documentation (https://www.clamav.net/documents/) and the
Archives and finding no solution, I decided to ask the community.
Please find attached the full Clamscan error log and my trial to update the
database manually. Please find the log output below (between #START and
#END). Thanks in advance.
Hi Tom,
Thanks for this timely reply. Could you provide a solution or link to
update the database by myself?
Best regards,
George
2017-12-06 16:57 GMT+02:00 Thomas McCourt (tmccourt) :
> Hello George,
>
> I will look into those mirrors to see if they are down. IF a mirror is not
>
Thanks, but this doesn't update the daily.cvd. Should I wait for you to fix
the mirros or can I do something myself? Sorry for bothering you, but if
there was some guide on what to do in such cases, I would use it myself.
Best regards,
George
2017-12-06 18:32 GMT+02:00 Thomas McCourt (tmc
?
Best regards,
George
___
clamav-users mailing list
clamav-users@lists.clamav.net
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Help us build a comprehensive ClamAV guide:
https://github.com/vrtadmin/clamav-faq
http://www.clamav.net/contact.html#ml
k for new database 24 times a day
Checks 24
DatabaseMirror db.local.clamav.net
DatabaseMirror database.clamav.net
SafeBrowsing Yes
>>
Best regards,
George
2017-12-13 21:17 GMT+02:00 Thomas McCourt (tmccourt) :
> Hey George,
>
> What does your freshclam.log file say? Any errors generating
clamav.net
SafeBrowsing Yes
>>
Again, couldn't someone who understands this write a step-by-step article
with explanations on how to download databases and update mirrors manually?
Best regards,
George
___
clamav-users mailing list
clamav-users@li
Hi,
I mistakingly copied this twice in the email. But I did it as in your
reply. that's not the problem.
Thanks,
George
2017-12-14 18:39 GMT+02:00 Dennis Peterson :
> you are downloading main.cvd twice. Change one of the wget commands to
> download daily.cvd.
>
>
t
Giving up on database.clamav.net...
Update failed. Your network may be down or none of the mirrors listed in
/etc/clamav/freshclam.conf is working. Check
http://www.clamav.net/doc/mirrors-faq.html for possible reasons.
I don't know what to do here.
Best regards,
George
2017-12-14 18:53 G
did you just say that clamav doesn’t have write permissions to
> the databases? That /would/ explain why freshclam can’t save the new
> database files.
>
>
> Micah Snyder
> Software Engineer
> Talos
> Cisco Systems, Inc.
>
>
>
> On Dec 15, 2017, at 4:52 AM, George
y database.
Thanks again Tom M. You are the best!
Merry Christmas and Happy New Year!
Best regards,
George
2017-12-15 16:20 GMT+02:00 Thomas McCourt (tmccourt) :
> Hello George,
>
>
> 1) Did you delete mirror.dat, then re-run freshclam?
> 2) Did you include in your freshclam.con
I'm running Exim 4.5 with ClamAv 0.83
I was wondering what is happening when you get the following warning,
or better yet - why is it happening?
Thu Mar 10 11:57:51 2005 -> WARNING: ScanStream: Size limit reached (
max: 10485760)
Thanks
___
http://lur
In the end, make fails with:
In file included from ./zziplib/zzip.h:21,
from zziplib/zzip-dir.c:18:
./zziplib/zziplib.h:91: error: parse error before "zzip_ssize_t"
./zziplib/zziplib.h:91: warning: data definition has no type or storage class
./zziplib/zziplib.h:194: error: parse e
defender doesn't detect this issue and
http://virusscan.jotti.org/ shows that 789cfb.msp is virus free with all
programs except clam, I think this is a false positive.
see http://wsms.wikiplanet.com/mediawiki/index.php/Clamscan for
additional details.
Please advise.
Thanks, G
Hi,
Just try to update my Clam AV and receive problem, listed below,
Any ideas? "git: not found" - git?
