On 10/19/2015 07:35 AM, Chris Elmquist wrote:
If we were to do these again, today, we'd need to farm out the work
to a production shop for better, more reproducible results I think.
Find a shop with a wire EDM rig--it shouldn't take too long to spit a
jig out.
--Chuck
On Monday (10/19/2015 at 10:20AM -0400), Steven Hirsch wrote:
> On Mon, 19 Oct 2015, Chris Elmquist wrote:
>
> >The photos are of the 10-hole punch. We also did a 16-hole as Dwight
> >has mentioned and he as a few of those still available.
> >
> >Dwight, I double checked the metal and we're both
We need to be able to do 32 sector 8" floppies :)
J
On Mon, 19 Oct 2015, Chris Elmquist wrote:
The photos are of the 10-hole punch. We also did a 16-hole as Dwight
has mentioned and he as a few of those still available.
Dwight, I double checked the metal and we're both mis-remembering.
It's not aluminum or stainless but just tool steel that Rus
Hey Guys--
Sorry for the delay getting this out there. I finally found the
documentation package I had put together back in 2010 and it's now on
my GDrive here,
https://drive.google.com/folderview?id=0B6A73VHTVh23MS1MVERNcUZkd1U
The photos are of the 10-hole punch. We also did a 16-hole as Dwi
On 10/16/2015 11:00 AM, Chris Elmquist wrote:
On Friday (10/16/2015 at 08:53AM -0700), Chris Osborn wrote:
I will take some photos later today and round up some of the
documentation we had for them and then send another note with links
to same.
Strange--up until about a year ago, I had a cus
On Friday (10/16/2015 at 08:53AM -0700), Chris Osborn wrote:
>
> On Oct 16, 2015, at 8:18 AM, dwight wrote:
>
> > I do still have some 16 hole 5-1/4 punches left. ( anyone want one? )
>
> I’d love to see a picture of one just to see how it was made and how it
> clamps to the disk.
I will take
Dwight wrote
--
I'd makes some slight changes if I did it again.
--
How about support for 8"? ;)
J
On Oct 16, 2015, at 8:18 AM, dwight wrote:
> I do still have some 16 hole 5-1/4 punches left. ( anyone want one? )
I’d love to see a picture of one just to see how it was made and how it clamps
to the disk.
--
Follow me on twitter: @FozzTexx
Check out my blog: http://insentricity.com
I do still have some 16 hole 5-1/4 punches left. ( anyone want one? )
Actually it was stainless and Delrin.
I'd makes some slight changes if I did it again.
It really needed two alignment pins.
It didn't need to have the envelope removed. One rotated the envelope to
expose the next hole location.
The punch aligns with the index hole since we are starting with soft-sector
media and that's the only hole we have. Then it "clamps" the media and you
rotate the punch and the media together to align each sector hole with a hole
in the template part of the punch and slam the punch pin through.
I resemble that remark ;-)
Indeed, we did not do anything for 8"
Chris
On October 15, 2015 1:36:50 PM CDT, Dennis Boone wrote:
>> I doubt it. They need to be very accurate, and one would not want to
> > open the sleeve to punch one.
>
>A set of 10- and 16-hole punching jigs were done by a lis
On 10/15/2015 02:19 PM, Jay Jaeger wrote:
So, hole by hole - what about the extra hole for the index - one
would need the jig to have an extra hole for the punch for that at
1/2 spacing.
A set of 10- and 16-hole punching jigs were done by a list member
some years ago. They work through the wi
So, hole by hole - what about the extra hole for the index - one would need the
jig to have an extra hole for the punch for that at 1/2 spacing.
Sent from my iPad
On Oct 15, 2015, at 13:36, Dennis Boone wrote:
>> I doubt it. They need to be very accurate, and one would not want to
>> open the
> I doubt it. They need to be very accurate, and one would not want to
> open the sleeve to punch one.
A set of 10- and 16-hole punching jigs were done by a list member some
years ago. They work through the window in the sleeve, so don't require
opening the sleeve. But they're for 5.25".
De
I doubt it. They need to be very accurate, and one would not want to
open the sleeve to punch one.
JRJ
On 10/14/2015 10:39 PM, ben wrote:
> On 10/14/2015 9:39 PM, Jay Jaeger wrote:
>> I could spare one - but probably only one.
>>
>> JRJ
>>
> Did they ever make punch to make your own?
> Ben.
>
>
On 10/14/2015 9:39 PM, Jay Jaeger wrote:
I could spare one - but probably only one.
JRJ
Did they ever make punch to make your own?
Ben.
I could spare one - but probably only one.
JRJ
On 10/14/2015 4:17 PM, Jay West wrote:
> I found a company selling new 8" 32-sector hard sector floppies.
>
> http://www.athana.com/html/diskette.html Item # 47-0801
>
> They want $150 per box of 10. That's a pretty hefty pricetag... but in the
>
18 matches
Mail list logo
