Re: Stus-List Source for Water Tank for C&C 32?

It appears that you are doing it right. Welcome to the list! You can plastic weld the crack pretty easy and you won't have to remove the tank from the boat or pay for shipping. A courtesy which we extend to one another is signing off in a manner similar to the following. Josh Muckley S/V Sea Ha

Re: Stus-List Source for Water Tank for C&C 32?

Hi Andrew Might be worth pulling the tank and seeing if there is a local plastics fabricator who could weld it for you. Graham Collins Secret Plans C&C 35-III #11 On 2020-07-10 11:20 p.m., Laserandy via CnC-List wrote: First post, hope I'm doing this right. We just got a C&C 32. Took our fi

Re: Stus-List Source for Water Tank for C&C 32?

Pull the tank. There should be a label with the manufacturer and model number. On Fri, Jul 10, 2020 at 7:21 PM Laserandy via CnC-List < cnc-list@cnc-list.com> wrote: > First post, hope I'm doing this right. > > We just got a C&C 32. Took our first cruise last weekend, but discovered > while fil

Stus-List Source for Water Tank for C&C 32?

First post, hope I'm doing this right. We just got a C&C 32. Took our first cruise last weekend, but discovered while filling the water tank that there’s at least one crack toward the top (went below to find the sound of a gentle waterfall). Does anyone know of a good source for a replacement

Re: Stus-List Boom tent

10-12 foot aluminum tent poles with bungees aren't terribly pricey. They fold up small for storage. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Fri, Jul 10, 2020 at 4:06 PM Charlie Nelson via CnC-List < cnc-list@cnc-list.com> wrote: > My boom tent is similar and I found that using the ext

Re: Stus-List Boom tent

My boom tent is similar and I found that using the extension poles sold at Lowes/etc. (for reaching high lightbulbs for replacement) collapse to reasonable lengths at much lower cost than a 'marine' equivalent. Charlie Nelson -Original Message- From: Shawn Wright via CnC-List To: cnc-l

Re: Stus-List Puspit Gate Options

Replace with a wire gate and a pelican hook on one end, eye fitting on other? Keep ladder outside gate. Charlie NelsonWater Phantom1995 C&C 36XL/kcb -Original Message- From: Andrew Means via CnC-List To: cnc-list@cnc-list.com Cc: Andrew Means Sent: Fri, Jul 10, 2020 2:35 pm Subject:

Re: Stus-List Puspit Gate Options

Thanks all! I'll check out those parts *and* contact Whitewater and keep everybody posted with the direction I take. Andrew On Fri, Jul 10, 2020 at 12:27 PM Dennis C. via CnC-List < cnc-list@cnc-list.com> wrote: > :o. What? I am absolutely gobsmacked that someone would not agree with > me 100%

Stus-List Diesel tank replacement on CNC 34

Hi all - Wanted to share my experience replacing our diesel tank on our '77 CNC 34 and ask a quick couple questions. I'll ask the questions first and then give the whole story: 1. I hooked the leads from the sender on our new tank

Re: Stus-List Puspit Gate Options

:o. What? I am absolutely gobsmacked that someone would not agree with me 100%! :) Seriously, Matt, good points. I visualized cutting the upper tube close to the vertical support. Like maybe 2" out. That would leave a rather long wire gate but would minimize the opportunity for someone to be

Re: Stus-List Puspit Gate Options

Twice today I am not in 100 percent agreement with Dennis (which is rare). As I looked at the hinge side of the tube, it appears to be bent downward a bit. If the tube at that location is not supported at all, I would not be surprised if someone grabs the pulpit and bends the tube. If you are

Re: Stus-List Boom tent

I bought a small tarp and put it over the boom and bungeed it to the lifelines. Have not used it often, but dirt cheap and worked fine when we needed some sun protection in the cockpit. Dave S/V Aries 1990 C&C 34+ New London, CT > On Jul 10, 2020, at 3:00 PM, Shawn Wright via CnC-List > w

Re: Stus-List Boom tent

A common method around here is to use 3/4" or 1" PVC pipe across the boom, pulled down to the toerail with lines to create a curved surface for a tarp or canvas to lay over. The nicer ones will have channels sewn into the fabric to insert the tubing. Very light, cheap, and reasonable easy to setup,

Re: Stus-List Puspit Gate Options

Andrew, Cut off the horizontal tube where you want and install Sea Dog SD270500 stanchion eyes in the tube. Secure them with a machine screw. They look like the cap on the picture you linked to. From there, you can build a wire with pelican hooks on each end. Done. If you want to save a few b

Re: Stus-List Puspit Gate Options

Very amateur job by PO. Looks like he or she purchased and mounted the stern ladder, then cut the stern pulpit and jury-rigged the rest. It might be dangerous to rely on. Your wire gate idea is a good one. That’s what I currently have, which was built into the stern pulpit. I suggest con