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I./nsis -I./lzma
-I../libltdl -DWARN_DLOPEN_FAIL -I/usr/local/include -I/usr/local/include
-DSEARCH_LIBDIR=\"/usr/local/lib/elf\" -g -O2 -
https://wwws.clamav.net/bugzilla/show_bug.cgi?id=2225
___
George R. Kasica | Systems Analyst – Technical Services | Mortgage
Guaranty Insurance Corporation
270 E. Kilbourn Ave. | Milwaukee, WI 53202 USA | ( 1.414.347.6491(work)
1.414.732.8503 (cell) | 7
running
tests, submitting results and no-one is even looking at the output.
Just my 2 cents from out here
___
George R. Kasica | Systems Analyst – Technical Services | Mortgage
Guaranty Insurance Corporation
270 E. Kilbourn Ave. | Milwaukee, WI 53202 USA | ( 1.41
es for Torok if no-one is looking at what is coming back from
them.
George
_______
George R. Kasica | Systems Analyst – Technical Services | Mortgage
Guaranty Insurance Corporation
270 E. Kilbourn Ave. | Milwaukee, WI 53202 USA | ( 1.414.347.6491(work)
have a
serious problem
___
George R. Kasica | Systems Analyst – Technical Services | Mortgage
Guaranty Insurance Corporation
270 E. Kilbourn Ave. | Milwaukee, WI 53202 USA | ( 1.414.347.6491(work)
1.414.732.8503 (cell) | 7 1.888.601.4440 or 1.41
can we on a sytem admin end do to help this process in the future
because frankly I'm at a loss, I'm not (and have no desire to be) a
programmer hacking code.
In any case its a past event and something to keep in mind next time
probably.
Thanks for the fish,
George
k2_clamd.sh
PASS: check3_clamd.sh
FAIL: check4_clamd.sh
SKIP: check5_clamd_vg.sh
SKIP: check6_clamd_vg.sh
SKIP: check7_clamd_hg.sh
SKIP: check8_clamd_hg.sh
SKIP: check9_clamscan_vg.sh
___
George R. Kasica | Systems Analyst – Technical Services | Mortgage
Guaranty Insur
ng the email lists allowed after 3 years
on my internal mail vs. home email.
___
George R. Kasica | Systems Analyst – Technical Services | Mortgage
Guaranty Insurance Corporation
270 E. Kilbourn Ave. | Milwaukee, WI 53202 USA | ( 1.414.347.6491(work)
1.414.73
Hello all!
I am tiring to update clamav from clamav-0.90.1 to clamav-0.90.2.
Configure script complete successfully but when I run make, I get after
while:
gcc -g -O2 -o .libs/clamd output.o cfgparser.o getopt.o misc.o network.o
options.o clamd.o tcpserver.o localserver.o session.o thrmgr.o serve
Ditto. Kinda slow out here in email land.
Happy Holidays everybody (especially Tomasz)!
-George
On Wed, 24 Dec 2003, Flinn Mueller wrote:
| Merry Christmas, and Yuletide greetings!
|
| Regards,
| Flinn
|
| On Dec 24, 2003, at 5:38 PM, Tomasz Kojm wrote:
|
| > On Thu, 25 Dec 2003 09:34:05 +1
[Apologies if this is a common question, but I've gone through the list
archives and searched for FAQ answer with no luck. This is a common
question on both the procmail and spamassassin lists, and I don't want
to give out bad information on such an important topic.]
Tomasz Kojm wrote:
ScanMai
Sorry if this is an old subject, but it keeps coming up again and again
on the procmail and spamassassin lists. I have tried searching archives
and the web for answers.
I noticed that there can be differences in results returned by clamscan
and clamdscan when called directly from procmail to sc
Bob George wrote:
Updating my own questions...
1. Is --mbox recommended for use for scanning mail streams (i.e. from
procmail)? Is the fixed, or to be fixed shortly?
As in "as of 0.67 it seems fixed". Also, mail options in clamd seem fine.
