Glenn, Yaaaaahhhhhhooooooo!!!!!!!! I got it. Chirp is loaded and, I have cloned my Baofeng UV-5R to the computer. I have watched a couple of videos about using Chirp to program and, well, they’re ok but, not as detailed as I would like. For instance, my Baofeng had a bunch of programming in it that a buddy installed from his Chirp. But, it didn’t have the National Simplex frequency. So, I manually put it in. When the radio came up on my Chirp, the National Simplex was there but, it had no name. I clicked on the box under the column “Name” and installed a name for that simplex.
But, somehow, I double clicked on that line and, ZAP, the entire line is GONE. CRAP! I’ve installed the National Simplex again and named it. But, it’s on line 34 and somehow, it’s not after 33, it’s down near 16. And speaking of that, my whole numbering system is all screwed up. How can I get the channel numbers to be lined up? That is, 1, 2, 3, 4 and so on, all the way down the line, the way they were on the radio? Scott Sent from Windows Mail From: Glenn At Home<mailto:glenner...@cableone.net> Sent: Saturday, February 9, 2019 3:59 PM To: chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Scot, In the Chirp program, when you go into download from radio, and it gives you all the comm ports, go clear to the bottom and use the USB option. That is what I always use. HTH. Glenn ----- Original Message ----- From: Scott Raines<mailto:truck28...@live.com> To: chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Sent: Saturday, February 09, 2019 4:38 PM Subject: Re: [chirp_users] New Daily Build The trouble is, as much as I’ve been trying, I cannot find out which port is which on my lap top. If I had the original owners manual, maybe, MAYBE I could find a schematic on the layout but, that’s been long gone for years. And, in a search on the net as to how to determine what’s what, most instructions say to go to Device Manager and go down the list ‘till you see “Com and or LPT. Well, as usual, nothings easy for me. I go to my Device manager and there’s NO COM PORT in that list. So, I cannot find out which one is 1, 2, 3 or 4. This is routine for me. If there’s a hard way to do something, I’ll find it and make it even harder. Scott Sent from Windows Mail From: Glenn At Home<mailto:glenner...@cableone.net> Sent: Saturday, February 9, 2019 2:56 PM To: chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Scot, Try USB at the bottom of the port list. That is what I always use. Glenn ----- Original Message ----- From: Scott Raines<mailto:truck28...@live.com> To: chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Sent: Saturday, February 09, 2019 3:32 PM Subject: Re: [chirp_users] New Daily Build Dennis, Well, I’ve actually made some progress. Since one of you told me to push the “Windows” tab on the keypad, and then type “chirp”. I did that and, it (the computer) now brings up a blank screen that has a few choices at the top. One of them being “Radio”. I click on that and, is then says “download from radio”. Yahoo, I’m getting somewhere. Then I get a screen that asks for com port, vendor and model. Well, I've got (4) com ports on my laptop and, I’m having a hard time finding out which port is which. So, I’ve tried putting the radio into different com ports and clicking download and, it keeps coming up with an error that it can’t find program. But, at least I’m farther than before. Thanks again for your assistance. I’m getting there. Scott Sent from Windows Mail From: Dennis Wage<mailto:dw...@dwage.com> Sent: Saturday, February 9, 2019 2:20 PM To: chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Scott, You are thinking that the file you are downloading and running is Chirp. It’s not, it’s the file that installs Chirp. Once the installation is done you have to start Chirp. Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net<http://hammondb3organ.net/> http://overdubs.net On Sat, Feb 9, 2019 at 2:23 PM Nigel A. Gunn G8IFF/W8IFF <ni...@ngunn.net<mailto:ni...@ngunn.net>> wrote: There's no problem with Chirp. It's Microsoft that should provide the guide for those that don't know how to install a Windows program. On 09 February 2019 at 14:40 Scott Raines <truck28...@live.com<mailto:truck28...@live.com>> wrote: Chirp should make a trouble shooting section that deals with difficulty in loading its program to new users I definitely appreciate you trying to help here. I’ll keep trying. Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail ni...@ngunn.net<mailto:ni...@ngunn.net> www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dw...@dwage.com<mailto:dw...@dwage.com> To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com<mailto:chirp_users-unsubscr...@intrepid.danplanet.com> -- Dennis M. Wage (iPhone) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net ________________________________ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glenner...@cableone.net To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com ________________________________ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glenner...@cableone.net To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