Re: Stus-List Stove 35MK 1

And the question is...where do you refill the cng? Do you have one of the pressure adapters Jim Schwartz SEA YA !Sent from my Verizon, Samsung Galaxy smartphone Original message From: "Della Barba, Joe via CnC-List" Date: 7/10/20 1:59 PM (GMT-05:00) To: cnc-list@cnc-list.com

Re: Stus-List HilleRange stove parts - now 35-1 alcohol stove

The 1972 Cal 33 I grew up on also had an alcohol stove (I believe it still does). We also had a bicycle pump for pressurizing. The problem we found is that only people who know how to start it should be trusted doing so. You begin by putting liquid alcohol in the “bowl” (or whatever it’s call

Stus-List Puspit Gate Options

Hi all - our C&C 34 has a bit of a hurry rigged pushpit gate to accommodate our swim ladder. The gate is constantly coming undone and is a liability. Here are some photos: Gate Hinge

Re: Stus-List HilleRange stove parts - now 35-1 alcohol stove

Glen, The 35-1 stoves were pressurized alcohol. We still use ours. The Admiral teaches an outdoor base camp cooking class for the Louisiana Wildlife and Fisheries Department so we not only are familiar with pressurized alcohol stoves we kinda like them. :) The instructions for using them are p

Re: Stus-List Stove 35MK 1

Yikes! I was SO glad to get that alcohol stove off the boat and into the dumpster. I think it was the single best boat improvement project ever for both comfort and safety. I have been using CNG for decades now. Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com From: CnC-List [mailto:c

Re: Stus-List Stove 35MK 1

And? You want to sell it On Fri, Jul 10, 2020 at 1:08 PM Hervey Machen via CnC-List < cnc-list@cnc-list.com> wrote: > On the 1972 35MK 1 we have the alcohol stove. > Hervey Machen > 72 35MK I > ___ > > Thanks everyone for supporting this list with your

Stus-List Stove 35MK 1

On the 1972 35MK 1 we have the alcohol stove. Hervey Machen 72 35MK I ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -

Re: Stus-List Refinishing cabin floor

I just did this on my floor panels inside and the companion ways steps that I completely refinished. I wanted to keep the wood semi gloss finish but then taped off specific patches in areas of concern and sprinkled a rubber granule called Soft Sand in between coats. Came out wonderful! Pictures are

Re: Stus-List Throttle cable replacement

It's not that difficult. I spoke directly with Will Keene at Edson Marine and he got me all the parts plus took the time to walk me through it step by step. Great guy!! On Tue, Jul 7, 2020, 10:40 PM Adam via CnC-List wrote: > Very timely as I have been debating changing both the throttle and cl

Re: Stus-List HilleRange stove parts

That makes sense. Right now that is where the fridge compressor is located. I was wondering why there was copper tubing cut behind the stove. Do you have an Atomic 4? If so, do you have and concerns about open flames, etc. Glen Eddie Tel: 416-777-5357 Fax: 1-888-812-2557 Torkin Manes L

Re: Stus-List HilleRange stove parts

Glen, I can speak to the 35 Mk2 and I believe was he same stove for the Mk1.  It is a pressurized alcohol with the alcohol tank being mounted on the forward bulkhead of the cockpit locker. Don Kern /Fireball /C&35 Mk2 Bristol, RI On 7/10/2020 9:04 AM, Glen Eddie via CnC-List wrote: Does anyo

Re: Stus-List HilleRange stove parts

Ok thanks anywaySent from my Verizon, Samsung Galaxy Tablet Original message From: ahycrace via CnC-List Date: 7/10/20 8:47 AM (GMT-05:00) To: cnc-list@cnc-list.com Cc: ahycrace Subject: Re: Stus-List HilleRange stove parts BrianI have a stainless steel hillerange not sure o

Re: Stus-List HilleRange stove parts

The control in backSent from my Verizon, Samsung Galaxy Tablet Original message From: ahycrace via CnC-List Date: 7/10/20 8:47 AM (GMT-05:00) To: cnc-list@cnc-list.com Cc: ahycrace Subject: Re: Stus-List HilleRange stove parts BrianI have a stainless steel hillerange not sur

Re: Stus-List HilleRange stove parts

Does anyone know whether the original stoves on the C&C 35 Mk I were alcohol or propane? Just like at home, I have never tried to use it😉. I don’t even know if it works. I do know that I do not have a propane locker. Glen Eddie Tel: 416-777-5357 Fax: 1-888-812-2557 Torkin Manes LLP Barr

Re: Stus-List HilleRange stove parts

Good morning, Someone just got that part. Sorry about that. On Fri, Jul 10, 2020, 8:44 AM ahycrace via CnC-List wrote: > Brian > I have a stainless steel hillerange not sure of the model. The control > wingback of the oven knob is frozen I need that control assembly. Is your > stove a stainles

Re: Stus-List HilleRange stove parts

BrianI have a stainless steel hillerange not sure of the model. The control wingback of the oven knob is frozen I need that control assembly.  Is your stove a stainless steel model and could I send you a picture of the part I need. I would be happy to send Stu a contribution as payment.Sent from