2. Is the lack of --mbox on clamdscan per
Tomasz Klim wrote:
This is a test message only. I'm sending it only to announce
my e-mail address to all infected e-mail clients, to provoke
them to send a copy of viruses. Don't be angry.
Go sign up on a bunch of MSN or Yahoo group lists and announce there. I
think you'll find those a much more e
through the archive of this list and found exactly the same question but
there was no answer.
Please help !!
Thanks,
George
---
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipp
I've uncommented "FixStaleSocket" in clamav.conf but it didn't solve my
problem.
George
Nigel Horne wrote:
ClamAv: Unable to bind to port local:/var/run/clamav/clamd.sock: Address
already in use.
Do you have FixStaleSocket enabled in clamav.con
Please help
thanks,
Graham
Best Regards,
--
George Chelidze
---
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http
quot;? Do I need to enable that?
If you need your clamd to be notified by freshclam, then yes, enable it.
We are using LocalSocket, not TCPSocket.
In fact it doesn't matter. freshclam will look at your settings in clamd
config file and connect to the daemon using supported mechanism.
Thanks!
J.
le 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
--
George Chelidze
---
we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
: ScanStream: Size limit reached ( max: 10485760)
Is it bounced back or pass through without scanning?
Thanks in advance.
Best Regards,
--
George Chelidze
---
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to
Hello,
Nigel Horne wrote:
On Wednesday 02 Jun 2004 06:38, George Chelidze wrote:
Also I wonder what happens to message which triggers the following warning:
WARNING: ScanStream: Size limit reached ( max: 10485760)
Is it bounced back or pass through without scanning?
That depends on the options
Hello,
Nigel Horne wrote:
On Wednesday 02 Jun 2004 12:57, George Chelidze wrote:
CLAMAV_FLAGS="-c /etc/clamav.conf -nlPH local:/ctl/clamav-milter.ctl"
That's the place - now do 'man clamav-milter' and look under the 'd' option and you'll
have your answ
amav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
--
George Chelidze
---
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference
Learn from the experts at JavaOne(SM), Sun's Worldwide
Yes we get approximately 1000 infections a day.
Best Regards,
Fajar A. Nugraha wrote:
George Chelidze wrote:
admin is notified about infection incident.
I'm guessing you only get small amount of infections (e.g. less than
10.000 a day) ?
Regards,
Fajar
--
George Che
scanning. However,
during the configure, libmilter directory cannot be located. I can't find
it either...
What do I need to do?
Tom
[EMAIL PROTECTED]
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Best Regards,
--
George Che
same
result. Any ideas?
Best Regards,
--
George Chelidze
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Tomasz Papszun wrote:
On Thu, 04 Nov 2004 at 11:48:35 +0300, George Chelidze wrote:
Hello,
I have just found a message which was trapped with sanitizer because of
dangerous attachment (message.scr) and I thought it was a new worm. I
checked it against clamav online scanner which reported the
Hello,
Fajar A. Nugraha wrote:
George Chelidze wrote:
Seems that the scanner at sendvirus.cgi uses the DetectBrokenExecutables
option while "clamav online scanner" - not.
So is it a bad idea to enable the same in online scanner? It will save
a little bandwidth...
Bad, because broken e
PROTECTED] <mailto:[EMAIL PROTECTED]>
Administrador Area Internet
Compel SRL
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Best Regards,
--
George Chelidze
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
rs a
lot, do they?
So it doesn't re-eject files without scanning just because they
seem to be broken.
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Thanks in a
Tomasz Papszun wrote:
On Wed, 10 Nov 2004 at 11:47:59 +0300, George Chelidze wrote:
Tomasz Kojm wrote:
The way libclamav works in the case of executable files is:
1. check the file against the signature database and stop scanning if
virus is found
2. run PE parser (report broken executables; try
here.
That makes me worry even more.
Maybe you miss something in your clamd/clamav-milter config files? If
you don't mind post them to this list.
