Re: [chirp_users] New Daily Build

Scott, When you download from the radio, save the file (under File on the menu, Save). This is the img file. Keep it as a prudent back up. Then EXPORT (under File on the menu, export) it exports as a csv file which LibreOffice can open. Then use LibreOffice to open the file. Don't use Microso

Re: [chirp_users] New Daily Build

Scott, I find it easier to rearrange things in a spreadsheet program, like Excel. The only trouble with Excel for this is that it messes up the commas that need to stay when you edit the CSV file. so save your file to whatever you want.CSV and edit it outside of Chirp, and then open Chirp and imp

Re: [chirp_users] New Daily Build

Glenn, Yahhooo I got it. Chirp is loaded and, I have cloned my Baofeng UV-5R to the computer. I have watched a couple of videos about using Chirp to program and, well, they’re ok but, not as detailed as I would like. For instance, my Baofeng had a bunch of programming in it

Re: [chirp_users] New Daily Build

Scot, In the Chirp program, when you go into download from radio, and it gives you all the comm ports, go clear to the bottom and use the USB option. That is what I always use. HTH. Glenn - Original Message - From: Scott Raines To: chirp_users@intrepid.danplanet.com Sent: Saturday, Feb

Re: [chirp_users] New Daily Build

Plug in cable. Start Chirp. Click the down arrow next to port and try everyone listed. Leave your cable plugged in where it is. Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net On Sat, F

Re: [chirp_users] New Daily Build

On Sat, Feb 9, 2019 at 5:42 PM Scott Raines wrote: > > The trouble is, as much as I’ve been trying, I cannot find out which port is > which on my lap top. If I had the original owners manual, maybe, MAYBE I > could find a schematic on the layout but, that’s been long gone for years. > And, in a

Re: [chirp_users] New Daily Build

The trouble is, as much as I’ve been trying, I cannot find out which port is which on my lap top. If I had the original owners manual, maybe, MAYBE I could find a schematic on the layout but, that’s been long gone for years. And, in a search on the net as to how to determine what’s what, most in

Re: [chirp_users] Trouble loading Chirp on a laptop

> I don’t know which com port is which on my laptop If the device driver is installed properly, then Device Manager should tell you exactly what COM port number was assigned to your programming cable. See this page for an example of what it will look like in Windows 7. http://www.miklor.com/COM/U

Re: [chirp_users] New Daily Build

Scot, Try USB at the bottom of the port list. That is what I always use. Glenn - Original Message - From: Scott Raines To: chirp_users@intrepid.danplanet.com Sent: Saturday, February 09, 2019 3:32 PM Subject: Re: [chirp_users] New Daily Build Dennis, Well, I’ve actually made some pro

Re: [chirp_users] Trouble loading Chirp on a laptop

Yep, I realize that. I’m running Windows 8.1 and I have made some progress. I touched the WINDOWS key on the key pad and typed CHIRP. That brought me to a screen that is blank but, has choices up at the top. One being “RADIO”. I click on that one and it then says, “Download from radio”. I click

Re: [chirp_users] New Daily Build

Dennis, Well, I’ve actually made some progress. Since one of you told me to push the “Windows” tab on the keypad, and then type “chirp”. I did that and, it (the computer) now brings up a blank screen that has a few choices at the top. One of them being “Radio”. I click on that and, is then says

Re: [chirp_users] New Daily Build

Scott, You are thinking that the file you are downloading and running is Chirp. It’s not, it’s the file that installs Chirp. Once the installation is done you have to start Chirp. Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home htt

Re: [chirp_users] Trouble loading Chirp on a laptop

Scott, be aware that if you are using Windows 10, you'll have to look for Chirp in your programs. It does not load an icon on your desktop. On Sat, Feb 9, 2019 at 2:24 PM Scott Raines wrote: > Well Sir, > I most certainly appreciate you trying to help me here. I see there is an > attached file t

Re: [chirp_users] Trouble loading Chirp on a laptop

On 2019-02-09 11:08, Shon Edwards wrote: > As far as cables go, I usually use an RT Systems cable. I realize that a lot > of people want to circumvent this, but it is a foolproof way of getting from > a to b. Except that the RT Systems cable is mechanically incompatible with (at least one of)

Re: [chirp_users] New Daily Build

There's no problem with Chirp. It's Microsoft that should provide the guide for those that don't know how to install a Windows program. > On 09 February 2019 at 14:40 Scott Raines wrote: > > Chirp should make a trouble shooting section that deals with difficulty in > loading its program t

