Dave,
Good question. I keep mine down below on the ledge in the quarter berth. I
should wire tie the wrenches to it as well: I suspect the wheel would need to
be removed also, even then I am not sure how much leverage you could get on
that tiller with the binnacle still there. I need to actuall
I switched all the bulbs in my instrument lights (fuel gauge, etc) to red LEDs
and they go on with the ignition. They don't affect my night vision and, even
though they are on during the day when the engine is running, they draw
negligible amperage.
Bob
Bob Boyer
s/v Rainy Days
C&C Landfall 3
Last winter I rewired the mast and redid all the connections for nav and
instrument lights. The boat originally came with a pull-switch by the engine
control panel to turn on the compass light (now LED) and the instrument lights
on the original Moor speed and depth (which still work…); to that,
I believe they are "elbow catches" from PERKO, their part number
1021DP0BLK.
Bill
MYSTY
Landfall 39
Deltaville, VA.
In a message dated 7/31/2016 8:51:04 P.M. Eastern Daylight Time,
cnc-list@cnc-list.com writes:
Greetings,
Who knows a source for parts/replacements/etc. for the draw
Greetings,
Who knows a source for parts/replacements/etc. for the drawer pulls on our
1978-vintage C&C 36? Some of the springs and stuff are missing/broken.
Thank you,Richard
___
This list is supported by the generous donations of our members. If you li
That's what I did -- connected to the running lights.
All the best,
Edd
---
Edd M. Schillay
Starship Enterprise
NCC-1701-B
C&C 37+ | City Island, NY
www.StarshipSailing.com
---
914.332.4400 | Office
914.774.9767 | Mobile
---
A C&C 115 won 2nd in spinnaker class in the 2016 Around Long Island race. 190
nm.
PHRF - Spinnaker Division 7 - Warning Signal 1530
1 USA 52361 Frequent Flyer Beneteau First 36.7 Alistair Duke
84.030/Jul/16 - 08:38:151:17:03:15 1:12:37:15 1
Josh,
If I had to replace the switch for the compass light or rewire it, I’d consider
powering it off the navigation lights. I think the connection on a 37+ could
easily be made in the lazarette which already has power to the stern light.
This wouldn’t be much different than the dash light
This has bugged me since I bought the boat. The wrenches are currently
cable-tied to the tiller and the tiller is tied to the hold down straps on the
fuel tank. Not a fan really, and I don't like needing tools for such a thing.
Thoughts/advice from those more evolved than I?
Many thanks,
This list is supported by the generous donations of our members. If
> you like what we do, please help us pay for our costs by donating. All
> Contributions are greatly appreciated!
>
>
-- next part --
An HTML attachment was scrubbed...
URL:
<ht
I like having the option to control lights in the cockpit. I installed a
Blue Sea Systems 3 switch Contura style panel in a bulkhead near the helm
station. On that panel is the compass light, the engine compartment blower
(not really needed since the repower to a diesel) and the fuel gauge. The
I used the existing compass light wiring to power my Raymarine e7 MFD. don't
use the binnacle compass much anyway and never at night.
Seems to be fine.
Tom Buscaglia
S/V Alera
1990 C&C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Jul 31, 2016, at 9:00 AM, cnc-list-requ...@cnc-list.com
My gps wires go to a terminal board. I conveniently used the 12v terminal
from that. My compass light is LED, so yes now whenever the gps is on, the
compass light is on. It uses and extra 0.1amps during the day when you
don't necessarily need it.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons,
Wrapping up Windstar's electrical work and I notice one, final, hokey, length
of wire-with-hidden-glass-fuse - the binnacle light. This was wired to the
12v hot wire on the starter, back to a big clunky pull switch awkwardly mounted
at the engine control panel, and thence to the pedestal.
My f
Hi, Don’t forget that these units are not ordered with next-day shipping;
they are pre-ordered, with a substantial discount for paying in advance (as
noted on the online shopping cart page where you order).
Pre-ordering with is common for new technology products these days, whether
Tesla c
15 matches
Mail list logo