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Best Regards,
--
u,
Edwin
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Best Regards,
--
George Chelidze
___
http://lists.clamav.net
From: "George Chelidze" <[EMAIL PROTECTED]>
To: "ClamAV users ML" <[EMAIL PROTECTED]>
Sent: Thursday, November 25, 2004 3:30 PM
Subject: Re: [Clamav-users] Database update question for ClamAV-Milter.
Hello,
Wtexpo.com ClamAV wrote:
Hello everyone,
I use the latest v
Hi Freddie,
On Wed, 15 Dec 2004 09:36:03 -0800, Freddie Cash <[EMAIL PROTECTED]> wrote:
> On December 15, 2004 08:57 am, Rainer Zocholl wrote:
> > In the really meanwhile long long linear list of mail scanners
> > I only see the (non GPLed) "DansGuardian Anti-Virus Patch".
> > Do you mean that?
>
Hi Russel,
On Wed, 15 Dec 2004 12:00:48 -0500, roliver <[EMAIL PROTECTED]> wrote:
> There is Safesquid and SquidClamAV_Redirector. (scavr)
>
> I use scavr with squid for a school district with great success. Neither
> Dansguardian or Safesquid can handle very heavy loads in my experience.
>
I u
bases for manual update (preferably without online, but ftp also
acceptable)?
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Best Regards,
--
George Chelidze
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
can I avoid the same in future? Thanks in
advance.
Best Regards,
--
George Chelidze
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Hello Nigel,
Nigel Horne wrote:
On Wednesday 09 Feb 2005 06:40, George Chelidze wrote:
Feb 8 23:26:10 ns clamav-milter[1141]: failed to send SCAN (null)
command to clamd
Try clamav-milter 0.82c and post the results.
Is it a known issue or just a guess?
--
George Chelidze
Hello Krištof,
Krištof Petr wrote:
George Chelidze wrote:
Hello,
I have yesterday upgraded to 0.82 on two servers (RedHat 7.3 kernel
2.4.24) yesterday morning and everything went fine. This morning I
found that on both servers clamd is running but viruses are not
detected. I run freshclam from
Hello,
Matias Lopez Bergero wrote:
George Chelidze wrote:
Hello Krištof,
Krištof Petr wrote:
George Chelidze wrote:
When it happens on next time, try to run clamdscan to check the clamd
is running fine
and problem is in clamav-milter itself.
It happened again on database reload. I followed your
3.2 Please try again later"
Try 0.82c or later.
which snapshot corresponds to 0.82c? I have tried devel-20050209 and
problem is still there, at least on my box.
-Nigel
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Best Reg
Seems devel-20050209 and devel-20050210 contain the same
clamav-milter.c. AFAIK the problem is with clamav-milter, so it wouldn't
help. Anyway, I'll give it a try...
Nigel Horne wrote:
On Thursday 10 Feb 2005 16:52, George Chelidze wrote:
Try 0.82c or later.
which snapshot correspond
Hello Clive,
Clive Messer wrote:
On Friday 11 Feb 2005 14:24, George Chelidze wrote:
Seems devel-20050209 and devel-20050210 contain the same
clamav-milter.c. AFAIK the problem is with clamav-milter, so it wouldn't
help. Anyway, I'll give it a try...
FC3 rpms rebuilt with clamav-milter
Dear Clive,
Clive Messer wrote:
On Friday 11 Feb 2005 14:53, George Chelidze wrote:
Hi George,
I don't use FC3, neither rpms. I compile it from source. Both sources
(mentioned above) seems to contain the same clamav-milter.c code, so why
the last should work and the first not. #define SE
--CUT HERE --
I placed this script into /etc/cron.hourly and it works just fine. The
command line looks a bit long because I decided to chroot
clamd/clamav-milter/freshclam under /usr/local/clamav
Best Regards,
--
George Chelidze
___
http://lurker.
rs.html
_______
http://lurker.clamav.net/list/clamav-users.html
--
George Chelidze
___
http://lurker.clamav.net/list/clamav-users.html
5
SMS: [EMAIL PROTECTED]
___
http://lurker.clamav.net/list/clamav-users.html
Best Regards,
--
George Chelidze
___
http://lurker.clamav.net/list/clamav-users.html
://lurker.clamav.net/list/clamav-users.html
Hello,
You can use online scanner at
http://test-clamav.power-netz.de to scan this files in question.