Re: [chirp_users] New Daily Build

, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190209 A list of the changes included in this build (since the last daily) follows: Changes for Build #551 [Dan Smith ] Also make ft7100 not

Re: [chirp_users] Trouble loading Chirp on a laptop

That's because you just finished installing it. Now you have to start the program. Hit the Windows key. Type 'chirp' and start the program. [image: image.png] Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net

Re: [chirp_users] New Daily Build

ttp://trac.chirp.danplanet.com/chirp_daily/daily-20190209 A list of the changes included in this build (since the last daily) follows: Changes for Build #551 [Dan Smith mailto:dsm...@danplanet.com>>] Also make ft7100 not claim that its sub devices have sub devices This was making run_tests ful

Re: [chirp_users] Trouble loading Chirp on a laptop

Well Sir, I most certainly appreciate you trying to help me here. I see there is an attached file to your email. Well, if I click on that, I get a blank page, that’s it. So, not sure what you might have been trying to display there. As for the rest of your instructions to load Chirp, same thing

Re: [chirp_users] Trouble loading Chirp on a laptop

lanet.com/chirp_daily/LATEST/chirp-daily-20190209-installer.exe > > N1EA > > On Sat, Feb 9, 2019 at 10:37 AM Rich Messeder wrote: > > > > Try this > > https://trac.chirp.danplanet.com/chirp_daily/LATEST/ > > ~R~ > > > > > > On 2019-02-09 10:14:

Re: [chirp_users] Trouble loading Chirp on a laptop

Or this, but use it today, tomorrow there will be another build. https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20190209-installer.exe N1EA On Sat, Feb 9, 2019 at 10:37 AM Rich Messeder wrote: > > Try this > https://trac.chirp.danplanet.com/chirp_daily/LATEST/ >

Re: [chirp_users] Trouble loading Chirp on a laptop

Try this https://trac.chirp.danplanet.com/chirp_daily/LATEST/ ~R~ On 2019-02-09 10:14:-0500, Dick Smith wrote: >On 2/9/19 8:18 AM, Anthony Crespo wrote: >>this link takes me nowhere? file 404 not found >> >>On Sat, Feb 9, 2019 at 12:11 AM D.J.J. Ring, Jr. >><n...@arrl.net>

Re: [chirp_users] Trouble loading Chirp on a laptop

On Sat, Feb 9, 2019 at 8:22 AM Anthony Crespo wrote: > > this link takes me nowhere? file 404 not found > Correct. It was the latest until today's build arrived. So now it has been replaced today's build. >> Here is the link to download the latest CHIRP. >> https://trac.chirp.danplanet.com/chirp

Re: [chirp_users] Trouble loading Chirp on a laptop

..@radioclub.org To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com Change the "20190206" to 20190209" in the link and it will find it.  The listed link was for a previous iteration of Chirp. Dick <>_

Re: [chirp_users] New Daily Build

interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190209 A list of the changes included in this build (since the last daily) follows: Changes for Build #551 [Dan Smith ] Also make ft7100 not claim that its sub devices have

Re: [chirp_users] New Daily Build

All versions have the same facilities and support the same radios. > On 09 February 2019 at 05:33 Ismo Lähdeaho wrote: > > Is tyt th-9800 4 meter programming made possible In Windows version > > ___ chirp_users mailing list chirp_users@intrepid.

Re: [chirp_users] Trouble loading Chirp on a laptop

this link takes me nowhere? file 404 not found On Sat, Feb 9, 2019 at 12:11 AM D.J.J. Ring, Jr. wrote: > Hello Scott, > > Here is the link to download the latest CHIRP. > > https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20190206-installer.exe > > Paste that into your browser, an

Re: [chirp_users] New Daily Build

bug fixes, and/or bugs. If you are interested in trying it, grab it > from the following location: > > http://trac.chirp.danplanet.com/chirp_daily/daily-20190209 > > > A list of the changes included in this build (since the last daily) > follows: > > Changes for Buil

Re: [chirp_users] Trouble loading Chirp on a laptop

Download a different browser. Download Google Chrome or Firefox. https://www.google.com/chrome/ You download the file in a browser, you should be opening the file in File Explorer. In Windows 10, type "File Explorer" in the search box to find it. Donwload the Chirp file to Downloads folder. Ope

[chirp_users] New Daily Build

/daily-20190209 A list of the changes included in this build (since the last daily) follows: Changes for Build #551 [Dan Smith ] Also make ft7100 not claim that its sub devices have sub devices This was making run_tests fully _skip_ it by drilling through all the sub devices to an empty list