – I do n

Stus-List Digest emails

Tom – I do not have an immediate answer. Do you have another machine (laptop, tablet, desktop) that you can try and with another mail server? or: - change from digest to individual messages and see how they come through - have you tried another mail program – internet based such as mail.com I a

Stus-List Re: 37+ Cruise Speed

I had my mast repainted with an epoxy paint about eight years ago. I don’t recall the brand. It was important to use a primer and to apply the primer in certain weather conditions (due to aluminum), but we still had some adhesion problems. The smartest thing I did was select a color that look

Stus-List Re: Toe rail mounted stanchion base

South shore yachts has them, https://southshoreyachts.com/ . Paul From: Luke Wolbrink Sent: Sunday, September 27, 2020 6:06:46 PM To: cnc-list@cnc-list.com Subject: Stus-List Toe rail mounted stanchion base Looking for a replacement for the cast aluminum stanchi

Stus-List Re: Gmail spam emails

Gmail worked great before the so-called upgrade whatever that was about. List emails are again ending up in spam. Bye for now its a pita On Sun, Sep 27, 2020 at 12:26 PM Stu wrote: > > > > > > > > > Well the problem is NOT with our list or with our list programs -- It > > is Gmail. > > > > > >