Worm.Sober.P is found in provided example.
Best Regards,
--
George Chelidze
___
http://lurker.clamav.net/list/clamav-users.html
l" process does not indicate any error.
Any help would be appreciated.
George
/bin/sh ../mkinstalldirs /usr/local/include
/usr/bin/install -c -m 644 clamav.h /usr/local/include/clamav.h
Making install in clamscan
/bin/sh ../mkinstalldirs /usr/local/bin
/bin/sh ../libtool --m
p;6
;;
"
I've flipped "no" to "yes" and it did compile and install, but the question
in my mind remains if that is OK or it's set to "no" for a reason. It
works from the command line, but not from Exim yet.
George
[ad
My AntiVir found it also, same version and vdf files:
The message has been quarantined as 3f1262dc-1965.
H+BEDV AntiVir found:
Worm/Sobig.C
F-PROT Antivirus found:
W32/[EMAIL PROTECTED]
CLAM Anti Virus found:
- Original Message -
From: "Thomas Lamy" <[EMAIL PROTECTED]>
To: <[EMA
anOLE2
ScanMail
ScanArchive
ScanRAR
ArchiveMaxFileSize 10M
ArchiveMaxRecursion 5
ArchiveMaxFiles 1000
ArchiveMaxCompressionRatio 200
--
George Chelidze
___
http://lurker.clamav.net/list/clamav-users.html
Nigel Horne wrote:
On Friday 13 May 2005 07:21, George Chelidze wrote:
Hello,
System: RH 7.3, kernel: 2.4.24, gcc 2.96
I tried to upgrade to 0.85 this morning. Everything compiled just fine,
clamd started fine but clamav-milter doesn't start. It outputs the
following in debug mode:
LibC
Nigel Horne wrote:
On Friday 13 May 2005 10:56, George Chelidze wrote:
Nigel Horne wrote:
On Friday 13 May 2005 07:21, George Chelidze wrote:
Hello,
System: RH 7.3, kernel: 2.4.24, gcc 2.96
I tried to upgrade to 0.85 this morning. Everything compiled just fine,
clamd started fine but clamav
George Chelidze wrote:
Hello,
System: RH 7.3, kernel: 2.4.24, gcc 2.96
I tried to upgrade to 0.85 this morning. Everything compiled just fine,
clamd started fine but clamav-milter doesn't start. It outputs the
following in debug mode:
LibClamAV debug: Running as user clamav (UID 101, G
Nigel Horne wrote:
On Friday 13 May 2005 11:34, George Chelidze wrote:
Nigel Horne wrote:
On Friday 13 May 2005 10:56, George Chelidze wrote:
Nigel Horne wrote:
On Friday 13 May 2005 07:21, George Chelidze wrote:
Hello,
System: RH 7.3, kernel: 2.4.24, gcc 2.96
I tried to upgrade to 0.85 this
Nigel Horne wrote:
On Friday 13 May 2005 11:52, George Chelidze wrote:
George Chelidze wrote:
Hello,
System: RH 7.3, kernel: 2.4.24, gcc 2.96
I tried to upgrade to 0.85 this morning. Everything compiled just fine,
clamd started fine but clamav-milter doesn't start. It outputs the
followi
t-scan-on-error
-ol local:/var/clamav/clmilter.socket
/etc/mail/sendmail.cf:
Xclamav, S=local:/var/clamav/clmilter.socket, F=R, T=S:10m;R:10m;E:10m
Thanks.
___
http://lurker.clamav.net/list/clamav-users.html
try --external
Best Regards,
--
Hello,
Seems something is wrong with online scanner. I tried to upload samle
.zip attachment invected with Trojan.Spy.Goldun.ah and got the following
error:
Upload did not work ... sorry
Best Regards,
--
George Chelidze
___
http
ot
and there was no /usr/sbin/sendmail, only /usr/lib/sendmail. Maybe it's
a good idea to mention this change in ChangeLog for people like me?
Thanks
--
George Chelidze
___
http://lurker.clamav.net/list/clamav-users.html
t/clam.exe
clamav-0.88.4/test/clam.exe: ClamAV-Test-File FOUND
my smtpd/clamd system uses that invocation of clamdscan. Since my
system is clearly "working", why cannot I use it on a positive
test?
// George
--
George Georgalis, systems arch
Greetings,
I have some problems with digital signatures with ClamAV 0.90.
I receiving message: "WARNING: ** GNU MP 2 or newer NOT FOUND - digital
signature support will be disabled!" when configuring ClamAV.
I DO have installed libgmp (gmp-4.2.1). With the previous version of clamav
(clam
Rene Berber
Sent: Thursday, February 15, 2007 12:42 AM
To: clamav-users@lists.clamav.net
Subject: [Clamav-users] Re: GMP MP2, digital signature FreeBSD 6.0
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
George Eliozov wrote:
> I have some problems with digital signatures with ClamAV 0.90.
>
r 1
make[3]: Leaving directory `/opt/clamav-0.95.3/libclamav'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/opt/clamav-0.95.3/libclamav'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/opt/clamav-0.95.3'
make: *** [all] Error 2
--
===[George R. Kasica]===
>On Fri, 30 Oct 2009 11:47:17 +, you wrote:
>Hi,
>
>On 2009-10-29 14:35, George Eliozov wrote:
>> Hi,
>> Just try to update my Clam AV and receive problem, listed below,
>> Any ideas? "git: not found" - git?
>>
>> libtool: compile: gcc -
>On Fri, 30 Oct 2009 21:40:46 +0100, you wrote:
>-BEGIN PGP SIGNED MESSAGE-
>Hash: SHA1
>
>On 30/10/2009 20.35, George R. Kasica wrote:
>> With the following configure after make clean and then a make 0.95.3
>> fails to build on Red Hat Enterprise Server 5
>On Fri, 30 Oct 2009 23:56:35 +0200, you wrote:
>On 2009-10-30 23:55, George R. Kasica wrote:
>>> On Fri, 30 Oct 2009 21:40:46 +0100, you wrote:
>>>
>>
>>
>>> -BEGIN PGP SIGNED MESSAGE-
>>> Hash: SHA1
>>>
>>
ory
`/home2/Linux-Software/clamav-0.95.3/libclamav'
make[2]: *** [all] Error 2
make[2]: Leaving directory
`/home2/Linux-Software/clamav-0.95.3/libclamav'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home2/Linux-Software/clamav-0.95.3'
make: *** [all] Error 2
--
==
>On Fri, 30 Oct 2009 16:56:43 -0700, you wrote:
>George R. Kasica wrote:
>> I have no idea - I just followed the zlib instructions to run
>>
>> ./configure
>> make
>> make install
>>
>> You're getting into things I don't know - I'
but somehow not the mailing list
regarding the above:
From: Török Edwin
Date: Thu Oct 29 2009 - 10:29:42 EDT
That is another issue, it is fixed by the patch I posted in another
thread. Here it is again:
http://git.clamav.net/gitweb?p=clamav-devel.git;a=commitdiff_plain;h=6238a5ca06c07931b2f6ace62601ef4380
t;regarding the above:
>
>From: Török Edwin
>Date: Thu Oct 29 2009 - 10:29:42 EDT
>
>That is another issue, it is fixed by the patch I posted in another
>thread. Here it is again:
>http://git.clamav.net/gitweb?p=clamav-devel.git;a=commitdiff_plain;h=6238a5ca06c07931b2f6ace62601
e, if you're looking for a test spot for FC10, Solaris 9,
RHEL4 I'd be happy to try to run some stuff here on a box - I'm not a
programmer but I can do basic things if given clear steps or test the
ability to at least get it to make etc in our QA/Test environment.
Let me know.
o way that our environment is going to be able to put
something newer out than what is released by the Distro
vendor.that it falls back to another mode is fine, but there's an
awful lot of RHEL5 out there that I'm betting is running that rev of
gcc that will see this error.
Geor
>On Fri, 12 Mar 2010 23:32:19 +0200, you wrote:
>On 03/12/2010 10:46 PM, George R. Kasica wrote:
>> We've compiled and are running here as well with Red Hat EL4 (gcc
>> 3.4.6-11.el4_8.1) and Red Hat EL5 (gcc 4.1.2-46.el5_4.2) both of which
>> are the latest released
eply. Falling back to HTTP mode.
Reading CVD header (main.cvd): Trying host db.us.clamav.net
(209.222.131.222)...
OK (IMS)
main.cvd is up to date (version: 52, sigs: 704727, f-level: 44,
builder: sven)
Reading CVD header (daily.cvd): WARNING: Can't read daily.cvd header
f
m working on the problem.
>
>Problem should be solved.
>
Looks good again here thank you very much!
George
--
===[George R. Kasica]===+1 262 677 0766
President +1 206 374 6482 FAX
Netwrx Consulting Inc. Jackson, WI USA
http://www.netwrx1
#1 SMP PREEMPT Sat Aug 29 07:29:36 CDT 2009
GCC 4.2.2
I'm no where near a C programmer ao if someone can help me out here
I'd appreciate it.
Also files as https://wwws.clamav.net/bugzilla/show_bug.cgi?id=2072
--
===[George R. Kasica]===+1 262 677 0766
President
>On Sat, 12 Jun 2010 11:27:26 +0100, you wrote:
>On Fri, Jun 11, 2010 at 11:24:17PM -0500, George R. Kasica said:
>> Have successfully run 0.96 here with just using
>>
>> ./configure
>> make
>> make install
>>
>> But in 0.96.1
>>
>>
Not sure of the cause both are configured and built the same
./configure
make
make install
for clam 0.96.2
Here is what the frozen machine will show - three hung scans for one
of the sane security databases - this was NOT a problem with 0.96.1.
If left to sit it will sit forever.
George
>On Wed, 18 Aug 2010 10:48:35 +0300, you wrote:
>On Tue, 17 Aug 2010 23:46:22 -0500
>George R. Kasica wrote:
>
>> Not sure of the cause both are configured and built the same
>>
>> ./configure
>> make
>> make install
>>
>> for clam 0
ug: cli_magic_scandesc: returning 0 at line 2381
LibClamAV debug: Cleaning up phishcheck
LibClamAV debug: Freeing phishcheck struct
LibClamAV debug: Phishcheck cleaned up
--
===[George R. Kasica]===+1 262 677 0766
President +1 206 374 6482 FAX
Netwrx Consulting Inc.
as the test file you are
>scanning is only a small ascii file out of interest does the same
>thing happen with llvm enabled and one of the other database files -or-
>does it ONLY fail with the junk.ndb file?
>
>Over to edwin though ;)
Fails with anything, text binary whatever as fa
>> > databases ?
>> >
>>
>>-- End Original Message --
>
>++
>| E-mail : [EMAIL PROTECTED] |
>| Annuaire des radios AM/FM/DAB : http://www.annuradio.fr/ |
>++
>
>__
Bug 935 created with config.log on it.
--
===[George R. Kasica]===+1 262 677 0766
President +1 206 374 6482 FAX
Netwrx Consulting Inc. Jackson, WI USA
http://www.netwrx1.com
[EMAIL PROTECTED]
ICQ #12862186
e[2]: Leaving directory `/opt/clamav-0.93/freshclam'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/opt/clamav-0.93'
make: *** [all] Error 2
--
===[George R. Kasica]===+1 262 677 0766
President +1 206 374 6482 FA
1 - 100 of 115 matches
Mail list logo
